[alsa-devel] [PATCH v2 03/10] ASoC: Intel: bytcr_rt5640: Enable jack detection
Hans de Goede
hdegoede at redhat.com
Fri May 11 15:29:21 CEST 2018
Add code to support setting jack-detect parameters through quirks and
extend the existing DMI quirk table entries for the Asus T100TA and the
Dell Venue 8 Pro 5830 to enable jack detection.
Tested-by: Hans de Goede <hdegoede at redhat.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
sound/soc/intel/boards/bytcr_rt5640.c | 164 +++++++++++++++++++++++---
1 file changed, 148 insertions(+), 16 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index b5972b7512d5..c69f48ff80c1 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmi.h>
+#include <linux/input.h>
#include <linux/slab.h>
#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
@@ -46,19 +47,46 @@ enum {
BYT_RT5640_IN3_MAP,
};
-#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(7, 0))
-#define BYT_RT5640_MONO_SPEAKER BIT(17)
-#define BYT_RT5640_DIFF_MIC BIT(18) /* defaut is single-ended */
-#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
-#define BYT_RT5640_SSP0_AIF1 BIT(20)
-#define BYT_RT5640_SSP0_AIF2 BIT(21)
-#define BYT_RT5640_MCLK_EN BIT(22)
-#define BYT_RT5640_MCLK_25MHZ BIT(23)
+enum {
+ BYT_RT5640_JD_SRC_GPIO1 = (RT5640_JD_SRC_GPIO1 << 4),
+ BYT_RT5640_JD_SRC_JD1_IN4P = (RT5640_JD_SRC_JD1_IN4P << 4),
+ BYT_RT5640_JD_SRC_JD2_IN4N = (RT5640_JD_SRC_JD2_IN4N << 4),
+ BYT_RT5640_JD_SRC_GPIO2 = (RT5640_JD_SRC_GPIO2 << 4),
+ BYT_RT5640_JD_SRC_GPIO3 = (RT5640_JD_SRC_GPIO3 << 4),
+ BYT_RT5640_JD_SRC_GPIO4 = (RT5640_JD_SRC_GPIO4 << 4),
+};
+
+enum {
+ BYT_RT5640_OVCD_TH_600UA = (6 << 8),
+ BYT_RT5640_OVCD_TH_1500UA = (15 << 8),
+ BYT_RT5640_OVCD_TH_2000UA = (20 << 8),
+};
+
+enum {
+ BYT_RT5640_OVCD_SF_0P5 = (RT5640_OVCD_SF_0P5 << 13),
+ BYT_RT5640_OVCD_SF_0P75 = (RT5640_OVCD_SF_0P75 << 13),
+ BYT_RT5640_OVCD_SF_1P0 = (RT5640_OVCD_SF_1P0 << 13),
+ BYT_RT5640_OVCD_SF_1P5 = (RT5640_OVCD_SF_1P5 << 13),
+};
-/* in-diff or dmic-pin + terminating empty entry */
-#define MAX_NO_PROPS 2
+#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(3, 0))
+#define BYT_RT5640_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4)
+#define BYT_RT5640_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8)
+#define BYT_RT5640_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13)
+#define BYT_RT5640_JD_NOT_INV BIT(16)
+#define BYT_RT5640_MONO_SPEAKER BIT(17)
+#define BYT_RT5640_DIFF_MIC BIT(18) /* default is single-ended */
+#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */
+#define BYT_RT5640_SSP0_AIF1 BIT(20)
+#define BYT_RT5640_SSP0_AIF2 BIT(21)
+#define BYT_RT5640_MCLK_EN BIT(22)
+#define BYT_RT5640_MCLK_25MHZ BIT(23)
+
+/* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */
+#define MAX_NO_PROPS 6
struct byt_rt5640_private {
+ struct snd_soc_jack jack;
struct clk *mclk;
};
static bool is_bytcr;
@@ -95,6 +123,16 @@ static void log_quirks(struct device *dev)
dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map);
break;
}
+ if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
+ dev_info(dev, "quirk realtek,jack-detect-source %ld\n",
+ BYT_RT5640_JDSRC(byt_rt5640_quirk));
+ dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n",
+ BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100);
+ dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n",
+ BYT_RT5640_OVCD_SF(byt_rt5640_quirk));
+ }
+ if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
+ dev_info(dev, "quirk JD_NOT_INV enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
dev_info(dev, "quirk MONO_SPEAKER enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
@@ -330,6 +368,17 @@ static const struct snd_kcontrol_new byt_rt5640_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
};
+static struct snd_soc_jack_pin rt5640_pins[] = {
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -353,6 +402,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
},
.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
BYT_RT5640_MCLK_EN),
},
{
@@ -374,6 +426,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"),
},
.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
BYT_RT5640_MONO_SPEAKER |
BYT_RT5640_MCLK_EN),
},
@@ -463,6 +518,23 @@ static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name)
break;
}
+ if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
+ props[cnt++] = PROPERTY_ENTRY_U32(
+ "realtek,jack-detect-source",
+ BYT_RT5640_JDSRC(byt_rt5640_quirk));
+
+ props[cnt++] = PROPERTY_ENTRY_U32(
+ "realtek,over-current-threshold-microamp",
+ BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100);
+
+ props[cnt++] = PROPERTY_ENTRY_U32(
+ "realtek,over-current-scale-factor",
+ BYT_RT5640_OVCD_SF(byt_rt5640_quirk));
+ }
+
+ if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
+ props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted");
+
ret = device_add_properties(i2c_dev, props);
put_device(i2c_dev);
@@ -480,6 +552,11 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
card->dapm.idle_bias_off = true;
+ /* Start with RC clk for jack-detect (we disable MCLK below) */
+ if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
+ snd_soc_component_update_bits(component, RT5640_GLB_CLK,
+ RT5640_SCLK_SRC_MASK, RT5640_SCLK_SRC_RCCLK);
+
rt5640_sel_asrc_clk_src(component,
RT5640_DA_STEREO_FILTER |
RT5640_DA_MONO_L_FILTER |
@@ -570,11 +647,27 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
else
ret = clk_set_rate(priv->mclk, 19200000);
- if (ret)
+ if (ret) {
dev_err(card->dev, "unable to set MCLK rate\n");
+ return ret;
+ }
}
- return ret;
+ if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
+ ret = snd_soc_card_jack_new(card, "Headset",
+ SND_JACK_HEADSET | SND_JACK_BTN_0,
+ &priv->jack, rt5640_pins,
+ ARRAY_SIZE(rt5640_pins));
+ if (ret) {
+ dev_err(card->dev, "Jack creation failed %d\n", ret);
+ return ret;
+ }
+ snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0,
+ KEY_PLAYPAUSE);
+ snd_soc_component_set_jack(component, &priv->jack, NULL);
+ }
+
+ return 0;
}
static const struct snd_soc_pcm_stream byt_rt5640_dai_params = {
@@ -715,6 +808,47 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = {
};
/* SoC card */
+static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN];
+static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */
+static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
+
+static int byt_rt5640_suspend(struct snd_soc_card *card)
+{
+ struct snd_soc_component *component;
+
+ if (!BYT_RT5640_JDSRC(byt_rt5640_quirk))
+ return 0;
+
+ list_for_each_entry(component, &card->component_dev_list, card_list) {
+ if (!strcmp(component->name, byt_rt5640_codec_name)) {
+ dev_dbg(component->dev, "disabling jack detect before suspend\n");
+ snd_soc_component_set_jack(component, NULL, NULL);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int byt_rt5640_resume(struct snd_soc_card *card)
+{
+ struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+ struct snd_soc_component *component;
+
+ if (!BYT_RT5640_JDSRC(byt_rt5640_quirk))
+ return 0;
+
+ list_for_each_entry(component, &card->component_dev_list, card_list) {
+ if (!strcmp(component->name, byt_rt5640_codec_name)) {
+ dev_dbg(component->dev, "re-enabling jack detect after resume\n");
+ snd_soc_component_set_jack(component, &priv->jack, NULL);
+ break;
+ }
+ }
+
+ return 0;
+}
+
static struct snd_soc_card byt_rt5640_card = {
.name = "bytcr-rt5640",
.owner = THIS_MODULE,
@@ -725,12 +859,10 @@ static struct snd_soc_card byt_rt5640_card = {
.dapm_routes = byt_rt5640_audio_map,
.num_dapm_routes = ARRAY_SIZE(byt_rt5640_audio_map),
.fully_routed = true,
+ .suspend_pre = byt_rt5640_suspend,
+ .resume_post = byt_rt5640_resume,
};
-static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN];
-static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */
-static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
-
static bool is_valleyview(void)
{
static const struct x86_cpu_id cpu_ids[] = {
--
2.17.0
More information about the Alsa-devel
mailing list