[alsa-devel] [PATCH 09/19] ASoC: Intel: bytcr_rt5640: Use device-property for differential mics
Hans de Goede
hdegoede at redhat.com
Tue May 8 17:35:54 CEST 2018
Set the "realtek,in1-differential" or "realtek,in3-differential"
device-property when the BYT_RT5640_DIFF_MIC quirk is set instead of
directly poking the codec registers.
This also fixes the BYT_RT5640_DIFF_MIC quirk not working when
combined with BYT_RT5640_IN3_MAP.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
sound/soc/intel/boards/bytcr_rt5640.c | 48 ++++++++++++++++++++++++---
1 file changed, 43 insertions(+), 5 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 0f587d394b06..81d0d07449a8 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -17,6 +17,7 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -54,6 +55,9 @@ enum {
#define BYT_RT5640_MCLK_EN BIT(22)
#define BYT_RT5640_MCLK_25MHZ BIT(23)
+/* in-diff + terminating empty entry */
+#define MAX_NO_PROPS 2
+
struct byt_rt5640_private {
struct clk *mclk;
};
@@ -438,6 +442,39 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
{}
};
+/*
+ * Note this MUST be called before snd_soc_register_card(), so that the props
+ * are in place before the codec component driver's probe function parses them.
+ */
+static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name)
+{
+ struct property_entry props[MAX_NO_PROPS] = {};
+ struct device *i2c_dev;
+ int ret, cnt = 0;
+
+ i2c_dev = bus_find_device_by_name(&i2c_bus_type, NULL, i2c_dev_name);
+ if (!i2c_dev)
+ return -EPROBE_DEFER;
+
+ switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
+ case BYT_RT5640_IN1_MAP:
+ if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
+ props[cnt++] =
+ PROPERTY_ENTRY_BOOL("realtek,in1-differential");
+ break;
+ case BYT_RT5640_IN3_MAP:
+ if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
+ props[cnt++] =
+ PROPERTY_ENTRY_BOOL("realtek,in3-differential");
+ break;
+ }
+
+ ret = device_add_properties(i2c_dev, props);
+ put_device(i2c_dev);
+
+ return ret;
+}
+
static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
{
struct snd_soc_card *card = runtime->card;
@@ -519,11 +556,6 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
if (ret)
return ret;
- if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) {
- snd_soc_component_update_bits(component, RT5640_IN1_IN2, RT5640_IN_DF1,
- RT5640_IN_DF1);
- }
-
if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
ret = rt5640_dmic_enable(component, 0, 0);
if (ret)
@@ -837,6 +869,12 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
(unsigned int)byt_rt5640_quirk, quirk_override);
byt_rt5640_quirk = quirk_override;
}
+
+ /* Must be called before register_card, also see declaration comment. */
+ ret_val = byt_rt5640_add_codec_device_props(byt_rt5640_codec_name);
+ if (ret_val)
+ return ret_val;
+
log_quirks(&pdev->dev);
if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) ||
--
2.17.0
More information about the Alsa-devel
mailing list