[alsa-devel] [PATCH] ASoC: uniphier: add digital output volume for UniPhier sound system
Katsuhiro Suzuki
suzuki.katsuhiro at socionext.com
Tue May 8 05:16:39 CEST 2018
This patch adds controllers for digital volume of PCM output. Volume
effects simply linear, not dB scale as follows:
Gained PCM = Original * 0x4000 / Volume
The value range of volume is from 0x0001 to 0xffff. 0x0000 works as
mute. Initial value is 0x4000 (+0dB).
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro at socionext.com>
---
sound/soc/uniphier/aio-core.c | 58 ++++++++++++++
sound/soc/uniphier/aio-cpu.c | 140 ++++++++++++++++++++++++++++++++++
sound/soc/uniphier/aio-reg.h | 33 ++++++--
sound/soc/uniphier/aio.h | 7 ++
4 files changed, 233 insertions(+), 5 deletions(-)
diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c
index e37b80921abb..638cb3fc5f7b 100644
--- a/sound/soc/uniphier/aio-core.c
+++ b/sound/soc/uniphier/aio-core.c
@@ -659,6 +659,64 @@ void aio_port_set_enable(struct uniphier_aio_sub *sub, int enable)
}
}
+/**
+ * aio_port_get_volume - get volume of AIO port block
+ * @sub: the AIO substream pointer
+ *
+ * Return: current volume, range is 0x0000 - 0xffff
+ */
+int aio_port_get_volume(struct uniphier_aio_sub *sub)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ u32 v;
+
+ regmap_read(r, OPORTMXTYVOLGAINSTATUS(sub->swm->oport.map, 0), &v);
+
+ return FIELD_GET(OPORTMXTYVOLGAINSTATUS_CUR_MASK, v);
+}
+
+/**
+ * aio_port_set_volume - set volume of AIO port block
+ * @sub: the AIO substream pointer
+ * @vol: target volume, range is 0x0000 - 0xffff.
+ *
+ * Change digital volume and perfome fade-out/fade-in effect for specified
+ * output slot of port. Gained PCM value can calculate as the following:
+ * Gained = Original * vol / 0x4000
+ */
+void aio_port_set_volume(struct uniphier_aio_sub *sub, int vol)
+{
+ struct regmap *r = sub->aio->chip->regmap;
+ int oport_map = sub->swm->oport.map;
+ int cur, diff, slope = 0, fs;
+
+ if (sub->swm->dir == PORT_DIR_INPUT)
+ return;
+
+ cur = aio_port_get_volume(sub);
+ diff = abs(vol - cur);
+ fs = params_rate(&sub->params);
+ if (fs)
+ slope = diff / AUD_VOL_FADE_TIME * 1000 / fs;
+ slope = max(1, slope);
+
+ regmap_update_bits(r, OPORTMXTYVOLPARA1(oport_map, 0),
+ OPORTMXTYVOLPARA1_SLOPEU_MASK, slope << 16);
+ regmap_update_bits(r, OPORTMXTYVOLPARA2(oport_map, 0),
+ OPORTMXTYVOLPARA2_TARGET_MASK, vol);
+
+ if (cur < vol)
+ regmap_update_bits(r, OPORTMXTYVOLPARA2(oport_map, 0),
+ OPORTMXTYVOLPARA2_FADE_MASK,
+ OPORTMXTYVOLPARA2_FADE_FADEIN);
+ else
+ regmap_update_bits(r, OPORTMXTYVOLPARA2(oport_map, 0),
+ OPORTMXTYVOLPARA2_FADE_MASK,
+ OPORTMXTYVOLPARA2_FADE_FADEOUT);
+
+ regmap_write(r, AOUTFADECTR0, BIT(oport_map));
+}
+
/**
* aio_if_set_param - set parameters of AIO DMA I/F block
* @sub: the AIO substream pointer
diff --git a/sound/soc/uniphier/aio-cpu.c b/sound/soc/uniphier/aio-cpu.c
index 00b6441bf195..80daec17be25 100644
--- a/sound/soc/uniphier/aio-cpu.c
+++ b/sound/soc/uniphier/aio-cpu.c
@@ -32,6 +32,35 @@ static bool is_valid_pll(struct uniphier_aio_chip *chip, int pll_id)
return chip->plls[pll_id].enable;
}
+/**
+ * find_volume - find volume supported HW port by HW port number
+ * @chip: the AIO chip pointer
+ * @oport_hw: HW port number, one of AUD_HW_XXXX
+ *
+ * Find AIO device from device list by HW port number. Volume feature is
+ * available only in Output and PCM ports, this limitation comes from HW
+ * specifications.
+ *
+ * Return: The pointer of AIO substream if successful, otherwise NULL on error.
+ */
+static struct uniphier_aio_sub *find_volume(struct uniphier_aio_chip *chip,
+ int oport_hw)
+{
+ int i;
+
+ for (i = 0; i < chip->num_aios; i++) {
+ struct uniphier_aio_sub *sub = &chip->aios[i].sub[0];
+
+ if (!sub->swm)
+ continue;
+
+ if (sub->swm->oport.hw == oport_hw)
+ return sub;
+ }
+
+ return NULL;
+}
+
static bool match_spec(const struct uniphier_aio_spec *spec,
const char *name, int dir)
{
@@ -287,6 +316,7 @@ static int uniphier_aio_hw_params(struct snd_pcm_substream *substream,
sub->setting = 1;
aio_port_reset(sub);
+ aio_port_set_volume(sub, sub->vol);
aio_src_reset(sub);
return 0;
@@ -373,6 +403,8 @@ int uniphier_aio_dai_probe(struct snd_soc_dai *dai)
sub->swm = &spec->swm;
sub->spec = spec;
+
+ sub->vol = AUD_VOL_INIT;
}
aio_iecout_set_enable(aio->chip, true);
@@ -449,8 +481,116 @@ int uniphier_aio_dai_resume(struct snd_soc_dai *dai)
}
EXPORT_SYMBOL_GPL(uniphier_aio_dai_resume);
+static int uniphier_aio_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = AUD_VOL_MAX;
+
+ return 0;
+}
+
+static int uniphier_aio_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+ struct uniphier_aio_chip *chip = snd_soc_component_get_drvdata(comp);
+ struct uniphier_aio_sub *sub;
+ int oport_hw = kcontrol->private_value;
+
+ sub = find_volume(chip, oport_hw);
+ if (!sub)
+ return 0;
+
+ ucontrol->value.integer.value[0] = sub->vol;
+
+ return 0;
+}
+
+static int uniphier_aio_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+ struct uniphier_aio_chip *chip = snd_soc_component_get_drvdata(comp);
+ struct uniphier_aio_sub *sub;
+ int oport_hw = kcontrol->private_value;
+
+ sub = find_volume(chip, oport_hw);
+ if (!sub)
+ return 0;
+
+ if (sub->vol == ucontrol->value.integer.value[0])
+ return 0;
+ sub->vol = ucontrol->value.integer.value[0];
+
+ aio_port_set_volume(sub, sub->vol);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new uniphier_aio_controls[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "HPCMOUT1 Volume",
+ .info = uniphier_aio_vol_info,
+ .get = uniphier_aio_vol_get,
+ .put = uniphier_aio_vol_put,
+ .private_value = AUD_HW_HPCMOUT1,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "PCMOUT1 Volume",
+ .info = uniphier_aio_vol_info,
+ .get = uniphier_aio_vol_get,
+ .put = uniphier_aio_vol_put,
+ .private_value = AUD_HW_PCMOUT1,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "PCMOUT2 Volume",
+ .info = uniphier_aio_vol_info,
+ .get = uniphier_aio_vol_get,
+ .put = uniphier_aio_vol_put,
+ .private_value = AUD_HW_PCMOUT2,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "PCMOUT3 Volume",
+ .info = uniphier_aio_vol_info,
+ .get = uniphier_aio_vol_get,
+ .put = uniphier_aio_vol_put,
+ .private_value = AUD_HW_PCMOUT3,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "HIECOUT1 Volume",
+ .info = uniphier_aio_vol_info,
+ .get = uniphier_aio_vol_get,
+ .put = uniphier_aio_vol_put,
+ .private_value = AUD_HW_HIECOUT1,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "IECOUT1 Volume",
+ .info = uniphier_aio_vol_info,
+ .get = uniphier_aio_vol_get,
+ .put = uniphier_aio_vol_put,
+ .private_value = AUD_HW_IECOUT1,
+ },
+};
+
static const struct snd_soc_component_driver uniphier_aio_component = {
.name = "uniphier-aio",
+ .controls = uniphier_aio_controls,
+ .num_controls = ARRAY_SIZE(uniphier_aio_controls),
};
int uniphier_aio_probe(struct platform_device *pdev)
diff --git a/sound/soc/uniphier/aio-reg.h b/sound/soc/uniphier/aio-reg.h
index 511ea3c01847..45fdc6ae358a 100644
--- a/sound/soc/uniphier/aio-reg.h
+++ b/sound/soc/uniphier/aio-reg.h
@@ -169,6 +169,7 @@
#define PBINMXPAUSECTR1(n) (0x20208 + 0x40 * (n))
/* AOUT */
+#define AOUTFADECTR0 0x40020
#define AOUTENCTR0 0x40040
#define AOUTENCTR1 0x40044
#define AOUTENCTR2 0x40048
@@ -179,6 +180,9 @@
#define AOUTSRCRSTCTR1 0x400c4
#define AOUTSRCRSTCTR2 0x400c8
+/* AOUT PCMOUT has 5 slots, slot0-3: D0-3, slot4: DMIX */
+#define OPORT_SLOT_MAX 5
+
/* AOUT(PCMOUTN) */
#define OPORTMXCTR1(n) (0x42000 + 0x400 * (n))
#define OPORTMXCTR1_I2SLRSEL_MASK (0x11 << 10)
@@ -359,11 +363,30 @@
#define OPORTMXMASK_XCKMSK_ON (0x0 << 0)
#define OPORTMXMASK_XCKMSK_OFF (0x7 << 0)
#define OPORTMXDEBUG(n) (0x420fc + 0x400 * (n))
-#define OPORTMXT0RSTCTR(n) (0x4211c + 0x400 * (n))
-#define OPORTMXT1RSTCTR(n) (0x4213c + 0x400 * (n))
-#define OPORTMXT2RSTCTR(n) (0x4215c + 0x400 * (n))
-#define OPORTMXT3RSTCTR(n) (0x4217c + 0x400 * (n))
-#define OPORTMXT4RSTCTR(n) (0x4219c + 0x400 * (n))
+#define OPORTMXTYVOLPARA1(n, m) (0x42100 + 0x400 * (n) + 0x20 * (m))
+#define OPORTMXTYVOLPARA1_SLOPEU_MASK GENMASK(31, 16)
+#define OPORTMXTYVOLPARA2(n, m) (0x42104 + 0x400 * (n) + 0x20 * (m))
+#define OPORTMXTYVOLPARA2_FADE_MASK GENMASK(17, 16)
+#define OPORTMXTYVOLPARA2_FADE_NOOP (0x0 << 16)
+#define OPORTMXTYVOLPARA2_FADE_FADEOUT (0x1 << 16)
+#define OPORTMXTYVOLPARA2_FADE_FADEIN (0x2 << 16)
+#define OPORTMXTYVOLPARA2_TARGET_MASK GENMASK(15, 0)
+#define OPORTMXTYVOLGAINSTATUS(n, m) (0x42108 + 0x400 * (n) + 0x20 * (m))
+#define OPORTMXTYVOLGAINSTATUS_CUR_MASK GENMASK(15, 0)
+#define OPORTMXTYSLOTCTR(n, m) (0x42114 + 0x400 * (n) + 0x20 * (m))
+#define OPORTMXTYSLOTCTR_SLOTSEL_MASK GENMASK(11, 8)
+#define OPORTMXTYSLOTCTR_SLOTSEL_SLOT0 (0x8 << 8)
+#define OPORTMXTYSLOTCTR_SLOTSEL_SLOT1 (0x9 << 8)
+#define OPORTMXTYSLOTCTR_SLOTSEL_SLOT2 (0xa << 8)
+#define OPORTMXTYSLOTCTR_SLOTSEL_SLOT3 (0xb << 8)
+#define OPORTMXTYSLOTCTR_SLOTSEL_SLOT4 (0xc << 8)
+#define OPORTMXT0SLOTCTR_MUTEOFF_MASK BIT(1)
+#define OPORTMXT0SLOTCTR_MUTEOFF_MUTE (0x0 << 1)
+#define OPORTMXT0SLOTCTR_MUTEOFF_UNMUTE (0x1 << 1)
+#define OPORTMXTYRSTCTR(n, m) (0x4211c + 0x400 * (n) + 0x20 * (m))
+#define OPORTMXT0RSTCTR_RST_MASK BIT(1)
+#define OPORTMXT0RSTCTR_RST_OFF (0x0 << 1)
+#define OPORTMXT0RSTCTR_RST_ON (0x1 << 1)
#define SBF_(frame, shift) (((frame) * 2 - 1) << shift)
diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h
index 52670126084f..aa89c2f6fa24 100644
--- a/sound/soc/uniphier/aio.h
+++ b/sound/soc/uniphier/aio.h
@@ -130,6 +130,10 @@ enum IEC61937_PC {
#define AUD_PLLDIV_1_1 2
#define AUD_PLLDIV_2_3 3
+#define AUD_VOL_INIT 0x4000 /* +0dB */
+#define AUD_VOL_MAX 0xffff /* +6dB */
+#define AUD_VOL_FADE_TIME 20 /* 20ms */
+
#define AUD_RING_SIZE (128 * 1024)
#define AUD_MIN_FRAGMENT 4
@@ -231,6 +235,7 @@ struct uniphier_aio_sub {
/* For PCM audio */
struct snd_pcm_substream *substream;
struct snd_pcm_hw_params params;
+ int vol;
/* For compress audio */
struct snd_compr_stream *cstream;
@@ -323,6 +328,8 @@ int aio_port_set_clk(struct uniphier_aio_sub *sub);
int aio_port_set_param(struct uniphier_aio_sub *sub, int pass_through,
const struct snd_pcm_hw_params *params);
void aio_port_set_enable(struct uniphier_aio_sub *sub, int enable);
+int aio_port_get_volume(struct uniphier_aio_sub *sub);
+void aio_port_set_volume(struct uniphier_aio_sub *sub, int vol);
int aio_if_set_param(struct uniphier_aio_sub *sub, int pass_through);
int aio_oport_set_stream_type(struct uniphier_aio_sub *sub,
enum IEC61937_PC pc);
--
2.17.0
More information about the Alsa-devel
mailing list