[alsa-devel] [PATCH 3/9] Add PCI region2 iomap for SBZ

[Takashi Iwai]

On Thu, 03 May 2018 23:42:44 +0200,
Connor McAdams wrote:
> 
> @@ -4691,8 +4699,17 @@ static void ca0132_free(struct hda_codec *codec)
>  
>  	cancel_delayed_work_sync(&spec->unsol_hp_work);
>  	snd_hda_power_up(codec);
> -	snd_hda_sequence_write(codec, spec->base_exit_verbs);
> -	ca0132_exit_chip(codec);
> +	switch (spec->quirk) {
> +	case QUIRK_SBZ:
> +		iounmap(spec->mem_base);
> +		snd_hda_sequence_write(codec, spec->base_exit_verbs);
> +		ca0132_exit_chip(codec);
> +		break;

Do you need to unmap before the rest procedure?
Usually the unmapping happens at the last, after all commands
finished.

> +	default:
> +		snd_hda_sequence_write(codec, spec->base_exit_verbs);
> +		ca0132_exit_chip(codec);
> +		break;
> +	}
>  	snd_hda_power_down(codec);
>  	kfree(spec->spec_init_verbs);
>  	kfree(codec->spec);

So in this case, a cleaner way would be to add the conditional iounmap
like:

  	snd_hda_power_down(codec);
	if (spec->mem_base)
		iounmap(spec->mem_base);
  	kfree(spec->spec_init_verbs);
  	kfree(codec->spec);
	
> @@ -4909,6 +4926,15 @@ static int patch_ca0132(struct hda_codec *codec)
>  	else
>  		spec->quirk = QUIRK_NONE;
>  
> +	/* Setup BAR Region 2 for Sound Blaster Z */
> +	if (spec->quirk == QUIRK_SBZ) {
> +		spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20);
> +		if (spec->mem_base == NULL) {
> +			codec_dbg(codec, "pci_iomap failed!");
> +			codec_dbg(codec, "perhaps this is not an SBZ?");

This should be shown more explicitly, so better to be codec_warn() or
codec_info().


thanks,

Takashi