[alsa-devel] omap4-droid4: voice call support was Re: [PATCHv5, 5/5] ARM: dts: omap4-droid4: add soundcard

[Sebastian Reichel]

Hi,

On Thu, Mar 29, 2018 at 09:06:11AM -0700, Tony Lindgren wrote:
> * Sebastian Reichel <sebastian.reichel at collabora.co.uk> [180329 15:47]:
> > Hi,
> > 
> > On Thu, Mar 29, 2018 at 06:59:04AM -0700, Tony Lindgren wrote:
> > > > I think cpcap is always the clock and frame master, but I think
> > > > mdm6600 is the remote side and OMAP is not involved at all.
> > > 
> > > OK. So could it be just an alsamixer on/off toggle then for
> > > "Modem" or something similar?
> > 
> > I think so. We might want to have an "Mode" enum instead, though.
> > That can be extended, once we unlock the other modes (bluetooth,
> > bluetooth call).
> 
> OK. Seems in addition to the "Mode" enum, we also need
> some other switch for modem on and off toggle?

I don't think so. DAPM should automatically power on/off the
modem if there is a valid path from some CPCAP output/input.
Since the mode enum will "disconnect" the modem in the DAPM
graph, it should be enabled/disabled automatically.

> I guess most people want to save the preferred "Mode" enum,
> then for the duration of the call enable the selected mode.
> 
> And I guess the mute is already there for the mic with 'm'
> in alsamixer for conf calls :)

Yes.

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20180330/2756d7ef/attachment.sig>