[alsa-devel] [PATCH 2/7] ASoC: amd: dma descriptor changes for BT I2S Instance
Vijendar Mukunda
Vijendar.Mukunda at amd.com
Mon Mar 12 07:34:15 CET 2018
As Stoney has SRAM memory limitation ,to support
playback & capture on both the I2S controller instances
audio buffer size is reduced to 8k.
For playback on I2S SP instance sram bank 1 will be used.
For capture on I2S SP instance sram bank 2 will be used.
For playback on I2S BT instance sram bank 3 will be used.
For capture on I2S BT instance sram bank 4 will be used.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda at amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
---
sound/soc/amd/acp-pcm-dma.c | 106 ++++++++++++++++++++++++++++++++++----------
sound/soc/amd/acp.h | 41 +++++++++++++++--
2 files changed, 120 insertions(+), 27 deletions(-)
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 4611706..f401006 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -37,7 +37,7 @@
#define MAX_BUFFER (PLAYBACK_MAX_PERIOD_SIZE * PLAYBACK_MAX_NUM_PERIODS)
#define MIN_BUFFER MAX_BUFFER
-#define ST_PLAYBACK_MAX_PERIOD_SIZE 8192
+#define ST_PLAYBACK_MAX_PERIOD_SIZE 4096
#define ST_CAPTURE_MAX_PERIOD_SIZE ST_PLAYBACK_MAX_PERIOD_SIZE
#define ST_MAX_BUFFER (ST_PLAYBACK_MAX_PERIOD_SIZE * PLAYBACK_MAX_NUM_PERIODS)
#define ST_MIN_BUFFER ST_MAX_BUFFER
@@ -320,42 +320,99 @@ static void config_acp_dma(void __iomem *acp_mmio,
u16 ch1, ch2, destination, dma_dscr_idx;
if (audio_config->direction == SNDRV_PCM_STREAM_PLAYBACK) {
- pte_offset = ACP_PLAYBACK_PTE_OFFSET;
- ch1 = SYSRAM_TO_ACP_CH_NUM;
- ch2 = ACP_TO_I2S_DMA_CH_NUM;
- sram_bank = ACP_SHARED_RAM_BANK_1_ADDRESS;
- destination = TO_ACP_I2S_1;
-
- } else {
- pte_offset = ACP_CAPTURE_PTE_OFFSET;
- ch1 = SYSRAM_TO_ACP_CH_NUM;
- ch2 = ACP_TO_I2S_DMA_CH_NUM;
- switch (asic_type) {
- case CHIP_STONEY:
+ switch (audio_config->i2s_play_instance) {
+ case I2S_BT_INSTANCE:
+ pte_offset = ACP_ST_I2S_BT_PLAYBACK_PTE_OFFSET;
+ ch1 = SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM;
+ ch2 = ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM;
sram_bank = ACP_SHARED_RAM_BANK_3_ADDRESS;
+ destination = TO_BLUETOOTH;
break;
+ case I2S_SP_INSTANCE:
default:
- sram_bank = ACP_SHARED_RAM_BANK_5_ADDRESS;
+ switch (asic_type) {
+ case CHIP_STONEY:
+ pte_offset = ACP_ST_I2S_SP_PLAYBACK_PTE_OFFSET;
+ break;
+ default:
+ pte_offset = ACP_PLAYBACK_PTE_OFFSET;
+ }
+ ch1 = SYSRAM_TO_ACP_CH_NUM;
+ ch2 = ACP_TO_I2S_DMA_CH_NUM;
+ sram_bank = ACP_SHARED_RAM_BANK_1_ADDRESS;
+ destination = TO_ACP_I2S_1;
+ }
+ } else {
+ switch (audio_config->i2s_capture_instance) {
+ case I2S_BT_INSTANCE:
+ pte_offset = ACP_ST_I2S_BT_CAPTURE_PTE_OFFSET;
+ ch1 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
+ ch2 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+ sram_bank = ACP_SHARED_RAM_BANK_4_ADDRESS;
+ destination = FROM_BLUETOOTH;
+ break;
+ case I2S_SP_INSTANCE:
+ default:
+ pte_offset = ACP_CAPTURE_PTE_OFFSET;
+ ch1 = SYSRAM_TO_ACP_CH_NUM;
+ ch2 = ACP_TO_I2S_DMA_CH_NUM;
+ switch (asic_type) {
+ case CHIP_STONEY:
+ sram_bank = ACP_SHARED_RAM_BANK_2_ADDRESS;
+ break;
+ default:
+ sram_bank = ACP_SHARED_RAM_BANK_5_ADDRESS;
+ }
+ destination = FROM_ACP_I2S_1;
}
- destination = FROM_ACP_I2S_1;
}
acp_pte_config(acp_mmio, audio_config->pg, audio_config->num_of_pages,
pte_offset);
- if (audio_config->direction == SNDRV_PCM_STREAM_PLAYBACK)
- dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH12;
- else
- dma_dscr_idx = CAPTURE_START_DMA_DESCR_CH14;
+ if (audio_config->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ switch (audio_config->i2s_play_instance) {
+ case I2S_BT_INSTANCE:
+ dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH8;
+ break;
+ case I2S_SP_INSTANCE:
+ default:
+ dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH12;
+ }
+ } else {
+ switch (audio_config->i2s_capture_instance) {
+ case I2S_BT_INSTANCE:
+ dma_dscr_idx = CAPTURE_START_DMA_DESCR_CH10;
+ break;
+ case I2S_SP_INSTANCE:
+ default:
+ dma_dscr_idx = CAPTURE_START_DMA_DESCR_CH14;
+ }
+ }
/* Configure System memory <-> ACP SRAM DMA descriptors */
set_acp_sysmem_dma_descriptors(acp_mmio, audio_config->size,
audio_config->direction, pte_offset,
ch1, sram_bank, dma_dscr_idx, asic_type);
- if (audio_config->direction == SNDRV_PCM_STREAM_PLAYBACK)
- dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH13;
- else
- dma_dscr_idx = CAPTURE_START_DMA_DESCR_CH15;
+ if (audio_config->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ switch (audio_config->i2s_play_instance) {
+ case I2S_BT_INSTANCE:
+ dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH9;
+ break;
+ case I2S_SP_INSTANCE:
+ default:
+ dma_dscr_idx = PLAYBACK_START_DMA_DESCR_CH13;
+ }
+ } else {
+ switch (audio_config->i2s_capture_instance) {
+ case I2S_BT_INSTANCE:
+ dma_dscr_idx = CAPTURE_START_DMA_DESCR_CH11;
+ break;
+ case I2S_SP_INSTANCE:
+ default:
+ dma_dscr_idx = CAPTURE_START_DMA_DESCR_CH15;
+ }
+ }
/* Configure ACP SRAM <-> I2S DMA descriptors */
set_acp_to_i2s_dma_descriptors(acp_mmio, audio_config->size,
audio_config->direction, sram_bank,
@@ -385,6 +442,9 @@ static void acp_dma_start(void __iomem *acp_mmio,
case ACP_TO_I2S_DMA_CH_NUM:
case ACP_TO_SYSRAM_CH_NUM:
case I2S_TO_ACP_DMA_CH_NUM:
+ case ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM:
+ case ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM:
+ case I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM:
dma_ctrl |= ACP_DMA_CNTL_0__DMAChIOCEn_MASK;
break;
default:
diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
index e8406b9..d40749a 100644
--- a/sound/soc/amd/acp.h
+++ b/sound/soc/amd/acp.h
@@ -10,17 +10,29 @@
#define ACP_PLAYBACK_PTE_OFFSET 10
#define ACP_CAPTURE_PTE_OFFSET 0
+/* Playback and Capture Offset for Stoney */
+#define ACP_ST_I2S_SP_PLAYBACK_PTE_OFFSET 0x04
+#define ACP_ST_I2S_SP_CAPTURE_PTE_OFFSET 0x00
+#define ACP_ST_I2S_BT_PLAYBACK_PTE_OFFSET 0x08
+#define ACP_ST_I2S_BT_CAPTURE_PTE_OFFSET 0x0c
+
#define ACP_GARLIC_CNTL_DEFAULT 0x00000FB4
#define ACP_ONION_CNTL_DEFAULT 0x00000FB4
#define ACP_PHYSICAL_BASE 0x14000
-/* Playback SRAM address (as a destination in dma descriptor) */
+/* In case of I2S SP controller instance, Stoney uses SRAM bank 1 for
+ * playback and SRAM Bank 2 for capture where as in case of BT I2S
+ * Instance ,Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will
+ * be used for capture.Carrizo uses I2S SP controller instance.SRAM Banks
+ * 1,2,3,4 will be used for playback & SRAM Banks 5,6,7,8 will be used
+ * for capture scenario.
+ */
#define ACP_SHARED_RAM_BANK_1_ADDRESS 0x4002000
-
-/* Capture SRAM address (as a source in dma descriptor) */
-#define ACP_SHARED_RAM_BANK_5_ADDRESS 0x400A000
+#define ACP_SHARED_RAM_BANK_2_ADDRESS 0x4004000
#define ACP_SHARED_RAM_BANK_3_ADDRESS 0x4006000
+#define ACP_SHARED_RAM_BANK_4_ADDRESS 0x4008000
+#define ACP_SHARED_RAM_BANK_5_ADDRESS 0x400A000
#define ACP_DMA_RESET_TIME 10000
#define ACP_CLOCK_EN_TIME_OUT_VALUE 0x000000FF
@@ -35,8 +47,10 @@
#define TO_ACP_I2S_1 0x2
#define TO_ACP_I2S_2 0x4
+#define TO_BLUETOOTH 0x3
#define FROM_ACP_I2S_1 0xa
#define FROM_ACP_I2S_2 0xb
+#define FROM_BLUETOOTH 0xb
#define ACP_TILE_ON_MASK 0x03
#define ACP_TILE_OFF_MASK 0x02
@@ -57,6 +71,14 @@
#define ACP_TO_SYSRAM_CH_NUM 14
#define I2S_TO_ACP_DMA_CH_NUM 15
+/* Playback DMA Channels for I2S BT instance */
+#define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM 8
+#define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9
+
+/* Capture DMA Channels for I2S BT Instance */
+#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 10
+#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 11
+
#define NUM_DSCRS_PER_CHANNEL 2
#define PLAYBACK_START_DMA_DESCR_CH12 0
@@ -69,6 +91,17 @@
#define CAPTURE_START_DMA_DESCR_CH15 6
#define CAPTURE_END_DMA_DESCR_CH15 7
+/* I2S BT Instance DMA Descriptors */
+#define PLAYBACK_START_DMA_DESCR_CH8 8
+#define PLAYBACK_END_DMA_DESCR_CH8 9
+#define PLAYBACK_START_DMA_DESCR_CH9 10
+#define PLAYBACK_END_DMA_DESCR_CH9 11
+
+#define CAPTURE_START_DMA_DESCR_CH10 12
+#define CAPTURE_END_DMA_DESCR_CH10 13
+#define CAPTURE_START_DMA_DESCR_CH11 14
+#define CAPTURE_END_DMA_DESCR_CH11 15
+
#define mmACP_I2S_16BIT_RESOLUTION_EN 0x5209
#define ACP_I2S_MIC_16BIT_RESOLUTION_EN 0x01
#define ACP_I2S_SP_16BIT_RESOLUTION_EN 0x02
--
2.7.4
More information about the Alsa-devel
mailing list