[alsa-devel] [PATCH v3 03/22] ASoC: rt5651: Configure jack-detect source through a device-property
Hans de Goede
hdegoede at redhat.com
Sun Mar 4 15:35:51 CET 2018
Configure the jack-detect source through a device-property which can be
set by code outside of the codec driver. Rather then putting platform
specific DMI quirks inside the generic codec driver.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
Changes in v3
-Split out the machine-driver and dt-bindings changes into separate patches,
keeping just the codec driver changes in this patch
Changes in v2:
-New patch in v2 of this patch-set
---
include/sound/rt5651.h | 4 ++++
sound/soc/codecs/rt5651.c | 33 +++++++--------------------------
2 files changed, 11 insertions(+), 26 deletions(-)
diff --git a/include/sound/rt5651.h b/include/sound/rt5651.h
index 1612462bf5ad..725b36c329d0 100644
--- a/include/sound/rt5651.h
+++ b/include/sound/rt5651.h
@@ -11,6 +11,10 @@
#ifndef __LINUX_SND_RT5651_H
#define __LINUX_SND_RT5651_H
+/*
+ * Note these MUST match the values from the DT binding:
+ * Documentation/devicetree/bindings/sound/rt5651.txt
+ */
enum rt5651_jd_src {
RT5651_JD_NULL,
RT5651_JD1_1,
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index 7bff5cda61fd..f80b3da4667f 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -19,7 +19,6 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/acpi.h>
-#include <linux/dmi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -32,8 +31,6 @@
#include "rl6231.h"
#include "rt5651.h"
-#define RT5651_JD_MAP(quirk) ((quirk) & GENMASK(7, 0))
-
#define RT5651_DEVICE_ID_VALUE 0x6281
#define RT5651_PR_RANGE_BASE (0xff + 1)
@@ -41,8 +38,6 @@
#define RT5651_PR_BASE (RT5651_PR_RANGE_BASE + (0 * RT5651_PR_SPACING))
-static unsigned long rt5651_quirk;
-
static const struct regmap_range_cfg rt5651_ranges[] = {
{ .name = "PR", .range_min = RT5651_PR_BASE,
.range_max = RT5651_PR_BASE + 0xb4,
@@ -1675,6 +1670,9 @@ static int rt5651_set_jack(struct snd_soc_component *component,
*/
static void rt5651_apply_properties(struct snd_soc_component *component)
{
+ struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component);
+ u32 val;
+
if (device_property_read_bool(component->dev, "realtek,in2-differential"))
snd_soc_component_update_bits(component, RT5651_IN1_IN2,
RT5651_IN_DF2, RT5651_IN_DF2);
@@ -1682,6 +1680,10 @@ static void rt5651_apply_properties(struct snd_soc_component *component)
if (device_property_read_bool(component->dev, "realtek,dmic-en"))
snd_soc_component_update_bits(component, RT5651_GPIO_CTRL1,
RT5651_GP2_PIN_MASK, RT5651_GP2_PIN_DMIC1_SCL);
+
+ if (device_property_read_u32(component->dev,
+ "realtek,jack-detect-source", &val) == 0)
+ rt5651->jd_src = val;
}
static int rt5651_probe(struct snd_soc_component *component)
@@ -1832,24 +1834,6 @@ static const struct i2c_device_id rt5651_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, rt5651_i2c_id);
-static int rt5651_quirk_cb(const struct dmi_system_id *id)
-{
- rt5651_quirk = (unsigned long) id->driver_data;
- return 1;
-}
-
-static const struct dmi_system_id rt5651_quirk_table[] = {
- {
- .callback = rt5651_quirk_cb,
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "KIANO"),
- DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"),
- },
- .driver_data = (unsigned long *) RT5651_JD1_1,
- },
- {}
-};
-
static int rt5651_jack_detect(struct snd_soc_component *component, int jack_insert)
{
int jack_type;
@@ -1917,9 +1901,6 @@ static int rt5651_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt5651);
- dmi_check_system(rt5651_quirk_table);
- rt5651->jd_src = RT5651_JD_MAP(rt5651_quirk);
-
rt5651->regmap = devm_regmap_init_i2c(i2c, &rt5651_regmap);
if (IS_ERR(rt5651->regmap)) {
ret = PTR_ERR(rt5651->regmap);
--
2.14.3
More information about the Alsa-devel
mailing list