[alsa-devel] [PATCH 2/2] ASoC: wm_adsp: Simplify handling of alg offset and length
Charles Keepax
ckeepax at opensource.cirrus.com
Wed Jun 20 12:56:21 CEST 2018
The current code that reads the algorithm list from the DSP is
somewhat unclear, it converts directly from bytes to registers using
a hard coded divide by 2. Most offsets are usually handled in DSP
words within the driver and there is a function specifically for
converting from words to register addresses. So update the handling
to use these. This also removes the assumption that the registers
are 16-bit word addressed, which will no longer be true on some of
our newer parts.
Signed-off-by: Charles Keepax <ckeepax at opensource.cirrus.com>
---
sound/soc/codecs/wm_adsp.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 2fcdd84021a5..07c17acc8a4f 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -1871,9 +1871,11 @@ static void wm_adsp_ctl_fixup_base(struct wm_adsp *dsp,
}
static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs,
+ const struct wm_adsp_region *mem,
unsigned int pos, unsigned int len)
{
void *alg;
+ unsigned int reg;
int ret;
__be32 val;
@@ -1888,7 +1890,9 @@ static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs,
}
/* Read the terminator first to validate the length */
- ret = regmap_raw_read(dsp->regmap, pos + len, &val, sizeof(val));
+ reg = wm_adsp_region_to_reg(mem, pos + len);
+
+ ret = regmap_raw_read(dsp->regmap, reg, &val, sizeof(val));
if (ret != 0) {
adsp_err(dsp, "Failed to read algorithm list end: %d\n",
ret);
@@ -1897,13 +1901,18 @@ static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs,
if (be32_to_cpu(val) != 0xbedead)
adsp_warn(dsp, "Algorithm list end %x 0x%x != 0xbedead\n",
- pos + len, be32_to_cpu(val));
+ reg, be32_to_cpu(val));
+
+ /* Convert length from DSP words to bytes */
+ len *= sizeof(u32);
alg = kcalloc(len, 2, GFP_KERNEL | GFP_DMA);
if (!alg)
return ERR_PTR(-ENOMEM);
- ret = regmap_raw_read(dsp->regmap, pos, alg, len * 2);
+ reg = wm_adsp_region_to_reg(mem, pos);
+
+ ret = regmap_raw_read(dsp->regmap, reg, alg, len);
if (ret != 0) {
adsp_err(dsp, "Failed to read algorithm list: %d\n", ret);
kfree(alg);
@@ -2002,10 +2011,11 @@ static int wm_adsp1_setup_algs(struct wm_adsp *dsp)
if (IS_ERR(alg_region))
return PTR_ERR(alg_region);
- pos = sizeof(adsp1_id) / 2;
- len = (sizeof(*adsp1_alg) * n_algs) / 2;
+ /* Calculate offset and length in DSP words */
+ pos = sizeof(adsp1_id) / sizeof(u32);
+ len = (sizeof(*adsp1_alg) * n_algs) / sizeof(u32);
- adsp1_alg = wm_adsp_read_algs(dsp, n_algs, mem->base + pos, len);
+ adsp1_alg = wm_adsp_read_algs(dsp, n_algs, mem, pos, len);
if (IS_ERR(adsp1_alg))
return PTR_ERR(adsp1_alg);
@@ -2113,10 +2123,11 @@ static int wm_adsp2_setup_algs(struct wm_adsp *dsp)
if (IS_ERR(alg_region))
return PTR_ERR(alg_region);
- pos = sizeof(adsp2_id) / 2;
- len = (sizeof(*adsp2_alg) * n_algs) / 2;
+ /* Calculate offset and length in DSP words */
+ pos = sizeof(adsp2_id) / sizeof(u32);
+ len = (sizeof(*adsp2_alg) * n_algs) / sizeof(u32);
- adsp2_alg = wm_adsp_read_algs(dsp, n_algs, mem->base + pos, len);
+ adsp2_alg = wm_adsp_read_algs(dsp, n_algs, mem, pos, len);
if (IS_ERR(adsp2_alg))
return PTR_ERR(adsp2_alg);
--
2.11.0
More information about the Alsa-devel
mailing list