[alsa-devel] [PATCH v2 1/1] ASoC: stm32: sai: add iec958 controls support
Olivier Moysan
olivier.moysan at st.com
Mon Jun 11 17:13:59 CEST 2018
Add support of iec958 controls for STM32 SAI.
Signed-off-by: Olivier Moysan <olivier.moysan at st.com>
---
sound/soc/stm/Kconfig | 1 +
sound/soc/stm/stm32_sai_sub.c | 139 ++++++++++++++++++++++++++++++++++++++----
2 files changed, 128 insertions(+), 12 deletions(-)
diff --git a/sound/soc/stm/Kconfig b/sound/soc/stm/Kconfig
index 48f9ddd94016..9b2681397dba 100644
--- a/sound/soc/stm/Kconfig
+++ b/sound/soc/stm/Kconfig
@@ -6,6 +6,7 @@ config SND_SOC_STM32_SAI
depends on SND_SOC
select SND_SOC_GENERIC_DMAENGINE_PCM
select REGMAP_MMIO
+ select SND_PCM_IEC958
help
Say Y if you want to enable SAI for STM32
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index cfeb219e1d78..c4f15ea14197 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -96,7 +96,8 @@
* @slot_mask: rx or tx active slots mask. set at init or at runtime
* @data_size: PCM data width. corresponds to PCM substream width.
* @spdif_frm_cnt: S/PDIF playback frame counter
- * @spdif_status_bits: S/PDIF status bits
+ * @snd_aes_iec958: iec958 data
+ * @ctrl_lock: control lock
*/
struct stm32_sai_sub_data {
struct platform_device *pdev;
@@ -125,7 +126,8 @@ struct stm32_sai_sub_data {
int slot_mask;
int data_size;
unsigned int spdif_frm_cnt;
- unsigned char spdif_status_bits[SAI_IEC60958_STATUS_BYTES];
+ struct snd_aes_iec958 iec958;
+ struct mutex ctrl_lock; /* protect resources accessed by controls */
};
enum stm32_sai_fifo_th {
@@ -184,10 +186,6 @@ static bool stm32_sai_sub_writeable_reg(struct device *dev, unsigned int reg)
}
}
-static const unsigned char default_status_bits[SAI_IEC60958_STATUS_BYTES] = {
- 0, 0, 0, IEC958_AES3_CON_FS_48000,
-};
-
static const struct regmap_config stm32_sai_sub_regmap_config_f4 = {
.reg_bits = 32,
.reg_stride = 4,
@@ -210,6 +208,49 @@ static bool stm32_sai_sub_writeable_reg(struct device *dev, unsigned int reg)
.fast_io = true,
};
+static int snd_pcm_iec958_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+ uinfo->count = 1;
+
+ return 0;
+}
+
+static int snd_pcm_iec958_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *uctl)
+{
+ struct stm32_sai_sub_data *sai = snd_kcontrol_chip(kcontrol);
+
+ mutex_lock(&sai->ctrl_lock);
+ memcpy(uctl->value.iec958.status, sai->iec958.status, 4);
+ mutex_unlock(&sai->ctrl_lock);
+
+ return 0;
+}
+
+static int snd_pcm_iec958_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *uctl)
+{
+ struct stm32_sai_sub_data *sai = snd_kcontrol_chip(kcontrol);
+
+ mutex_lock(&sai->ctrl_lock);
+ memcpy(sai->iec958.status, uctl->value.iec958.status, 4);
+ mutex_unlock(&sai->ctrl_lock);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new iec958_ctls = {
+ .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE),
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+ .info = snd_pcm_iec958_info,
+ .get = snd_pcm_iec958_get,
+ .put = snd_pcm_iec958_put,
+};
+
static irqreturn_t stm32_sai_isr(int irq, void *devid)
{
struct stm32_sai_sub_data *sai = (struct stm32_sai_sub_data *)devid;
@@ -619,6 +660,59 @@ static void stm32_sai_set_frame(struct snd_soc_dai *cpu_dai)
}
}
+static void stm32_sai_init_iec958_status(struct stm32_sai_sub_data *sai)
+{
+ unsigned char *cs = sai->iec958.status;
+
+ cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+ cs[1] = IEC958_AES1_CON_GENERAL;
+ cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+ cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+}
+
+static void stm32_sai_set_iec958_status(struct stm32_sai_sub_data *sai,
+ struct snd_pcm_runtime *runtime)
+{
+ if (!runtime)
+ return;
+
+ /* Force the sample rate according to runtime rate */
+ mutex_lock(&sai->ctrl_lock);
+ switch (runtime->rate) {
+ case 22050:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_22050;
+ break;
+ case 44100:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_44100;
+ break;
+ case 88200:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_88200;
+ break;
+ case 176400:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_176400;
+ break;
+ case 24000:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_24000;
+ break;
+ case 48000:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_48000;
+ break;
+ case 96000:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_96000;
+ break;
+ case 192000:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_192000;
+ break;
+ case 32000:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_32000;
+ break;
+ default:
+ sai->iec958.status[3] = IEC958_AES3_CON_FS_NOTID;
+ break;
+ }
+ mutex_unlock(&sai->ctrl_lock);
+}
+
static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
struct snd_pcm_hw_params *params)
{
@@ -709,7 +803,11 @@ static int stm32_sai_hw_params(struct snd_pcm_substream *substream,
sai->data_size = params_width(params);
- if (!STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
+ if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
+ /* Rate not already set in runtime structure */
+ substream->runtime->rate = params_rate(params);
+ stm32_sai_set_iec958_status(sai, substream->runtime);
+ } else {
ret = stm32_sai_set_slots(cpu_dai);
if (ret < 0)
return ret;
@@ -789,6 +887,20 @@ static void stm32_sai_shutdown(struct snd_pcm_substream *substream,
sai->substream = NULL;
}
+static int stm32_sai_pcm_new(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev);
+
+ if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
+ dev_dbg(&sai->pdev->dev, "%s: register iec controls", __func__);
+ return snd_ctl_add(rtd->pcm->card,
+ snd_ctl_new1(&iec958_ctls, sai));
+ }
+
+ return 0;
+}
+
static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai)
{
struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev);
@@ -809,6 +921,10 @@ static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai)
else
snd_soc_dai_init_dma_data(cpu_dai, NULL, &sai->dma_params);
+ /* Next settings are not relevant for spdif mode */
+ if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+ return 0;
+
cr1_mask = SAI_XCR1_RX_TX;
if (STM_SAI_IS_CAPTURE(sai))
cr1 |= SAI_XCR1_RX_TX;
@@ -820,10 +936,6 @@ static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai)
sai->synco, sai->synci);
}
- if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
- memcpy(sai->spdif_status_bits, default_status_bits,
- sizeof(default_status_bits));
-
cr1_mask |= SAI_XCR1_SYNCEN_MASK;
cr1 |= SAI_XCR1_SYNCEN_SET(sai->sync);
@@ -861,7 +973,7 @@ static int stm32_sai_pcm_process_spdif(struct snd_pcm_substream *substream,
/* Set channel status bit */
byte = frm_cnt >> 3;
mask = 1 << (frm_cnt - (byte << 3));
- if (sai->spdif_status_bits[byte] & mask)
+ if (sai->iec958.status[byte] & mask)
*ptr |= 0x04000000;
ptr++;
@@ -888,6 +1000,7 @@ static int stm32_sai_pcm_process_spdif(struct snd_pcm_substream *substream,
static struct snd_soc_dai_driver stm32_sai_playback_dai[] = {
{
.probe = stm32_sai_dai_probe,
+ .pcm_new = stm32_sai_pcm_new,
.id = 1, /* avoid call to fmt_single_name() */
.playback = {
.channels_min = 1,
@@ -998,6 +1111,7 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev,
dev_err(&pdev->dev, "S/PDIF IEC60958 not supported\n");
return -EINVAL;
}
+ stm32_sai_init_iec958_status(sai);
sai->spdif = true;
sai->master = true;
}
@@ -1114,6 +1228,7 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
sai->id = (uintptr_t)of_id->data;
sai->pdev = pdev;
+ mutex_init(&sai->ctrl_lock);
platform_set_drvdata(pdev, sai);
sai->pdata = dev_get_drvdata(pdev->dev.parent);
--
1.9.1
More information about the Alsa-devel
mailing list