[alsa-devel] [PATCH 2/3] ASoC: stm32: sai: add iec958 controls support
Arnaud Pouliquen
arnaud.pouliquen at st.com
Tue Jun 5 17:52:55 CEST 2018
Hi Olivier,
On 03/13/2018 05:27 PM, Olivier MOYSAN wrote:
> Add support of iec958 controls for STM32 SAI.
>
> Signed-off-by: Olivier Moysan <olivier.moysan at st.com>
> ---
> sound/core/pcm_iec958.c | 1 +
> sound/soc/stm/Kconfig | 1 +
> sound/soc/stm/stm32_sai_sub.c | 101
> +++++++++++++++++++++++++++++++++++++-----
> 3 files changed, 91 insertions(+), 12 deletions(-)
>
> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
> index aba1f522e98a..c34735ac3c48 100644
> --- a/sound/core/pcm_iec958.c
> +++ b/sound/core/pcm_iec958.c
> @@ -19,6 +19,7 @@ static int snd_pcm_iec958_info(struct snd_kcontrol
> *kcontrol,
> {
> uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
> uinfo->count = 1;
> +
> return 0;
> }
Seems that this should be part of your patch 1/3
Regards,
Arnaud
>
> diff --git a/sound/soc/stm/Kconfig b/sound/soc/stm/Kconfig
> index 48f9ddd94016..9b2681397dba 100644
> --- a/sound/soc/stm/Kconfig
> +++ b/sound/soc/stm/Kconfig
> @@ -6,6 +6,7 @@ config SND_SOC_STM32_SAI
> depends on SND_SOC
> select SND_SOC_GENERIC_DMAENGINE_PCM
> select REGMAP_MMIO
> + select SND_PCM_IEC958
> help
> Say Y if you want to enable SAI for STM32
>
> diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
> index cfeb219e1d78..c2e487e133aa 100644
> --- a/sound/soc/stm/stm32_sai_sub.c
> +++ b/sound/soc/stm/stm32_sai_sub.c
> @@ -26,6 +26,7 @@
> #include <sound/asoundef.h>
> #include <sound/core.h>
> #include <sound/dmaengine_pcm.h>
> +#include <sound/pcm_iec958.h>
> #include <sound/pcm_params.h>
>
> #include "stm32_sai.h"
> @@ -96,7 +97,7 @@
> * @slot_mask: rx or tx active slots mask. set at init or at runtime
> * @data_size: PCM data width. corresponds to PCM substream width.
> * @spdif_frm_cnt: S/PDIF playback frame counter
> - * @spdif_status_bits: S/PDIF status bits
> + * @snd_aes_iec958: iec958 data
> */
> struct stm32_sai_sub_data {
> struct platform_device *pdev;
> @@ -125,7 +126,7 @@ struct stm32_sai_sub_data {
> int slot_mask;
> int data_size;
> unsigned int spdif_frm_cnt;
> - unsigned char spdif_status_bits[SAI_IEC60958_STATUS_BYTES];
> + struct snd_aes_iec958 iec958;
> };
>
> enum stm32_sai_fifo_th {
> @@ -184,10 +185,6 @@ static bool stm32_sai_sub_writeable_reg(struct
> device *dev, unsigned int reg)
> }
> }
>
> -static const unsigned char
> default_status_bits[SAI_IEC60958_STATUS_BYTES] = {
> - 0, 0, 0, IEC958_AES3_CON_FS_48000,
> -};
> -
> static const struct regmap_config stm32_sai_sub_regmap_config_f4 = {
> .reg_bits = 32,
> .reg_stride = 4,
> @@ -619,6 +616,59 @@ static void stm32_sai_set_frame(struct snd_soc_dai
> *cpu_dai)
> }
> }
>
> +static void stm32_sai_set_channel_status(struct stm32_sai_sub_data *sai,
> + struct snd_pcm_runtime *runtime)
> +{
> + if (!runtime)
> + return;
> +
> + /* Force the sample rate according to runtime rate */
> + switch (runtime->rate) {
> + case 22050:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_22050;
> + break;
> + case 44100:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_44100;
> + break;
> + case 88200:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_88200;
> + break;
> + case 176400:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_176400;
> + break;
> + case 24000:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_24000;
> + break;
> + case 48000:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_48000;
> + break;
> + case 96000:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_96000;
> + break;
> + case 192000:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_192000;
> + break;
> + case 32000:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_32000;
> + break;
> + default:
> + sai->iec958.status[3] = IEC958_AES3_CON_FS_NOTID;
> + break;
> + }
> +}
> +
> +static int stm32_sai_iec958_set(struct snd_pcm_iec958_params *iec_param)
> +{
> + struct stm32_sai_sub_data *sai = iec_param->private_data;
> +
> + if (!sai->substream)
> + return 0;
> +
> + stm32_sai_set_channel_status(sai, sai->substream->runtime);
> +
> + return 0;
> +}
> +
> static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
> struct snd_pcm_hw_params *params)
> {
> @@ -709,7 +759,11 @@ static int stm32_sai_hw_params(struct
> snd_pcm_substream *substream,
>
> sai->data_size = params_width(params);
>
> - if (!STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
> + if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
> + /* Rate not already set in runtime structure */
> + substream->runtime->rate = params_rate(params);
> + stm32_sai_set_channel_status(sai, substream->runtime);
> + } else {
> ret = stm32_sai_set_slots(cpu_dai);
> if (ret < 0)
> return ret;
> @@ -789,6 +843,28 @@ static void stm32_sai_shutdown(struct
> snd_pcm_substream *substream,
> sai->substream = NULL;
> }
>
> +static int stm32_sai_pcm_new(struct snd_soc_pcm_runtime *rtd,
> + struct snd_soc_dai *cpu_dai)
> +{
> + struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev);
> + struct snd_pcm_iec958_params *iec_param;
> +
> + if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
> + dev_dbg(&sai->pdev->dev, "%s: register iec controls",
> __func__);
> + iec_param = devm_kzalloc(&sai->pdev->dev,
> sizeof(*iec_param),
> + GFP_KERNEL);
> + iec_param->ctrl_set = stm32_sai_iec958_set;
> + iec_param->private_data = sai;
> + iec_param->cs = sai->iec958.status;
> + iec_param->cs_len = 5;
> + return snd_pcm_add_iec958_ctl(rtd->pcm, 0,
> + SNDRV_PCM_STREAM_PLAYBACK,
> + iec_param);
> + }
> +
> + return 0;
> +}
> +
> static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai)
> {
> struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev);
> @@ -809,6 +885,10 @@ static int stm32_sai_dai_probe(struct snd_soc_dai
> *cpu_dai)
> else
> snd_soc_dai_init_dma_data(cpu_dai, NULL, &sai->dma_params);
>
> + /* Next settings are not relevant for spdif mode */
> + if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
> + return 0;
> +
> cr1_mask = SAI_XCR1_RX_TX;
> if (STM_SAI_IS_CAPTURE(sai))
> cr1 |= SAI_XCR1_RX_TX;
> @@ -820,10 +900,6 @@ static int stm32_sai_dai_probe(struct snd_soc_dai
> *cpu_dai)
> sai->synco, sai->synci);
> }
>
> - if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
> - memcpy(sai->spdif_status_bits, default_status_bits,
> - sizeof(default_status_bits));
> -
> cr1_mask |= SAI_XCR1_SYNCEN_MASK;
> cr1 |= SAI_XCR1_SYNCEN_SET(sai->sync);
>
> @@ -861,7 +937,7 @@ static int stm32_sai_pcm_process_spdif(struct
> snd_pcm_substream *substream,
> /* Set channel status bit */
> byte = frm_cnt >> 3;
> mask = 1 << (frm_cnt - (byte << 3));
> - if (sai->spdif_status_bits[byte] & mask)
> + if (sai->iec958.status[byte] & mask)
> *ptr |= 0x04000000;
> ptr++;
>
> @@ -888,6 +964,7 @@ static int stm32_sai_pcm_process_spdif(struct
> snd_pcm_substream *substream,
> static struct snd_soc_dai_driver stm32_sai_playback_dai[] = {
> {
> .probe = stm32_sai_dai_probe,
> + .pcm_new = stm32_sai_pcm_new,
> .id = 1, /* avoid call to fmt_single_name() */
> .playback = {
> .channels_min = 1,
> --
> 1.9.1
>
More information about the Alsa-devel
mailing list