[alsa-devel] [PATCH v1 7/7] arm64: dts: rockchip: add PX30 eavluation board devicetree
cl at rock-chips.com
cl at rock-chips.com
Tue Jul 17 09:58:54 CEST 2018
From: Liang Chen <cl at rock-chips.com>
This patch add px30-evb.dts for PX30 evaluation board.
Tested on PX30 evb.
Signed-off-by: Liang Chen <cl at rock-chips.com>
---
Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/px30-evb.dts | 539 +++++++++++++++++++++
3 files changed, 544 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-evb.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 1c1d62d..e33b23a 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -158,6 +158,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
+- Rockchip PX30 evb:
+ Required root node properties:
+ - compatible = "rockchip,px30-evb", "rockchip,px30";
+
- Rockchip RK3368 evb:
Required root node properties:
- compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 48a83f8..19aa9c6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -14,3 +14,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
new file mode 100644
index 0000000..b481408
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -0,0 +1,539 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+ model = "Rockchip PX30 EVB";
+ compatible = "rockchip,px30-evb", "rockchip,px30";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ poll-interval = <100>;
+ keyup-threshold-microvolt = <1800000>;
+
+ esc-key {
+ linux,code = <KEY_ESC>;
+ label = "esc";
+ press-threshold-microvolt = <1310000>;
+ };
+
+ home-key {
+ linux,code = <KEY_HOME>;
+ label = "home";
+ press-threshold-microvolt = <624000>;
+ };
+
+ menu-key {
+ linux,code = <KEY_MENU>;
+ label = "menu";
+ press-threshold-microvolt = <987000>;
+ };
+
+ vol-down-key {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "volume down";
+ press-threshold-microvolt = <300000>;
+ };
+
+ vol-up-key {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "volume up";
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 25000 0>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,1500000n8";
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ /*clocks = <&rk809 1>;*/
+ /*clock-names = "ext_clock";*/
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&gmac {
+ phy-supply = <&vcc_phy>;
+ clock_in_out = "output";
+ snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic at 20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default", "pmic-sleep",
+ "pmic-power-off", "pmic-reset";
+ pinctrl-0 = <&pmic_int>;
+ pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
+ pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
+ pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ //fb-inner-reg-idxs = <2>;
+ /* 1: rst regs (default in codes), 0: rst the pmic */
+ pmic-reset-func = <1>;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ pwrkey {
+ status = "okay";
+ };
+
+ pinctrl_rk8xx: pinctrl_rk8xx {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk817_slppin_null: rk817_slppin_null {
+ pins = "gpio_slp";
+ function = "pin_fun0";
+ };
+
+ rk817_slppin_slp: rk817_slppin_slp {
+ pins = "gpio_slp";
+ function = "pin_fun1";
+ };
+
+ rk817_slppin_pwrdn: rk817_slppin_pwrdn {
+ pins = "gpio_slp";
+ function = "pin_fun2";
+ };
+
+ rk817_slppin_rst: rk817_slppin_rst {
+ pins = "gpio_slp";
+ function = "pin_fun3";
+ };
+ };
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_logic";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v0: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v0: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vcc_1v0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc1v8_soc: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcc1v8_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd1v0_soc: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-name = "vcc1v0_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v0_pmu: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-name = "vcc3v0_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-name = "vcc2v8_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcc1v8_dvp";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd1v5_dvp: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vdd1v5_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sys";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_lcd: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3_lcd";
+ };
+
+ vcc5v0_host: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc5v0_host";
+ };
+ };
+ };
+};
+
+&i2s1_2ch {
+ status = "okay";
+ #sound-dai-cells = <0>;
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc1v8_soc>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v0>;
+ vccio4-supply = <&vcc3v0_pmu>;
+ vccio5-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+
+ pmuio1-supply = <&vcc3v0_pmu>;
+ pmuio2-supply = <&vcc3v0_pmu>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc1v8_soc>;
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ /*cd-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; [> CD GPIO <]*/
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ non-removable;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--
1.9.1
More information about the Alsa-devel
mailing list