[alsa-devel] [PATCH 1/2] ASoC: AMD: Send correct channel for configuring DMA descriptors
Akshu Agrawal
akshu.agrawal at amd.com
Mon Jul 16 09:02:40 CEST 2018
Earlier, ch1 was used to define ACP-SYSMEM transfer and ch2 for
ACP-I2S transfer. With recent patches ch1 is used to define channel
order number 1 and ch2 as channel order number 2. Thus,
Playback:
ch1:SYSMEM->ACP
ch2:ACP->I2S
Capture:
ch1:I2S->ACP
ch1:ACP->SYSMEM
Signed-off-by: Akshu Agrawal <akshu.agrawal at amd.com>
---
sound/soc/amd/acp-pcm-dma.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 65c1033..eeb8677 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -322,17 +322,27 @@ static void config_acp_dma(void __iomem *acp_mmio,
struct audio_substream_data *rtd,
u32 asic_type)
{
+ u16 ch_acp_sysmem, ch_acp_i2s;
+
acp_pte_config(acp_mmio, rtd->pg, rtd->num_of_pages,
rtd->pte_offset);
+
+ if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ ch_acp_sysmem = rtd->ch1;
+ ch_acp_i2s = rtd->ch2;
+ } else {
+ ch_acp_i2s = rtd->ch1;
+ ch_acp_sysmem = rtd->ch2;
+ }
/* Configure System memory <-> ACP SRAM DMA descriptors */
set_acp_sysmem_dma_descriptors(acp_mmio, rtd->size,
rtd->direction, rtd->pte_offset,
- rtd->ch1, rtd->sram_bank,
+ ch_acp_sysmem, rtd->sram_bank,
rtd->dma_dscr_idx_1, asic_type);
/* Configure ACP SRAM <-> I2S DMA descriptors */
set_acp_to_i2s_dma_descriptors(acp_mmio, rtd->size,
rtd->direction, rtd->sram_bank,
- rtd->destination, rtd->ch2,
+ rtd->destination, ch_acp_i2s,
rtd->dma_dscr_idx_2, asic_type);
}
@@ -995,16 +1005,24 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct audio_substream_data *rtd = runtime->private_data;
+ u16 ch_acp_sysmem, ch_acp_i2s;
if (!rtd)
return -EINVAL;
+ if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ ch_acp_sysmem = rtd->ch1;
+ ch_acp_i2s = rtd->ch2;
+ } else {
+ ch_acp_i2s = rtd->ch1;
+ ch_acp_sysmem = rtd->ch2;
+ }
config_acp_dma_channel(rtd->acp_mmio,
- rtd->ch1,
+ ch_acp_sysmem,
rtd->dma_dscr_idx_1,
NUM_DSCRS_PER_CHANNEL, 0);
config_acp_dma_channel(rtd->acp_mmio,
- rtd->ch2,
+ ch_acp_i2s,
rtd->dma_dscr_idx_2,
NUM_DSCRS_PER_CHANNEL, 0);
return 0;
--
1.9.1
More information about the Alsa-devel
mailing list