[alsa-devel] [PATCH v2 044/186] ASoC: wm9090: replace codec to component
Kuninori Morimoto
kuninori.morimoto.gx at renesas.com
Mon Jan 29 04:10:09 CET 2018
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Now we can replace Codec to Component. Let's do it.
Note:
xxx_codec_xxx() -> xxx_component_xxx()
.idle_bias_off = 0 -> .idle_bias_on = 1
.ignore_pmdown_time = 0 -> .use_pmdown_time = 1
- -> .endianness = 1
- -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
sound/soc/codecs/wm9090.c | 109 ++++++++++++++++++++++------------------------
1 file changed, 53 insertions(+), 56 deletions(-)
diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c
index 5a13138..a9f1a03 100644
--- a/sound/soc/codecs/wm9090.c
+++ b/sound/soc/codecs/wm9090.c
@@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg)
}
}
-static void wait_for_dc_servo(struct snd_soc_codec *codec)
+static void wait_for_dc_servo(struct snd_soc_component *component)
{
unsigned int reg;
int count = 0;
- dev_dbg(codec->dev, "Waiting for DC servo...\n");
+ dev_dbg(component->dev, "Waiting for DC servo...\n");
do {
count++;
msleep(1);
- reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0);
- dev_dbg(codec->dev, "DC servo status: %x\n", reg);
+ reg = snd_soc_component_read32(component, WM9090_DC_SERVO_READBACK_0);
+ dev_dbg(component->dev, "DC servo status: %x\n", reg);
} while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
!= WM9090_DCS_CAL_COMPLETE_MASK)
- dev_err(codec->dev, "Timed out waiting for DC Servo\n");
+ dev_err(component->dev, "Timed out waiting for DC Servo\n");
}
static const DECLARE_TLV_DB_RANGE(in_tlv,
@@ -251,22 +251,22 @@ static const DECLARE_TLV_DB_RANGE(spkboost_tlv,
static int hp_ev(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0);
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ unsigned int reg = snd_soc_component_read32(component, WM9090_ANALOGUE_HP_0);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
- snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
+ snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, WM9090_CP_ENA);
msleep(5);
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
- snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
+ snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
/* Start the DC servo. We don't currently use the
* ability to save the state since we don't have full
@@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
* DC offsets; see the WM8904 driver for an example of
* doing so.
*/
- snd_soc_write(codec, WM9090_DC_SERVO_0,
+ snd_soc_component_write(component, WM9090_DC_SERVO_0,
WM9090_DCS_ENA_CHAN_0 |
WM9090_DCS_ENA_CHAN_1 |
WM9090_DCS_TRIG_STARTUP_1 |
WM9090_DCS_TRIG_STARTUP_0);
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(component);
reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
- snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
+ snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
break;
case SND_SOC_DAPM_PRE_PMD:
@@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
WM9090_HPOUT1R_DLY |
WM9090_HPOUT1R_OUTP);
- snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
+ snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
- snd_soc_write(codec, WM9090_DC_SERVO_0, 0);
+ snd_soc_component_write(component, WM9090_DC_SERVO_0, 0);
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
0);
- snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
+ snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
WM9090_CP_ENA, 0);
break;
}
@@ -419,10 +419,10 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
{ "IN2A PGA", NULL, "IN2-" },
};
-static int wm9090_add_controls(struct snd_soc_codec *codec)
+static int wm9090_add_controls(struct snd_soc_component *component)
{
- struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
- struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
+ struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
+ struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
int i;
snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
@@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
- snd_soc_add_codec_controls(codec, wm9090_controls,
+ snd_soc_add_component_controls(component, wm9090_controls,
ARRAY_SIZE(wm9090_controls));
if (wm9090->pdata.lin1_diff) {
@@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
} else {
snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
ARRAY_SIZE(audio_map_in1_se));
- snd_soc_add_codec_controls(codec, wm9090_in1_se_controls,
+ snd_soc_add_component_controls(component, wm9090_in1_se_controls,
ARRAY_SIZE(wm9090_in1_se_controls));
}
@@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
} else {
snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
ARRAY_SIZE(audio_map_in2_se));
- snd_soc_add_codec_controls(codec, wm9090_in2_se_controls,
+ snd_soc_add_component_controls(component, wm9090_in2_se_controls,
ARRAY_SIZE(wm9090_in2_se_controls));
}
if (wm9090->pdata.agc_ena) {
for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
- snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i,
+ snd_soc_component_write(component, WM9090_AGC_CONTROL_0 + i,
wm9090->pdata.agc[i]);
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
+ snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, WM9090_AGC_ENA);
} else {
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
+ snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
WM9090_AGC_ENA, 0);
}
@@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
* The machine driver should call this from their set_bias_level; if there
* isn't one then this can just be set as the set_bias_level function.
*/
-static int wm9090_set_bias_level(struct snd_soc_codec *codec,
+static int wm9090_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
- struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
+ struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
- snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA,
+ snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA,
WM9090_VMID_ENA);
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA |
WM9090_VMID_RES_MASK,
WM9090_BIAS_ENA |
@@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_STANDBY:
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
+ if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
/* Restore the register cache */
regcache_sync(wm9090->regmap);
}
@@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
* ground referenced outputs and class D speaker mean that
* latency is not an issue.
*/
- snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
+ snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
- snd_soc_update_bits(codec, WM9090_ANTIPOP2,
+ snd_soc_component_update_bits(component, WM9090_ANTIPOP2,
WM9090_VMID_ENA, 0);
break;
@@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
return 0;
}
-static int wm9090_probe(struct snd_soc_codec *codec)
+static int wm9090_probe(struct snd_soc_component *component)
{
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
- snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
+ snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_A_VOLUME,
WM9090_IN1_VU | WM9090_IN1A_ZC,
WM9090_IN1_VU | WM9090_IN1A_ZC);
- snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
+ snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_B_VOLUME,
WM9090_IN1_VU | WM9090_IN1B_ZC,
WM9090_IN1_VU | WM9090_IN1B_ZC);
- snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
+ snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_A_VOLUME,
WM9090_IN2_VU | WM9090_IN2A_ZC,
WM9090_IN2_VU | WM9090_IN2A_ZC);
- snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
+ snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_B_VOLUME,
WM9090_IN2_VU | WM9090_IN2B_ZC,
WM9090_IN2_VU | WM9090_IN2B_ZC);
- snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
+ snd_soc_component_update_bits(component, WM9090_SPEAKER_VOLUME_LEFT,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
- snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
+ snd_soc_component_update_bits(component, WM9090_LEFT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
- snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
+ snd_soc_component_update_bits(component, WM9090_RIGHT_OUTPUT_VOLUME,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
- snd_soc_update_bits(codec, WM9090_CLOCKING_1,
+ snd_soc_component_update_bits(component, WM9090_CLOCKING_1,
WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
- wm9090_add_controls(codec);
+ wm9090_add_controls(component);
return 0;
}
-static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = {
- .probe = wm9090_probe,
- .set_bias_level = wm9090_set_bias_level,
- .suspend_bias_off = true,
+static const struct snd_soc_component_driver soc_component_dev_wm9090 = {
+ .probe = wm9090_probe,
+ .set_bias_level = wm9090_set_bias_level,
+ .suspend_bias_off = 1,
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
};
static const struct regmap_config wm9090_regmap = {
@@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm9090);
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_wm9090, NULL, 0);
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm9090, NULL, 0);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
return ret;
@@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
return 0;
}
-static int wm9090_i2c_remove(struct i2c_client *i2c)
-{
- snd_soc_unregister_codec(&i2c->dev);
- return 0;
-}
-
static const struct i2c_device_id wm9090_id[] = {
{ "wm9090", 0 },
{ "wm9093", 0 },
@@ -635,7 +633,6 @@ static int wm9090_i2c_remove(struct i2c_client *i2c)
.name = "wm9090",
},
.probe = wm9090_i2c_probe,
- .remove = wm9090_i2c_remove,
.id_table = wm9090_id,
};
--
1.9.1
More information about the Alsa-devel
mailing list