[alsa-devel] [PATCH 163/187] ASoC: sgtl5000: replace codec to component
Kuninori Morimoto
kuninori.morimoto.gx at renesas.com
Fri Jan 12 02:54:49 CET 2018
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Now we can replace Codec to Component. Let's do it.
Note:
xxx_codec_xxx() -> xxx_component_xxx()
.idle_bias_off = 0 -> .idle_bias_on = 1
.ignore_pmdown_time = 0 -> .pmdown_time = 1
- -> .endianness = 1
- -> .non_legacy_dai_naming = 1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
sound/soc/codecs/sgtl5000.c | 173 +++++++++++++++++++++-----------------------
1 file changed, 84 insertions(+), 89 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index f2bb4fe..00ddc66 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -147,19 +147,19 @@ struct sgtl5000_priv {
static int mic_bias_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
/* change mic bias resistor */
- snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK,
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
break;
case SND_SOC_DAPM_PRE_PMD:
- snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK, 0);
break;
}
@@ -174,12 +174,12 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
static int power_vag_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
switch (event) {
case SND_SOC_DAPM_POST_PMU:
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
msleep(400);
break;
@@ -190,9 +190,9 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
* operational to prevent inadvertently starving the
* other one of them.
*/
- if ((snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER) &
+ if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
mask) != mask) {
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VAG_POWERUP, 0);
msleep(400);
}
@@ -318,12 +318,12 @@ static int dac_info_volsw(struct snd_kcontrol *kcontrol,
static int dac_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
int reg;
int l;
int r;
- reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
+ reg = snd_soc_component_read32(component, SGTL5000_CHIP_DAC_VOL);
/* get left channel volume */
l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
@@ -371,7 +371,7 @@ static int dac_get_volsw(struct snd_kcontrol *kcontrol,
static int dac_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
int reg;
int l;
int r;
@@ -391,7 +391,7 @@ static int dac_put_volsw(struct snd_kcontrol *kcontrol,
reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
- snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
+ snd_soc_component_write(component, SGTL5000_CHIP_DAC_VOL, reg);
return 0;
}
@@ -409,9 +409,9 @@ static int dac_put_volsw(struct snd_kcontrol *kcontrol,
static int avc_get_threshold(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
int db, i;
- u16 reg = snd_soc_read(codec, SGTL5000_DAP_AVC_THRESHOLD);
+ u16 reg = snd_soc_component_read32(component, SGTL5000_DAP_AVC_THRESHOLD);
/* register value 0 => -96dB */
if (!reg) {
@@ -442,7 +442,7 @@ static int avc_get_threshold(struct snd_kcontrol *kcontrol,
static int avc_put_threshold(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
int db;
u16 reg;
@@ -450,7 +450,7 @@ static int avc_put_threshold(struct snd_kcontrol *kcontrol,
if (db < 0 || db > 96)
return -EINVAL;
reg = avc_thr_db2reg[db];
- snd_soc_write(codec, SGTL5000_DAP_AVC_THRESHOLD, reg);
+ snd_soc_component_write(component, SGTL5000_DAP_AVC_THRESHOLD, reg);
return 0;
}
@@ -528,10 +528,10 @@ static const DECLARE_TLV_DB_RANGE(mic_gain_tlv,
/* mute the codec used by alsa core */
static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
- snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ADCDAC_CTRL,
adcdac_ctrl, mute ? adcdac_ctrl : 0);
return 0;
@@ -540,8 +540,8 @@ static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
/* set codec format */
static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
{
- struct snd_soc_codec *codec = codec_dai->codec;
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = codec_dai->component;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
u16 i2sctl = 0;
sgtl5000->master = 0;
@@ -599,7 +599,7 @@ static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
return -EINVAL;
}
- snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
+ snd_soc_component_write(component, SGTL5000_CHIP_I2S_CTRL, i2sctl);
return 0;
}
@@ -608,8 +608,8 @@ static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
- struct snd_soc_codec *codec = codec_dai->codec;
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = codec_dai->component;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
switch (clk_id) {
case SGTL5000_SYSCLK:
@@ -635,9 +635,9 @@ static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
* and above.
* 3. usage of sys_mclk is preferred over pll to save power.
*/
-static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
+static int sgtl5000_set_clock(struct snd_soc_component *component, int frame_rate)
{
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
int clk_ctl = 0;
int sys_fs; /* sample freq */
@@ -690,7 +690,7 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
break;
default:
- dev_err(codec->dev, "frame rate %d not supported\n",
+ dev_err(component->dev, "frame rate %d not supported\n",
frame_rate);
return -EINVAL;
}
@@ -719,9 +719,9 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
SGTL5000_MCLK_FREQ_SHIFT;
} else {
- dev_err(codec->dev,
+ dev_err(component->dev,
"PLL not supported in slave mode\n");
- dev_err(codec->dev, "%d ratio is not supported. "
+ dev_err(component->dev, "%d ratio is not supported. "
"SYS_MCLK needs to be 256, 384 or 512 * fs\n",
sgtl5000->sysclk / frame_rate);
return -EINVAL;
@@ -754,31 +754,31 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
- snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
+ snd_soc_component_write(component, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
if (div2)
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
SGTL5000_CHIP_CLK_TOP_CTRL,
SGTL5000_INPUT_FREQ_DIV2,
SGTL5000_INPUT_FREQ_DIV2);
else
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
SGTL5000_CHIP_CLK_TOP_CTRL,
SGTL5000_INPUT_FREQ_DIV2,
0);
/* power up pll */
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
/* if using pll, clk_ctrl must be set after pll power up */
- snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+ snd_soc_component_write(component, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
} else {
/* otherwise, clk_ctrl must be set before pll power down */
- snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+ snd_soc_component_write(component, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
/* power down pll */
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
0);
}
@@ -794,8 +794,8 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct snd_soc_codec *codec = dai->codec;
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = dai->component;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
int channels = params_channels(params);
int i2s_ctl = 0;
int stereo;
@@ -803,7 +803,7 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
/* sysclk should already set */
if (!sgtl5000->sysclk) {
- dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
+ dev_err(component->dev, "%s: set sysclk first!\n", __func__);
return -EFAULT;
}
@@ -813,11 +813,11 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
stereo = SGTL5000_ADC_STEREO;
/* set mono to save power */
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, stereo,
channels == 1 ? 0 : stereo);
/* set codec clock base on lrclk */
- ret = sgtl5000_set_clock(codec, params_rate(params));
+ ret = sgtl5000_set_clock(component, params_rate(params));
if (ret)
return ret;
@@ -851,7 +851,7 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
- snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_I2S_CTRL,
SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
i2s_ctl);
@@ -868,19 +868,19 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
* stop:
* on --> prepare --> standby
*/
-static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
+static int sgtl5000_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
case SND_SOC_BIAS_STANDBY:
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
SGTL5000_REFTOP_POWERUP,
SGTL5000_REFTOP_POWERUP);
break;
case SND_SOC_BIAS_OFF:
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
SGTL5000_REFTOP_POWERUP, 0);
break;
}
@@ -1020,7 +1020,7 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg)
* 1. vddd provided by external or not
* 2. vdda and vddio voltage value. > 3.1v or not
*/
-static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
+static int sgtl5000_set_power_regs(struct snd_soc_component *component)
{
int vddd;
int vdda;
@@ -1032,7 +1032,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
int vol_quot;
int lo_vol;
size_t i;
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
@@ -1045,14 +1045,14 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
vddd = vddd / 1000;
if (vdda <= 0 || vddio <= 0 || vddd < 0) {
- dev_err(codec->dev, "regulator voltage not set correctly\n");
+ dev_err(component->dev, "regulator voltage not set correctly\n");
return -EINVAL;
}
/* according to datasheet, maximum voltage of supplies */
if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
- dev_err(codec->dev,
+ dev_err(component->dev,
"exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
vdda, vddio, vddd);
@@ -1060,15 +1060,15 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
}
/* reset value */
- ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
+ ana_pwr = snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER);
ana_pwr |= SGTL5000_DAC_STEREO |
SGTL5000_ADC_STEREO |
SGTL5000_REFTOP_POWERUP;
- lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
+ lreg_ctrl = snd_soc_component_read32(component, SGTL5000_CHIP_LINREG_CTRL);
if (vddio < 3100 && vdda < 3100) {
/* enable internal oscillator used for charge pump */
- snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_CLK_TOP_CTRL,
SGTL5000_INT_OSC_EN,
SGTL5000_INT_OSC_EN);
/* Enable VDDC charge pump */
@@ -1081,9 +1081,9 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
SGTL5000_VDDC_MAN_ASSN_SHIFT;
}
- snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
+ snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
- snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+ snd_soc_component_write(component, SGTL5000_CHIP_ANA_POWER, ana_pwr);
/*
* set ADC/DAC VAG to vdda / 2,
@@ -1098,7 +1098,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
else
vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
- snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL,
SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
@@ -1112,7 +1112,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) /
SGTL5000_LINE_OUT_GND_STP;
- snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_LINE_OUT_CTRL,
SGTL5000_LINE_OUT_CURRENT_MASK |
SGTL5000_LINE_OUT_GND_MASK,
lo_vag << SGTL5000_LINE_OUT_GND_SHIFT |
@@ -1135,7 +1135,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
break;
}
- snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_VOL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_LINE_OUT_VOL,
SGTL5000_LINE_OUT_VOL_RIGHT_MASK |
SGTL5000_LINE_OUT_VOL_LEFT_MASK,
lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT |
@@ -1183,51 +1183,51 @@ static int sgtl5000_enable_regulators(struct i2c_client *client)
return ret;
}
-static int sgtl5000_probe(struct snd_soc_codec *codec)
+static int sgtl5000_probe(struct snd_soc_component *component)
{
int ret;
u16 reg;
- struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component);
/* power up sgtl5000 */
- ret = sgtl5000_set_power_regs(codec);
+ ret = sgtl5000_set_power_regs(component);
if (ret)
goto err;
/* enable small pop, introduce 400ms delay in turning off */
- snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL,
SGTL5000_SMALL_POP, 1);
/* disable short cut detector */
- snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
+ snd_soc_component_write(component, SGTL5000_CHIP_SHORT_CTRL, 0);
/*
* set i2s as default input of sound switch
* TODO: add sound switch to control and dapm widge.
*/
- snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
+ snd_soc_component_write(component, SGTL5000_CHIP_SSS_CTRL,
SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
- snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
+ snd_soc_component_write(component, SGTL5000_CHIP_DIG_POWER,
SGTL5000_ADC_EN | SGTL5000_DAC_EN);
/* enable dac volume ramp by default */
- snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ snd_soc_component_write(component, SGTL5000_CHIP_ADCDAC_CTRL,
SGTL5000_DAC_VOL_RAMP_EN |
SGTL5000_DAC_MUTE_RIGHT |
SGTL5000_DAC_MUTE_LEFT);
reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f);
- snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, reg);
+ snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
- snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
+ snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
SGTL5000_HP_ZCD_EN |
SGTL5000_ADC_ZCD_EN);
- snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK,
sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT);
- snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_VOLT_MASK,
sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);
/*
@@ -1235,7 +1235,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
* TODO:
* Enable DAP in kcontrol and dapm.
*/
- snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
+ snd_soc_component_write(component, SGTL5000_DAP_CTRL, 0);
return 0;
@@ -1243,24 +1243,20 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
return ret;
}
-static int sgtl5000_remove(struct snd_soc_codec *codec)
-{
- return 0;
-}
-
-static const struct snd_soc_codec_driver sgtl5000_driver = {
- .probe = sgtl5000_probe,
- .remove = sgtl5000_remove,
- .set_bias_level = sgtl5000_set_bias_level,
- .suspend_bias_off = true,
- .component_driver = {
- .controls = sgtl5000_snd_controls,
- .num_controls = ARRAY_SIZE(sgtl5000_snd_controls),
- .dapm_widgets = sgtl5000_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets),
- .dapm_routes = sgtl5000_dapm_routes,
- .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes),
- },
+static const struct snd_soc_component_driver sgtl5000_driver = {
+ .probe = sgtl5000_probe,
+ .set_bias_level = sgtl5000_set_bias_level,
+ .controls = sgtl5000_snd_controls,
+ .num_controls = ARRAY_SIZE(sgtl5000_snd_controls),
+ .dapm_widgets = sgtl5000_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets),
+ .dapm_routes = sgtl5000_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes),
+ .suspend_bias_off = 1,
+ .idle_bias_on = 1,
+ .pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
};
static const struct regmap_config sgtl5000_regmap = {
@@ -1456,7 +1452,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
/* Ensure sgtl5000 will start with sane register values */
sgtl5000_fill_defaults(client);
- ret = snd_soc_register_codec(&client->dev,
+ ret = devm_snd_soc_register_component(&client->dev,
&sgtl5000_driver, &sgtl5000_dai, 1);
if (ret)
goto disable_clk;
@@ -1477,7 +1473,6 @@ static int sgtl5000_i2c_remove(struct i2c_client *client)
{
struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
- snd_soc_unregister_codec(&client->dev);
clk_disable_unprepare(sgtl5000->mclk);
regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies);
regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies);
--
1.9.1
More information about the Alsa-devel
mailing list