[alsa-devel] [PATCH v2 9/9] ASoC: Intel: kconfig: add some comments for if symbols
Randy Dunlap
rdunlap at infradead.org
Wed Jan 3 20:25:37 CET 2018
On 01/03/2018 08:50 AM, Pierre-Louis Bossart wrote:
> From: Vinod Koul <vinod.koul at intel.com>
>
> Helps in finding if endings
That partial sentence is confusing. I couldn't decode it without
reading the entire patch. That shouldn't be necessary.
How about:
Help in finding (matching) if/endif pairs.
or
Help in finding matching "if" endings by commenting the "endif".
>
> Signed-off-by: Vinod Koul <vinod.koul at intel.com>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> ---
> sound/soc/intel/Kconfig | 10 ++++----
> sound/soc/intel/boards/Kconfig | 52 +++++++++++++++++++++---------------------
> 2 files changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
> index b75fa5f59b96..801b205662df 100644
> --- a/sound/soc/intel/Kconfig
> +++ b/sound/soc/intel/Kconfig
> @@ -47,7 +47,7 @@ config SND_SOC_INTEL_SST_FIRMWARE
> # when these platforms are enabled
>
> config SND_SOC_INTEL_HASWELL
> - tristate "Intel ASoC SST driver for Haswell/Broadwell"
> + tristate "Haswell/Broadwell Platforms"
> depends on SND_DMA_SGBUF
> depends on DMADEVICES && ACPI
> select SND_SOC_INTEL_SST
> @@ -60,7 +60,7 @@ config SND_SOC_INTEL_HASWELL
> typically used for Chromebooks. This is a recommended option.
>
> config SND_SOC_INTEL_BAYTRAIL
> - tristate "Intel ASoC SST driver for Baytrail (legacy)"
> + tristate "Baytrail (legacy) Platforms"
> depends on DMADEVICES && ACPI
> select SND_SOC_INTEL_SST
> select SND_SOC_INTEL_SST_ACPI
> @@ -73,7 +73,7 @@ config SND_SOC_INTEL_BAYTRAIL
> not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
>
> config SND_SST_ATOM_HIFI2_PLATFORM_PCI
> - tristate "Intel ASoC SST driver for PCI HiFi2 platforms (Medfield, Merrifield)"
> + tristate "PCI HiFi2 platforms (Medfield, Merrifield) platforms"
> depends on X86 && PCI
> select SND_SST_IPC_PCI
> select SND_SOC_COMPRESS
> @@ -87,7 +87,7 @@ config SND_SST_ATOM_HIFI2_PLATFORM_PCI
> is not in the standard firmware tree
>
> config SND_SST_ATOM_HIFI2_PLATFORM
> - tristate "Intel ASoC SST driver for ACPI HiFi2 platforms (Baytrail, Cherrytrail)"
> + tristate "ACPI HiFi2 platforms (Baytrail, Cherrytrail) Platforms"
> depends on X86 && ACPI
> select SND_SST_IPC_ACPI
> select IOSF_MBI
> @@ -99,7 +99,7 @@ config SND_SST_ATOM_HIFI2_PLATFORM
> recommended option
>
> config SND_SOC_INTEL_SKYLAKE
> - tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
> + tristate "SKL/BXT/KBL/GLK/CNL... Platforms"
> depends on PCI && ACPI
> select SND_HDA_EXT_CORE
> select SND_HDA_DSP_LOADER
> diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
> index 6a10df882a88..89a73e3d9d2d 100644
> --- a/sound/soc/intel/boards/Kconfig
> +++ b/sound/soc/intel/boards/Kconfig
> @@ -15,7 +15,7 @@ if SND_SOC_INTEL_MACH
> if SND_SST_ATOM_HIFI2_PLATFORM_PCI
>
> config SND_MFLD_MACHINE
> - tristate "SOC Machine Audio driver for Intel Medfield MID platform"
> + tristate "Intel Medfield MID"
> depends on INTEL_SCU_IPC
> select SND_SOC_SN95031
> help
> @@ -24,12 +24,12 @@ config SND_MFLD_MACHINE
> Say Y if you have such a device.
> If unsure select "N".
>
> -endif
> +endif ## SND_SST_ATOM_HIFI2_PLATFORM_PCI
>
> if SND_SOC_INTEL_HASWELL
>
> config SND_SOC_INTEL_HASWELL_MACH
> - tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
> + tristate "Haswell Lynxpoint"
> depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
> select SND_SOC_RT5640
> help
> @@ -39,7 +39,7 @@ config SND_SOC_INTEL_HASWELL_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BDW_RT5677_MACH
> - tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
> + tristate "Broadwell with RT5677 codec"
> depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM && GPIOLIB
> select SND_SOC_RT5677
> help
> @@ -49,7 +49,7 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BROADWELL_MACH
> - tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
> + tristate "Intel Broadwell Wildcatpoint"
> depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
> select SND_SOC_RT286
> help
> @@ -57,12 +57,12 @@ config SND_SOC_INTEL_BROADWELL_MACH
> Ultrabook platforms.
> Say Y or m if you have such a device. This is a recommended option.
> If unsure select "N".
> -endif
> +endif ## SND_SOC_INTEL_HASWELL
>
> if SND_SOC_INTEL_BAYTRAIL
>
> config SND_SOC_INTEL_BYT_MAX98090_MACH
> - tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
> + tristate "Baytrail with MAX98090 codec"
> depends on X86_INTEL_LPSS && I2C
> select SND_SOC_MAX98090
> help
> @@ -72,7 +72,7 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
> functionality.
>
> config SND_SOC_INTEL_BYT_RT5640_MACH
> - tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
> + tristate "Baytrail with RT5640 codec"
> depends on X86_INTEL_LPSS && I2C
> select SND_SOC_RT5640
> help
> @@ -80,12 +80,12 @@ config SND_SOC_INTEL_BYT_RT5640_MACH
> with the RT5640 audio codec. This driver is deprecated, use
> SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
>
> -endif
> +endif ## SND_SOC_INTEL_BAYTRAIL
>
> if SND_SST_ATOM_HIFI2_PLATFORM
>
> config SND_SOC_INTEL_BYTCR_RT5640_MACH
> - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec"
> + tristate "Baytrail and Baytrail-CR with RT5640 codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_ACPI
> select SND_SOC_RT5640
> @@ -96,7 +96,7 @@ config SND_SOC_INTEL_BYTCR_RT5640_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BYTCR_RT5651_MACH
> - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
> + tristate "Baytrail and Baytrail-CR with RT5651 codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_ACPI
> select SND_SOC_RT5651
> @@ -107,7 +107,7 @@ config SND_SOC_INTEL_BYTCR_RT5651_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
> - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
> + tristate "Cherrytrail & Braswell with RT5672 codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_ACPI
> select SND_SOC_RT5670
> @@ -118,7 +118,7 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
> - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec"
> + tristate "Cherrytrail & Braswell with RT5645/5650 codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_ACPI
> select SND_SOC_RT5645
> @@ -129,7 +129,7 @@ config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
> - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec"
> + tristate "Cherrytrail & Braswell with MAX98090 & TI codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_MAX98090
> select SND_SOC_TS3A227E
> @@ -140,7 +140,7 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
> - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
> + tristate "Baytrail & Cherrytrail with DA7212/7213 codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_ACPI
> select SND_SOC_DA7213
> @@ -151,7 +151,7 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
> - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
> + tristate "Baytrail & Cherrytrail with ES8316 codec"
> depends on X86_INTEL_LPSS && I2C && ACPI
> select SND_SOC_ES8316
> help
> @@ -161,7 +161,7 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
> - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
> + tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
> depends on X86_INTEL_LPSS && I2C && ACPI
> help
> This adds support for ASoC machine driver for the MinnowBoard Max or
> @@ -172,12 +172,12 @@ config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
>
> If unsure select "N".
>
> -endif
> +endif ## SND_SST_ATOM_HIFI2_PLATFORM
>
> if SND_SOC_INTEL_SKYLAKE
>
> config SND_SOC_INTEL_SKL_RT286_MACH
> - tristate "ASoC Audio driver for SKL with RT286 I2S mode"
> + tristate "SKL with RT286 I2S mode"
> depends on MFD_INTEL_LPSS && I2C && ACPI
> select SND_SOC_RT286
> select SND_SOC_DMIC
> @@ -189,7 +189,7 @@ config SND_SOC_INTEL_SKL_RT286_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
> - tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode"
> + tristate "SKL with NAU88L25 and SSM4567 in I2S Mode"
> depends on MFD_INTEL_LPSS && I2C && ACPI
> select SND_SOC_NAU8825
> select SND_SOC_SSM4567
> @@ -202,7 +202,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
> - tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode"
> + tristate "SKL with NAU88L25 and MAX98357A in I2S Mode"
> depends on MFD_INTEL_LPSS && I2C && ACPI
> select SND_SOC_NAU8825
> select SND_SOC_MAX98357A
> @@ -215,7 +215,7 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
> - tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode"
> + tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
> depends on MFD_INTEL_LPSS && I2C && ACPI
> select SND_SOC_DA7219
> select SND_SOC_MAX98357A
> @@ -229,7 +229,7 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_BXT_RT298_MACH
> - tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
> + tristate "Broxton with RT298 I2S mode"
> depends on MFD_INTEL_LPSS && I2C && ACPI
> select SND_SOC_RT298
> select SND_SOC_DMIC
> @@ -242,7 +242,7 @@ config SND_SOC_INTEL_BXT_RT298_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
> - tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode"
> + tristate "KBL with RT5663 and MAX98927 in I2S Mode"
> depends on MFD_INTEL_LPSS && I2C && ACPI
> select SND_SOC_RT5663
> select SND_SOC_MAX98927
> @@ -255,7 +255,7 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
> If unsure select "N".
>
> config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
> - tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
> + tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
> depends on MFD_INTEL_LPSS && I2C && SPI && ACPI
> select SND_SOC_RT5663
> select SND_SOC_RT5514
> @@ -267,6 +267,6 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
> create an alsa sound card for RT5663 + RT5514 + MAX98927.
> Say Y or m if you have such a device. This is a recommended option.
> If unsure select "N".
> -endif
> +endif ## SND_SOC_INTEL_SKYLAKE
>
> endif ## SND_SOC_INTEL_MACH
>
--
~Randy
More information about the Alsa-devel
mailing list