[alsa-devel] [PATCH v1 1/9] ASoC: Intel: Boards: Machine driver for Intel platforms
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Fri Feb 23 17:33:07 CET 2018
On 2/23/18 2:12 AM, Rakesh Ughreja wrote:
> Add machine driver for Intel platforms (SKL/KBL/BXT) with HDA and iDisp
> codecs. This patch adds support for only iDisp (HDMI/DP) codec. In the
> following patch support for HDA codec will be added.
>
> This should work for other Intel platforms as well e.g. GLK,CNL
> however this series is not tested on all the platforms.
>
> Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja at intel.com>
> ---
> sound/soc/intel/boards/Kconfig | 10 +++
> sound/soc/intel/boards/Makefile | 2 +
> sound/soc/intel/boards/skl_hda_dsp_common.c | 107 +++++++++++++++++++++++++
> sound/soc/intel/boards/skl_hda_dsp_common.h | 34 ++++++++
> sound/soc/intel/boards/skl_hda_dsp_generic.c | 114 +++++++++++++++++++++++++++
> sound/soc/intel/skylake/skl.h | 1 +
> 6 files changed, 268 insertions(+)
> create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.c
> create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.h
> create mode 100644 sound/soc/intel/boards/skl_hda_dsp_generic.c
>
> diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
> index eedc83b..3b20601 100644
> --- a/sound/soc/intel/boards/Kconfig
> +++ b/sound/soc/intel/boards/Kconfig
> @@ -268,6 +268,16 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH
> This adds support for ASoC Onboard Codec I2S machine driver. This will
> create an alsa sound card for DA7219 + MAX98357A I2S audio codec.
> Say Y if you have such a device.
> +
> +config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
> + tristate "SKL/KBL/BXT with HDA Codecs"
> + select SND_SOC_INTEL_SST
> + depends on SND_SOC_INTEL_SKYLAKE
There two lines are no longer necessary (done at the platform level for
SST and you already in an if SKYLAKE block
> + select SND_SOC_HDAC_HDMI
> + help
> + This adds support for ASoC Onboard Codec HDA machine driver. This will
> + create an alsa sound card for HDA Codecs.
does this handle idisp as well? If yes, does this option conflict with
the enablement of the other machine drivers which use the hdac_hdmi codec?
> + Say Y or m if you have such a device. This is a recommended option.
> If unsure select "N".
>
> endif ## SND_SOC_INTEL_SKYLAKE
> diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
> index 6fae506..5d65481 100644
> --- a/sound/soc/intel/boards/Makefile
> +++ b/sound/soc/intel/boards/Makefile
> @@ -18,6 +18,7 @@ snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
> snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o
> snd-soc-kbl_rt5663_rt5514_max98927-objs := kbl_rt5663_rt5514_max98927.o
> snd-soc-skl_rt286-objs := skl_rt286.o
> +snd-soc-skl_hda_dsp-objs := skl_hda_dsp_generic.o skl_hda_dsp_common.o
> snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
> snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o
>
> @@ -42,3 +43,4 @@ obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH) += snd-soc-kbl_rt566
> obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o
> obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o
> obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o
> +obj-$(CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH) += snd-soc-skl_hda_dsp.o
> diff --git a/sound/soc/intel/boards/skl_hda_dsp_common.c b/sound/soc/intel/boards/skl_hda_dsp_common.c
> new file mode 100644
> index 0000000..7066bed
> --- /dev/null
> +++ b/sound/soc/intel/boards/skl_hda_dsp_common.c
> @@ -0,0 +1,107 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright(c) 2015-17 Intel Corporation.
> +
> +/*
> + * Common functions used in different Intel machine drivers
> + */
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include "../../codecs/hdac_hdmi.h"
> +#include "../skylake/skl.h"
> +#include "skl_hda_dsp_common.h"
> +
> +#define NAME_SIZE 32
> +
> +int skl_hda_hdmi_add_pcm(struct snd_soc_card *card, int device)
> +{
> + char dai_name[NAME_SIZE];
> + struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card);
> + struct skl_hda_hdmi_pcm *pcm;
> + static int i = 1; /* hdmi codec dai name starts from index 1 */
> +
> + pcm = devm_kzalloc(card->dev, sizeof(*pcm), GFP_KERNEL);
> + if (!pcm)
> + return -ENOMEM;
> +
> + snprintf(dai_name, sizeof(dai_name), "intel-hdmi-hifi%d", i++);
> + pcm->codec_dai = snd_soc_card_get_codec_dai(card, dai_name);
> + if (!pcm->codec_dai)
> + return -EINVAL;
> +
> + pcm->device = device;
> + list_add_tail(&pcm->head, &ctx->hdmi_pcm_list);
> +
> + return 0;
> +}
> +
> +/* skl_hda_digital audio interface glue - connects codec <--> CPU */
> +struct snd_soc_dai_link skl_hda_be_dai_links[HDA_DSP_MAX_BE_DAI_LINKS] = {
> +
> + /* Back End DAI links */
> + {
> + .name = "iDisp1",
> + .id = 1,
> + .cpu_dai_name = "iDisp1 Pin",
> + .codec_name = "ehdaudio0D2",
> + .codec_dai_name = "intel-hdmi-hifi1",
> + .platform_name = "0000:00:1f.3",
what happens if you run on a device with a different ID, e.g. APL or GLK?
> + .dpcm_playback = 1,
> + .no_pcm = 1,
> + },
> + {
> + .name = "iDisp2",
> + .id = 2,
> + .cpu_dai_name = "iDisp2 Pin",
> + .codec_name = "ehdaudio0D2",
> + .codec_dai_name = "intel-hdmi-hifi2",
> + .platform_name = "0000:00:1f.3",
> + .dpcm_playback = 1,
> + .no_pcm = 1,
> + },
> + {
> + .name = "iDisp3",
> + .id = 3,
> + .cpu_dai_name = "iDisp3 Pin",
> + .codec_name = "ehdaudio0D2",
> + .codec_dai_name = "intel-hdmi-hifi3",
> + .platform_name = "0000:00:1f.3",
> + .dpcm_playback = 1,
> + .no_pcm = 1,
> + },
> +};
> +
> +int skl_hda_hdmi_jack_init(struct snd_soc_card *card)
> +{
> + struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card);
> + struct skl_hda_hdmi_pcm *pcm;
> + struct snd_soc_component *component = NULL;
> + int err;
> + char jack_name[NAME_SIZE];
> +
> + list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) {
> + component = pcm->codec_dai->component;
> + snprintf(jack_name, sizeof(jack_name),
> + "HDMI/DP, pcm=%d Jack", pcm->device);
> + err = snd_soc_card_jack_new(card, jack_name,
> + SND_JACK_AVOUT, &pcm->hdmi_jack,
> + NULL, 0);
> +
> + if (err)
> + return err;
> +
> + err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device,
> + &pcm->hdmi_jack);
> + if (err < 0)
> + return err;
> + }
> +
> + if (!component)
> + return -EINVAL;
> +
> + return hdac_hdmi_jack_port_init(component, &card->dapm);
> +}
> diff --git a/sound/soc/intel/boards/skl_hda_dsp_common.h b/sound/soc/intel/boards/skl_hda_dsp_common.h
> new file mode 100644
> index 0000000..adbf552
> --- /dev/null
> +++ b/sound/soc/intel/boards/skl_hda_dsp_common.h
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright(c) 2015-17 Intel Corporation.
> +
> +/*
> + * This file defines data structures used in Machine Driver for Intel
> + * platforms with HDA Codecs.
> + */
> +
> +#ifndef __SOUND_SOC_HDA_DSP_COMMON_H
> +#define __SOUND_SOC_HDA_DSP_COMMON_H
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +
> +#define HDA_DSP_MAX_BE_DAI_LINKS 3
> +
> +struct skl_hda_hdmi_pcm {
> + struct list_head head;
> + struct snd_soc_dai *codec_dai;
> + struct snd_soc_jack hdmi_jack;
> + int device;
> +};
> +
> +struct skl_hda_private {
> + struct list_head hdmi_pcm_list;
> + int pcm_count;
> +};
> +
> +extern struct snd_soc_dai_link skl_hda_be_dai_links[HDA_DSP_MAX_BE_DAI_LINKS];
> +int skl_hda_hdmi_jack_init(struct snd_soc_card *card);
> +int skl_hda_hdmi_add_pcm(struct snd_soc_card *card, int device);
> +
> +#endif /* __SOUND_SOC_HDA_DSP_COMMON_H */
> diff --git a/sound/soc/intel/boards/skl_hda_dsp_generic.c b/sound/soc/intel/boards/skl_hda_dsp_generic.c
> new file mode 100644
> index 0000000..9e925ba
> --- /dev/null
> +++ b/sound/soc/intel/boards/skl_hda_dsp_generic.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright(c) 2015-17 Intel Corporation.
> +
> +/*
> + * Machine Driver for SKL/KBL platforms with HDA Codecs
should this be SKL/KBL/APL/GLK....
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include "../../codecs/hdac_hdmi.h"
> +#include "../skylake/skl.h"
> +#include "skl_hda_dsp_common.h"
> +
> +static const char *platform_name = "0000:00:1f.3";
same comment as above, this is not constant across all devices
> +
> +static const struct snd_soc_dapm_route skl_hda_map[] = {
> +
> + { "hifi3", NULL, "iDisp3 Tx"},
> + { "iDisp3 Tx", NULL, "iDisp3_out"},
> + { "hifi2", NULL, "iDisp2 Tx"},
> + { "iDisp2 Tx", NULL, "iDisp2_out"},
> + { "hifi1", NULL, "iDisp1 Tx"},
> + { "iDisp1 Tx", NULL, "iDisp1_out"},
> +
> +};
> +
> +static int skl_hda_card_late_probe(struct snd_soc_card *card)
> +{
> + return skl_hda_hdmi_jack_init(card);
> +}
> +
> +static int
> +skl_hda_add_dai_link(struct snd_soc_card *card, struct snd_soc_dai_link *link)
> +{
> + struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card);
> + int ret = 0;
> +
> + dev_dbg(card->dev, "%s: dai link name - %s\n", __func__, link->name);
> + link->platform_name = platform_name;
> + link->nonatomic = 1;
> +
> + if (strstr(link->name, "HDMI"))
> + ret = skl_hda_hdmi_add_pcm(card, ctx->pcm_count);
> + ctx->pcm_count++;
> +
> + return ret;
> +}
> +
> +static struct snd_soc_card hda_soc_card = {
> + .name = "skl_hda_card",
> + .owner = THIS_MODULE,
> + .dai_link = skl_hda_be_dai_links,
> + .num_links = ARRAY_SIZE(skl_hda_be_dai_links),
> + .dapm_routes = skl_hda_map,
> + .num_dapm_routes = ARRAY_SIZE(skl_hda_map),
> + .add_dai_link = skl_hda_add_dai_link,
> + .fully_routed = true,
> + .late_probe = skl_hda_card_late_probe,
> +};
> +
> +static int skl_hda_audio_probe(struct platform_device *pdev)
> +{
> + struct skl_machine_pdata *pdata;
> + struct skl_hda_private *ctx;
> + int i;
> +
> + dev_dbg(&pdev->dev, "%s: machine driver probe got called\n", __func__);
> +
> + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC);
> + if (!ctx)
> + return -ENOMEM;
> +
> + INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
> + ctx->pcm_count = ARRAY_SIZE(skl_hda_be_dai_links);
> +
> + pdata = dev_get_drvdata(&pdev->dev);
> + if (pdata && pdata->platform) {
> + platform_name = pdata->platform;
> + for (i = 0; i < ctx->pcm_count; i++)
> + skl_hda_be_dai_links[i].platform_name = platform_name;
> + }
> +
> + hda_soc_card.dev = &pdev->dev;
> + snd_soc_card_set_drvdata(&hda_soc_card, ctx);
> +
> + return devm_snd_soc_register_card(&pdev->dev, &hda_soc_card);
> +}
> +
> +static const struct platform_device_id skl_hda_board_ids[] = {
> + { .name = "skl_hda_generic" },
> + { }
> +};
> +
> +static struct platform_driver skl_hda_audio = {
> + .probe = skl_hda_audio_probe,
> + .driver = {
> + .name = "skl_hda_generic",
> + .pm = &snd_soc_pm_ops,
> + },
> + .id_table = skl_hda_board_ids,
is this needed if you have a single id?
> +};
> +
> +module_platform_driver(skl_hda_audio)
> +
> +/* Module information */
> +MODULE_DESCRIPTION("SKL/KBL HDA Generic Machine driver");
I don't see how this handles HDAudio codecs in general, is this limited
to iDISP/HDMI support?
> +MODULE_AUTHOR("Rakesh Ughreja <rakesh.a.ughreja at intel.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:skl_hda_generic");
> diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h
> index 75adce8..8a63626 100644
> --- a/sound/soc/intel/skylake/skl.h
> +++ b/sound/soc/intel/skylake/skl.h
> @@ -113,6 +113,7 @@ struct skl_dma_params {
> struct skl_machine_pdata {
> u32 dmic_num;
> bool use_tplg_pcm; /* use dais and dai links from topology */
> + const char *platform;
> };
>
> struct skl_dsp_ops {
>
More information about the Alsa-devel
mailing list