[alsa-devel] [PATCH v3 15/25] ASoC: qcom: qdsp6: Add support to q6asm dai driver

[Rohit Kumar]

On 2/13/2018 10:28 PM, srinivas.kandagatla at linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>
> This patch adds support to q6asm dai driver which configures Q6ASM streams
> to pass pcm data.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
[..]
> diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
> new file mode 100644
> index 000000000000..7c5e94b2ced4
> --- /dev/null
> +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
> @@ -0,0 +1,621 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2011-2016, The Linux Foundation
> + * Copyright (c) 2017, Linaro Limited
> + */
> +
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/pcm.h>
> +#include <asm/dma.h>
[..]
> +static struct snd_pcm_hw_constraint_list constraints_sample_rates = {
> +	.count = ARRAY_SIZE(supported_sample_rates),
> +	.list = supported_sample_rates,
> +	.mask = 0,
> +};
> +
> +static void event_handler(uint32_t opcode, uint32_t token,
> +			  uint32_t *payload, void *priv)
> +{
> +	struct q6asm_dai_rtd *prtd = priv;
> +	struct snd_pcm_substream *substream = prtd->substream;
> +
> +	switch (opcode) {
> +	case ASM_CLIENT_EVENT_CMD_RUN_DONE:
Need to add support for V2 version of opcodes
> +		q6asm_write_async(prtd->audio_client,
> +				   prtd->pcm_count, 0, 0, NO_TIMESTAMP);
> +		break;
> +	case ASM_CLIENT_EVENT_CMD_EOS_DONE:
> +		prtd->state = Q6ASM_STREAM_STOPPED;
> +		break;
> +	case ASM_CLIENT_EVENT_DATA_WRITE_DONE: {
> +		prtd->pcm
[..]
> +
> +static int q6asm_dai_trigger(struct snd_pcm_substream *substream, int cmd)
> +{
> +	int ret = 0;
> +	struct snd_pcm_runtime *runtime = substream->runtime;
> +	struct q6asm_dai_rtd *prtd = runtime->private_data;
> +
> +	switch (cmd) {
> +	case SNDRV_PCM_TRIGGER_START:
> +		ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
> +		break;
below two cases can be combined with START if no change
> +	case SNDRV_PCM_TRIGGER_RESUME:
> +	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> +		ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
> +		break;
> +	case SNDRV_PCM_TRIGGER_STOP:
> +		prtd->state = Q6ASM_STREAM_STOPPED;
> +		ret = q6asm_cmd_nowait(prtd->audio_client, CMD_EOS);
> +		break;
> +	case SNDRV_PCM_TRIGGER_SUSPEND:
> +	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> +		ret = q6asm_cmd_nowait(prtd->audio_client, CMD_PAUSE);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int q6asm_dai_open(struct snd_pcm_substream *substream)
> +{
> +	struct snd_pcm_runtime *runtime = substream->runtime;
> +	struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
> +	struct snd_soc_dai *cpu_dai = soc_prtd->cpu_dai;
> +
> +	struct q6asm_dai_rtd *prtd;
> +	struct q6asm_dai_data *pdata;
> +	struct device *dev = soc_prtd->platform->dev;
> +	int ret = 0;
> +	int stream_id;
> +
> +	stream_id = cpu_dai->driver->id;
> +
> +	pdata = q6asm_get_dai_data(dev);
> +	if (!pdata) {
> +		pr_err("Platform data not found ..\n");
> +		return -EINVAL;
> +	}
> +
> +	prtd = kzalloc(sizeof(struct q6asm_dai_rtd), GFP_KERNEL);
> +	if (prtd == NULL)
> +		return -ENOMEM;
> +
> +	prtd->substream = substream;
> +	prtd->audio_client = q6asm_audio_client_alloc(dev,
> +				(q6asm_cb)event_handler, prtd, stream_id);
> +	if (!prtd->audio_client) {
> +		pr_info("%s: Could not allocate memory\n", __func__);
> +		kfree(prtd);
> +		return -ENOMEM;
> +	}
> +
> +//	prtd->audio_client->dev = dev;
cleanup this
> +
> +	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> +		runtime->hw = q6asm_dai_hardware_playback;
> +
> +	ret = snd_pcm_hw_constraint_list(runtime, 0,
> +				SNDRV_PCM_HW_PARAM_RATE,
> +				&constraints_sample_rates);
[..]
> +
> +static int q6asm_dai_pcm_new(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_pcm_substream *substream;
> +	struct of_phandle_args args;
> +	struct device_node *node;
> +	struct q6asm_dai_data *pdata;
> +	struct snd_pcm *pcm = rtd->pcm;
> +	struct device *dev;
> +	int size, ret;
> +
> +	dev = rtd->platform->dev->parent;
> +	node = dev->of_node;
> +	pdata = q6asm_get_dai_data(rtd->platform->dev);
> +
> +	ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
> +	if (ret < 0)
> +		pdata->sid = -1;
> +	else
> +		pdata->sid = args.args[0];
> +
> +
> +
iommus for sdm845 is 16bit value. we need to have sid_mask which is 0x1 
in sdm845. We need to mask sid with 0x1 to get proper sid.
pdata->sid &= 0x1;
> +	substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
> +	size = q6asm_dai_hardware_playback.buffer_bytes_max;
> +	ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev, size,
> +				  &substream->dma_buffer);
> +	if (ret)
> +		dev_err(dev, "Cannot allocate buffer(s)\n");
> +
> +	return ret;
> +}
> +