[alsa-devel] [PATCH v13 6/8] media: i2c: Add TDA1997x HDMI receiver driver
Tim Harvey
tharvey at gateworks.com
Thu Feb 15 18:55:34 CET 2018
Add support for the TDA1997x HDMI receivers.
Cc: Hans Verkuil <hverkuil at xs4all.nl>
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v13:
- fix coccinelle warnings
v12:
- fix coccinelle warnings
v11:
- return -ERANGE from tda1997x_detect_std (Hans)
- clean up tda1997x_g_input_status (Hans)
- show detected timings on resolution change if debug enabled
- fix unitialized ret var in tda1997x_query_dv_timings
- update log status to show detected timings
v10:
- removed unnecessary check for !timings in get/set/query dv timings (Hans)
- dropped pointless s_stream handler (Hans)
- remove need for detected_timings and always use set timings (Hans)
v9:
- remove redundant pad bounds check already in v4l2-subdev.c
- assign entity function (Hans)
- properly assign/check/free ctrl_handler (Hans)
- fixed typo 'Rull Range' -> 'Full Range'
- update csc after quant range change
v8:
- fix available formats for tda19971 bt656 bus width >12
- support full range of input modes based on timings_cap
- fix set_format (compliance)
- fixed get/set edid (compliance)
- add init_cfg to setup default pad config (compliance)
- added missing pad checks to get_dv_timings_cap/enum_dv_timings (compliance)
- fix alignment of if statement and whitespace in comment (Hans)
- move regs to tda1997x_regs.h to clean up (Hans)
- add define and sanity check for num of mbus_codes (Hans)
v7:
- fix interlaced mode
- support no AVI infoframe (ie DVI) (Hans)
- add support for multiple output formats (Hans)
v6:
- fix return on regulator enablei in tda1997x_set_power()
- replace copyright with SPDX tag
- fix colorspace handling
v5:
- uppercase string constants
- use v4l2_hdmi_rx_coloriemtry to fill format
- fix V4L2_CID_DV_RX_RGB_RANGE
- fix interlaced mode format
v4:
- move include/dt-bindings/media/tda1997x.h to bindings patch
- fix typos
- fix default quant range for VGA
- fix quant range handling and conv matrix
- add additional standards and capabilities to timings_cap
v3:
- use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros
- fixed missing break
- use only hdmi_infoframe_log for infoframe logging
- simplify tda1997x_s_stream error handling
- add delayed work proc to handle hotplug enable/disable
- fix set_edid (disable HPD before writing, enable after)
- remove enabling edid by default
- initialize timings
- take quant range into account in colorspace conversion
- remove vendor/product tracking (we provide this in log_status via infoframes)
- add v4l_controls
- add more detail to log_status
- calculate vhref generator timings
- timing detection fixes (rounding errors, hswidth errors)
- rename configure_input/configure_conv functions
v2:
- implement dv timings enum/cap
- remove deprecated g_mbus_config op
- fix dv_query_timings
- add EDID get/set handling
- remove max-pixel-rate support
- add audio codec DAI support
- change audio bindings
drivers/media/i2c/Kconfig | 9 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/tda1997x.c | 2820 +++++++++++++++++++++++++++++++++++++
drivers/media/i2c/tda1997x_regs.h | 641 +++++++++
include/media/i2c/tda1997x.h | 42 +
5 files changed, 3513 insertions(+)
create mode 100644 drivers/media/i2c/tda1997x.c
create mode 100644 drivers/media/i2c/tda1997x_regs.h
create mode 100644 include/media/i2c/tda1997x.h
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index cb5d7ff..3522641 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -56,6 +56,15 @@ config VIDEO_TDA9840
To compile this driver as a module, choose M here: the
module will be called tda9840.
+config VIDEO_TDA1997X
+ tristate "NXP TDA1997x HDMI receiver"
+ depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda1997x.
+
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
depends on I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 548a9ef..adfcae9 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
+obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o
diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c
new file mode 100644
index 0000000..b25c50a
--- /dev/null
+++ b/drivers/media/i2c/tda1997x.c
@@ -0,0 +1,2820 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Gateworks Corporation
+ */
+#include <linux/delay.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+#include <linux/v4l2-dv-timings.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/i2c/tda1997x.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <dt-bindings/media/tda1997x.h>
+
+#include "tda1997x_regs.h"
+
+#define TDA1997X_MBUS_CODES 5
+
+/* debug level */
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+/* Audio formats */
+static const char * const audtype_names[] = {
+ "PCM", /* PCM Samples */
+ "HBR", /* High Bit Rate Audio */
+ "OBA", /* One-Bit Audio */
+ "DST" /* Direct Stream Transfer */
+};
+
+/* Audio output port formats */
+enum audfmt_types {
+ AUDFMT_TYPE_DISABLED = 0,
+ AUDFMT_TYPE_I2S,
+ AUDFMT_TYPE_SPDIF,
+};
+static const char * const audfmt_names[] = {
+ "Disabled",
+ "I2S",
+ "SPDIF",
+};
+
+/* Video input formats */
+static const char * const hdmi_colorspace_names[] = {
+ "RGB", "YUV422", "YUV444", "YUV420", "", "", "", "",
+};
+static const char * const hdmi_colorimetry_names[] = {
+ "", "ITU601", "ITU709", "Extended",
+};
+static const char * const v4l2_quantization_names[] = {
+ "Default",
+ "Full Range (0-255)",
+ "Limited Range (16-235)",
+};
+
+/* Video output port formats */
+static const char * const vidfmt_names[] = {
+ "RGB444/YUV444", /* RGB/YUV444 16bit data bus, 8bpp */
+ "YUV422 semi-planar", /* YUV422 16bit data base, 8bpp */
+ "YUV422 CCIR656", /* BT656 (YUV 8bpp 2 clock per pixel) */
+ "Invalid",
+};
+
+/*
+ * Colorspace conversion matrices
+ */
+struct color_matrix_coefs {
+ const char *name;
+ /* Input offsets */
+ s16 offint1;
+ s16 offint2;
+ s16 offint3;
+ /* Coeficients */
+ s16 p11coef;
+ s16 p12coef;
+ s16 p13coef;
+ s16 p21coef;
+ s16 p22coef;
+ s16 p23coef;
+ s16 p31coef;
+ s16 p32coef;
+ s16 p33coef;
+ /* Output offsets */
+ s16 offout1;
+ s16 offout2;
+ s16 offout3;
+};
+
+enum {
+ ITU709_RGBFULL,
+ ITU601_RGBFULL,
+ RGBLIMITED_RGBFULL,
+ RGBLIMITED_ITU601,
+ RGBLIMITED_ITU709,
+ RGBFULL_ITU601,
+ RGBFULL_ITU709,
+};
+
+/* NB: 4096 is 1.0 using fixed point numbers */
+static const struct color_matrix_coefs conv_matrix[] = {
+ {
+ "YUV709 -> RGB full",
+ -256, -2048, -2048,
+ 4769, -2183, -873,
+ 4769, 7343, 0,
+ 4769, 0, 8652,
+ 0, 0, 0,
+ },
+ {
+ "YUV601 -> RGB full",
+ -256, -2048, -2048,
+ 4769, -3330, -1602,
+ 4769, 6538, 0,
+ 4769, 0, 8264,
+ 256, 256, 256,
+ },
+ {
+ "RGB limited -> RGB full",
+ -256, -256, -256,
+ 0, 4769, 0,
+ 0, 0, 4769,
+ 4769, 0, 0,
+ 0, 0, 0,
+ },
+ {
+ "RGB limited -> ITU601",
+ -256, -256, -256,
+ 2404, 1225, 467,
+ -1754, 2095, -341,
+ -1388, -707, 2095,
+ 256, 2048, 2048,
+ },
+ {
+ "RGB limited -> ITU709",
+ -256, -256, -256,
+ 2918, 867, 295,
+ -1894, 2087, -190,
+ -1607, -477, 2087,
+ 256, 2048, 2048,
+ },
+ {
+ "RGB full -> ITU601",
+ 0, 0, 0,
+ 2065, 1052, 401,
+ -1506, 1799, -293,
+ -1192, -607, 1799,
+ 256, 2048, 2048,
+ },
+ {
+ "RGB full -> ITU709",
+ 0, 0, 0,
+ 2506, 745, 253,
+ -1627, 1792, -163,
+ -1380, -410, 1792,
+ 256, 2048, 2048,
+ },
+};
+
+static const struct v4l2_dv_timings_cap tda1997x_dv_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+
+ V4L2_INIT_BT_TIMINGS(
+ 640, 1920, /* min/max width */
+ 350, 1200, /* min/max height */
+ 13000000, 165000000, /* min/max pixelclock */
+ /* standards */
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ /* capabilities */
+ V4L2_DV_BT_CAP_INTERLACED | V4L2_DV_BT_CAP_PROGRESSIVE |
+ V4L2_DV_BT_CAP_REDUCED_BLANKING |
+ V4L2_DV_BT_CAP_CUSTOM
+ )
+};
+
+/* regulator supplies */
+static const char * const tda1997x_supply_name[] = {
+ "DOVDD", /* Digital I/O supply */
+ "DVDD", /* Digital Core supply */
+ "AVDD", /* Analog supply */
+};
+
+#define TDA1997X_NUM_SUPPLIES ARRAY_SIZE(tda1997x_supply_name)
+
+enum tda1997x_type {
+ TDA19971,
+ TDA19973,
+};
+
+enum tda1997x_hdmi_pads {
+ TDA1997X_PAD_SOURCE,
+ TDA1997X_NUM_PADS,
+};
+
+struct tda1997x_chip_info {
+ enum tda1997x_type type;
+ const char *name;
+};
+
+struct tda1997x_state {
+ const struct tda1997x_chip_info *info;
+ struct tda1997x_platform_data pdata;
+ struct i2c_client *client;
+ struct i2c_client *client_cec;
+ struct v4l2_subdev sd;
+ struct regulator_bulk_data supplies[TDA1997X_NUM_SUPPLIES];
+ struct media_pad pads[TDA1997X_NUM_PADS];
+ struct mutex lock;
+ struct mutex page_lock;
+ char page;
+
+ /* detected info from chip */
+ int chip_revision;
+ char port_30bit;
+ char output_2p5;
+ char tmdsb_clk;
+ char tmdsb_soc;
+
+ /* status info */
+ char hdmi_status;
+ char mptrw_in_progress;
+ char activity_status;
+ char input_detect[2];
+
+ /* video */
+ struct hdmi_avi_infoframe avi_infoframe;
+ struct v4l2_hdmi_colorimetry colorimetry;
+ u32 rgb_quantization_range;
+ struct v4l2_dv_timings timings;
+ int fps;
+ const struct color_matrix_coefs *conv;
+ u32 mbus_codes[TDA1997X_MBUS_CODES]; /* available modes */
+ u32 mbus_code; /* current mode */
+ u8 vid_fmt;
+
+ /* controls */
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *detect_tx_5v_ctrl;
+ struct v4l2_ctrl *rgb_quantization_range_ctrl;
+
+ /* audio */
+ u8 audio_ch_alloc;
+ int audio_samplerate;
+ int audio_channels;
+ int audio_samplesize;
+ int audio_type;
+ struct mutex audio_lock;
+ struct snd_pcm_substream *audio_stream;
+
+ /* EDID */
+ struct {
+ u8 edid[256];
+ u32 present;
+ unsigned int blocks;
+ } edid;
+ struct delayed_work delayed_work_enable_hpd;
+};
+
+static const struct v4l2_event tda1997x_ev_fmt = {
+ .type = V4L2_EVENT_SOURCE_CHANGE,
+ .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+};
+
+static const struct tda1997x_chip_info tda1997x_chip_info[] = {
+ [TDA19971] = {
+ .type = TDA19971,
+ .name = "tda19971",
+ },
+ [TDA19973] = {
+ .type = TDA19973,
+ .name = "tda19973",
+ },
+};
+
+static inline struct tda1997x_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct tda1997x_state, sd);
+}
+
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct tda1997x_state, hdl)->sd;
+}
+
+static int tda1997x_cec_read(struct v4l2_subdev *sd, u8 reg)
+{
+ struct tda1997x_state *state = to_state(sd);
+ int val;
+
+ val = i2c_smbus_read_byte_data(state->client_cec, reg);
+ if (val < 0) {
+ v4l_err(state->client, "read reg error: reg=%2x\n", reg);
+ val = -1;
+ }
+
+ return val;
+}
+
+static int tda1997x_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+ struct tda1997x_state *state = to_state(sd);
+ int ret = 0;
+
+ ret = i2c_smbus_write_byte_data(state->client_cec, reg, val);
+ if (ret < 0) {
+ v4l_err(state->client, "write reg error:reg=%2x,val=%2x\n",
+ reg, val);
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * I2C transfer
+ */
+
+static int tda1997x_setpage(struct v4l2_subdev *sd, u8 page)
+{
+ struct tda1997x_state *state = to_state(sd);
+ int ret;
+
+ if (state->page != page) {
+ ret = i2c_smbus_write_byte_data(state->client,
+ REG_CURPAGE_00H, page);
+ if (ret < 0) {
+ v4l_err(state->client,
+ "write reg error:reg=%2x,val=%2x\n",
+ REG_CURPAGE_00H, page);
+ return ret;
+ }
+ state->page = page;
+ }
+ return 0;
+}
+
+static inline int io_read(struct v4l2_subdev *sd, u16 reg)
+{
+ struct tda1997x_state *state = to_state(sd);
+ int val;
+
+ mutex_lock(&state->page_lock);
+ if (tda1997x_setpage(sd, reg >> 8)) {
+ val = -1;
+ goto out;
+ }
+
+ val = i2c_smbus_read_byte_data(state->client, reg&0xff);
+ if (val < 0) {
+ v4l_err(state->client, "read reg error: reg=%2x\n", reg & 0xff);
+ val = -1;
+ goto out;
+ }
+
+out:
+ mutex_unlock(&state->page_lock);
+ return val;
+}
+
+static inline long io_read16(struct v4l2_subdev *sd, u16 reg)
+{
+ int val;
+ long lval = 0;
+
+ val = io_read(sd, reg);
+ if (val < 0)
+ return val;
+ lval |= (val << 8);
+ val = io_read(sd, reg + 1);
+ if (val < 0)
+ return val;
+ lval |= val;
+
+ return lval;
+}
+
+static inline long io_read24(struct v4l2_subdev *sd, u16 reg)
+{
+ int val;
+ long lval = 0;
+
+ val = io_read(sd, reg);
+ if (val < 0)
+ return val;
+ lval |= (val << 16);
+ val = io_read(sd, reg + 1);
+ if (val < 0)
+ return val;
+ lval |= (val << 8);
+ val = io_read(sd, reg + 2);
+ if (val < 0)
+ return val;
+ lval |= val;
+
+ return lval;
+}
+
+static unsigned int io_readn(struct v4l2_subdev *sd, u16 reg, u8 len, u8 *data)
+{
+ int i;
+ int sz = 0;
+ int val;
+
+ for (i = 0; i < len; i++) {
+ val = io_read(sd, reg + i);
+ if (val < 0)
+ break;
+ data[i] = val;
+ sz++;
+ }
+
+ return sz;
+}
+
+static int io_write(struct v4l2_subdev *sd, u16 reg, u8 val)
+{
+ struct tda1997x_state *state = to_state(sd);
+ s32 ret = 0;
+
+ mutex_lock(&state->page_lock);
+ if (tda1997x_setpage(sd, reg >> 8)) {
+ ret = -1;
+ goto out;
+ }
+
+ ret = i2c_smbus_write_byte_data(state->client, reg & 0xff, val);
+ if (ret < 0) {
+ v4l_err(state->client, "write reg error:reg=%2x,val=%2x\n",
+ reg&0xff, val);
+ ret = -1;
+ goto out;
+ }
+
+out:
+ mutex_unlock(&state->page_lock);
+ return ret;
+}
+
+static int io_write16(struct v4l2_subdev *sd, u16 reg, u16 val)
+{
+ int ret;
+
+ ret = io_write(sd, reg, (val >> 8) & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = io_write(sd, reg + 1, val & 0xff);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int io_write24(struct v4l2_subdev *sd, u16 reg, u32 val)
+{
+ int ret;
+
+ ret = io_write(sd, reg, (val >> 16) & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = io_write(sd, reg + 1, (val >> 8) & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = io_write(sd, reg + 2, val & 0xff);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Hotplug
+ */
+
+enum hpd_mode {
+ HPD_LOW_BP, /* HPD low and pulse of at least 100ms */
+ HPD_LOW_OTHER, /* HPD low and pulse of at least 100ms */
+ HPD_HIGH_BP, /* HIGH */
+ HPD_HIGH_OTHER,
+ HPD_PULSE, /* HPD low pulse */
+};
+
+/* manual HPD (Hot Plug Detect) control */
+static int tda1997x_manual_hpd(struct v4l2_subdev *sd, enum hpd_mode mode)
+{
+ u8 hpd_auto, hpd_pwr, hpd_man;
+
+ hpd_auto = io_read(sd, REG_HPD_AUTO_CTRL);
+ hpd_pwr = io_read(sd, REG_HPD_POWER);
+ hpd_man = io_read(sd, REG_HPD_MAN_CTRL);
+
+ /* mask out unused bits */
+ hpd_man &= (HPD_MAN_CTRL_HPD_PULSE |
+ HPD_MAN_CTRL_5VEN |
+ HPD_MAN_CTRL_HPD_B |
+ HPD_MAN_CTRL_HPD_A);
+
+ switch (mode) {
+ /* HPD low and pulse of at least 100ms */
+ case HPD_LOW_BP:
+ /* hpd_bp=0 */
+ hpd_pwr &= ~HPD_POWER_BP_MASK;
+ /* disable HPD_A and HPD_B */
+ hpd_man &= ~(HPD_MAN_CTRL_HPD_A | HPD_MAN_CTRL_HPD_B);
+ io_write(sd, REG_HPD_POWER, hpd_pwr);
+ io_write(sd, REG_HPD_MAN_CTRL, hpd_man);
+ break;
+ /* HPD high */
+ case HPD_HIGH_BP:
+ /* hpd_bp=1 */
+ hpd_pwr &= ~HPD_POWER_BP_MASK;
+ hpd_pwr |= 1 << HPD_POWER_BP_SHIFT;
+ io_write(sd, REG_HPD_POWER, hpd_pwr);
+ break;
+ /* HPD low and pulse of at least 100ms */
+ case HPD_LOW_OTHER:
+ /* disable HPD_A and HPD_B */
+ hpd_man &= ~(HPD_MAN_CTRL_HPD_A | HPD_MAN_CTRL_HPD_B);
+ /* hp_other=0 */
+ hpd_auto &= ~HPD_AUTO_HP_OTHER;
+ io_write(sd, REG_HPD_AUTO_CTRL, hpd_auto);
+ io_write(sd, REG_HPD_MAN_CTRL, hpd_man);
+ break;
+ /* HPD high */
+ case HPD_HIGH_OTHER:
+ hpd_auto |= HPD_AUTO_HP_OTHER;
+ io_write(sd, REG_HPD_AUTO_CTRL, hpd_auto);
+ break;
+ /* HPD low pulse */
+ case HPD_PULSE:
+ /* disable HPD_A and HPD_B */
+ hpd_man &= ~(HPD_MAN_CTRL_HPD_A | HPD_MAN_CTRL_HPD_B);
+ io_write(sd, REG_HPD_MAN_CTRL, hpd_man);
+ break;
+ }
+
+ return 0;
+}
+
+static void tda1997x_delayed_work_enable_hpd(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct tda1997x_state *state = container_of(dwork,
+ struct tda1997x_state,
+ delayed_work_enable_hpd);
+ struct v4l2_subdev *sd = &state->sd;
+
+ v4l2_dbg(2, debug, sd, "%s:\n", __func__);
+
+ /* Set HPD high */
+ tda1997x_manual_hpd(sd, HPD_HIGH_OTHER);
+ tda1997x_manual_hpd(sd, HPD_HIGH_BP);
+
+ state->edid.present = 1;
+}
+
+static void tda1997x_disable_edid(struct v4l2_subdev *sd)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l2_dbg(1, debug, sd, "%s\n", __func__);
+ cancel_delayed_work_sync(&state->delayed_work_enable_hpd);
+
+ /* Set HPD low */
+ tda1997x_manual_hpd(sd, HPD_LOW_BP);
+}
+
+static void tda1997x_enable_edid(struct v4l2_subdev *sd)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l2_dbg(1, debug, sd, "%s\n", __func__);
+
+ /* Enable hotplug after 100ms */
+ schedule_delayed_work(&state->delayed_work_enable_hpd, HZ / 10);
+}
+
+/* -----------------------------------------------------------------------------
+ * Signal Control
+ */
+
+/*
+ * configure vid_fmt based on mbus_code
+ */
+static int
+tda1997x_setup_format(struct tda1997x_state *state, u32 code)
+{
+ v4l_dbg(1, debug, state->client, "%s code=0x%x\n", __func__, code);
+ switch (code) {
+ case MEDIA_BUS_FMT_RGB121212_1X36:
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ case MEDIA_BUS_FMT_YUV12_1X36:
+ case MEDIA_BUS_FMT_YUV8_1X24:
+ state->vid_fmt = OF_FMT_444;
+ break;
+ case MEDIA_BUS_FMT_UYVY12_1X24:
+ case MEDIA_BUS_FMT_UYVY10_1X20:
+ case MEDIA_BUS_FMT_UYVY8_1X16:
+ state->vid_fmt = OF_FMT_422_SMPT;
+ break;
+ case MEDIA_BUS_FMT_UYVY12_2X12:
+ case MEDIA_BUS_FMT_UYVY10_2X10:
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ state->vid_fmt = OF_FMT_422_CCIR;
+ break;
+ default:
+ v4l_err(state->client, "incompatible format (0x%x)\n", code);
+ return -EINVAL;
+ }
+ v4l_dbg(1, debug, state->client, "%s code=0x%x fmt=%s\n", __func__,
+ code, vidfmt_names[state->vid_fmt]);
+ state->mbus_code = code;
+
+ return 0;
+}
+
+/*
+ * The color conversion matrix will convert between the colorimetry of the
+ * HDMI input to the desired output format RGB|YUV. RGB output is to be
+ * full-range and YUV is to be limited range.
+ *
+ * RGB full-range uses values from 0 to 255 which is recommended on a monitor
+ * and RGB Limited uses values from 16 to 236 (16=black, 235=white) which is
+ * typically recommended on a TV.
+ */
+static void
+tda1997x_configure_csc(struct v4l2_subdev *sd)
+{
+ struct tda1997x_state *state = to_state(sd);
+ struct hdmi_avi_infoframe *avi = &state->avi_infoframe;
+ struct v4l2_hdmi_colorimetry *c = &state->colorimetry;
+ /* Blanking code values depend on output colorspace (RGB or YUV) */
+ struct blanking_codes {
+ s16 code_gy;
+ s16 code_bu;
+ s16 code_rv;
+ };
+ static const struct blanking_codes rgb_blanking = { 64, 64, 64 };
+ static const struct blanking_codes yuv_blanking = { 64, 512, 512 };
+ const struct blanking_codes *blanking_codes = NULL;
+ u8 reg;
+
+ v4l_dbg(1, debug, state->client, "input:%s quant:%s output:%s\n",
+ hdmi_colorspace_names[avi->colorspace],
+ v4l2_quantization_names[c->quantization],
+ vidfmt_names[state->vid_fmt]);
+ state->conv = NULL;
+ switch (state->vid_fmt) {
+ /* RGB output */
+ case OF_FMT_444:
+ blanking_codes = &rgb_blanking;
+ if (c->colorspace == V4L2_COLORSPACE_SRGB) {
+ if (c->quantization == V4L2_QUANTIZATION_LIM_RANGE)
+ state->conv = &conv_matrix[RGBLIMITED_RGBFULL];
+ } else {
+ if (c->colorspace == V4L2_COLORSPACE_REC709)
+ state->conv = &conv_matrix[ITU709_RGBFULL];
+ else if (c->colorspace == V4L2_COLORSPACE_SMPTE170M)
+ state->conv = &conv_matrix[ITU601_RGBFULL];
+ }
+ break;
+
+ /* YUV output */
+ case OF_FMT_422_SMPT: /* semi-planar */
+ case OF_FMT_422_CCIR: /* CCIR656 */
+ blanking_codes = &yuv_blanking;
+ if ((c->colorspace == V4L2_COLORSPACE_SRGB) &&
+ (c->quantization == V4L2_QUANTIZATION_FULL_RANGE)) {
+ if (state->timings.bt.height <= 576)
+ state->conv = &conv_matrix[RGBFULL_ITU601];
+ else
+ state->conv = &conv_matrix[RGBFULL_ITU709];
+ } else if ((c->colorspace == V4L2_COLORSPACE_SRGB) &&
+ (c->quantization == V4L2_QUANTIZATION_LIM_RANGE)) {
+ if (state->timings.bt.height <= 576)
+ state->conv = &conv_matrix[RGBLIMITED_ITU601];
+ else
+ state->conv = &conv_matrix[RGBLIMITED_ITU709];
+ }
+ break;
+ }
+
+ if (state->conv) {
+ v4l_dbg(1, debug, state->client, "%s\n",
+ state->conv->name);
+ /* enable matrix conversion */
+ reg = io_read(sd, REG_VDP_CTRL);
+ reg &= ~VDP_CTRL_MATRIX_BP;
+ io_write(sd, REG_VDP_CTRL, reg);
+ /* offset inputs */
+ io_write16(sd, REG_VDP_MATRIX + 0, state->conv->offint1);
+ io_write16(sd, REG_VDP_MATRIX + 2, state->conv->offint2);
+ io_write16(sd, REG_VDP_MATRIX + 4, state->conv->offint3);
+ /* coefficients */
+ io_write16(sd, REG_VDP_MATRIX + 6, state->conv->p11coef);
+ io_write16(sd, REG_VDP_MATRIX + 8, state->conv->p12coef);
+ io_write16(sd, REG_VDP_MATRIX + 10, state->conv->p13coef);
+ io_write16(sd, REG_VDP_MATRIX + 12, state->conv->p21coef);
+ io_write16(sd, REG_VDP_MATRIX + 14, state->conv->p22coef);
+ io_write16(sd, REG_VDP_MATRIX + 16, state->conv->p23coef);
+ io_write16(sd, REG_VDP_MATRIX + 18, state->conv->p31coef);
+ io_write16(sd, REG_VDP_MATRIX + 20, state->conv->p32coef);
+ io_write16(sd, REG_VDP_MATRIX + 22, state->conv->p33coef);
+ /* offset outputs */
+ io_write16(sd, REG_VDP_MATRIX + 24, state->conv->offout1);
+ io_write16(sd, REG_VDP_MATRIX + 26, state->conv->offout2);
+ io_write16(sd, REG_VDP_MATRIX + 28, state->conv->offout3);
+ } else {
+ /* disable matrix conversion */
+ reg = io_read(sd, REG_VDP_CTRL);
+ reg |= VDP_CTRL_MATRIX_BP;
+ io_write(sd, REG_VDP_CTRL, reg);
+ }
+
+ /* SetBlankingCodes */
+ if (blanking_codes) {
+ io_write16(sd, REG_BLK_GY, blanking_codes->code_gy);
+ io_write16(sd, REG_BLK_BU, blanking_codes->code_bu);
+ io_write16(sd, REG_BLK_RV, blanking_codes->code_rv);
+ }
+}
+
+/* Configure frame detection window and VHREF timing generator */
+static void
+tda1997x_configure_vhref(struct v4l2_subdev *sd)
+{
+ struct tda1997x_state *state = to_state(sd);
+ const struct v4l2_bt_timings *bt = &state->timings.bt;
+ int width, lines;
+ u16 href_start, href_end;
+ u16 vref_f1_start, vref_f2_start;
+ u8 vref_f1_width, vref_f2_width;
+ u8 field_polarity;
+ u16 fieldref_f1_start, fieldref_f2_start;
+ u8 reg;
+
+ href_start = bt->hbackporch + bt->hsync + 1;
+ href_end = href_start + bt->width;
+ vref_f1_start = bt->height + bt->vbackporch + bt->vsync +
+ bt->il_vbackporch + bt->il_vsync +
+ bt->il_vfrontporch;
+ vref_f1_width = bt->vbackporch + bt->vsync + bt->vfrontporch;
+ vref_f2_start = 0;
+ vref_f2_width = 0;
+ fieldref_f1_start = 0;
+ fieldref_f2_start = 0;
+ if (bt->interlaced) {
+ vref_f2_start = (bt->height / 2) +
+ (bt->il_vbackporch + bt->il_vsync - 1);
+ vref_f2_width = bt->il_vbackporch + bt->il_vsync +
+ bt->il_vfrontporch;
+ fieldref_f2_start = vref_f2_start + bt->il_vfrontporch +
+ fieldref_f1_start;
+ }
+ field_polarity = 0;
+
+ width = V4L2_DV_BT_FRAME_WIDTH(bt);
+ lines = V4L2_DV_BT_FRAME_HEIGHT(bt);
+
+ /*
+ * Configure Frame Detection Window:
+ * horiz area where the VHREF module consider a VSYNC a new frame
+ */
+ io_write16(sd, REG_FDW_S, 0x2ef); /* start position */
+ io_write16(sd, REG_FDW_E, 0x141); /* end position */
+
+ /* Set Pixel And Line Counters */
+ if (state->chip_revision == 0)
+ io_write16(sd, REG_PXCNT_PR, 4);
+ else
+ io_write16(sd, REG_PXCNT_PR, 1);
+ io_write16(sd, REG_PXCNT_NPIX, width & MASK_VHREF);
+ io_write16(sd, REG_LCNT_PR, 1);
+ io_write16(sd, REG_LCNT_NLIN, lines & MASK_VHREF);
+
+ /*
+ * Configure the VHRef timing generator responsible for rebuilding all
+ * horiz and vert synch and ref signals from its input allowing auto
+ * detection algorithms and forcing predefined modes (480i & 576i)
+ */
+ reg = VHREF_STD_DET_OFF << VHREF_STD_DET_SHIFT;
+ io_write(sd, REG_VHREF_CTRL, reg);
+
+ /*
+ * Configure the VHRef timing values. In case the VHREF generator has
+ * been configured in manual mode, this will allow to manually set all
+ * horiz and vert ref values (non-active pixel areas) of the generator
+ * and allows setting the frame reference params.
+ */
+ /* horizontal reference start/end */
+ io_write16(sd, REG_HREF_S, href_start & MASK_VHREF);
+ io_write16(sd, REG_HREF_E, href_end & MASK_VHREF);
+ /* vertical reference f1 start/end */
+ io_write16(sd, REG_VREF_F1_S, vref_f1_start & MASK_VHREF);
+ io_write(sd, REG_VREF_F1_WIDTH, vref_f1_width);
+ /* vertical reference f2 start/end */
+ io_write16(sd, REG_VREF_F2_S, vref_f2_start & MASK_VHREF);
+ io_write(sd, REG_VREF_F2_WIDTH, vref_f2_width);
+
+ /* F1/F2 FREF, field polarity */
+ reg = fieldref_f1_start & MASK_VHREF;
+ reg |= field_polarity << 8;
+ io_write16(sd, REG_FREF_F1_S, reg);
+ reg = fieldref_f2_start & MASK_VHREF;
+ io_write16(sd, REG_FREF_F2_S, reg);
+}
+
+/* Configure Video Output port signals */
+static int
+tda1997x_configure_vidout(struct tda1997x_state *state)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ struct tda1997x_platform_data *pdata = &state->pdata;
+ u8 prefilter;
+ u8 reg;
+
+ /* Configure pixel clock generator: delay, polarity, rate */
+ reg = (state->vid_fmt == OF_FMT_422_CCIR) ?
+ PCLK_SEL_X2 : PCLK_SEL_X1;
+ reg |= pdata->vidout_delay_pclk << PCLK_DELAY_SHIFT;
+ reg |= pdata->vidout_inv_pclk << PCLK_INV_SHIFT;
+ io_write(sd, REG_PCLK, reg);
+
+ /* Configure pre-filter */
+ prefilter = 0; /* filters off */
+ /* YUV422 mode requires conversion */
+ if ((state->vid_fmt == OF_FMT_422_SMPT) ||
+ (state->vid_fmt == OF_FMT_422_CCIR)) {
+ /* 2/7 taps for Rv and Bu */
+ prefilter = FILTERS_CTRL_2_7TAP << FILTERS_CTRL_BU_SHIFT |
+ FILTERS_CTRL_2_7TAP << FILTERS_CTRL_RV_SHIFT;
+ }
+ io_write(sd, REG_FILTERS_CTRL, prefilter);
+
+ /* Configure video port */
+ reg = state->vid_fmt & OF_FMT_MASK;
+ if (state->vid_fmt == OF_FMT_422_CCIR)
+ reg |= (OF_BLK | OF_TRC);
+ reg |= OF_VP_ENABLE;
+ io_write(sd, REG_OF, reg);
+
+ /* Configure formatter and conversions */
+ reg = io_read(sd, REG_VDP_CTRL);
+ /* pre-filter is needed unless (REG_FILTERS_CTRL == 0) */
+ if (!prefilter)
+ reg |= VDP_CTRL_PREFILTER_BP;
+ else
+ reg &= ~VDP_CTRL_PREFILTER_BP;
+ /* formatter is needed for YUV422 and for trc/blc codes */
+ if (state->vid_fmt == OF_FMT_444)
+ reg |= VDP_CTRL_FORMATTER_BP;
+ /* formatter and compdel needed for timing/blanking codes */
+ else
+ reg &= ~(VDP_CTRL_FORMATTER_BP | VDP_CTRL_COMPDEL_BP);
+ /* activate compdel for small sync delays */
+ if ((pdata->vidout_delay_vs < 4) || (pdata->vidout_delay_hs < 4))
+ reg &= ~VDP_CTRL_COMPDEL_BP;
+ io_write(sd, REG_VDP_CTRL, reg);
+
+ /* Configure DE output signal: delay, polarity, and source */
+ reg = pdata->vidout_delay_de << DE_FREF_DELAY_SHIFT |
+ pdata->vidout_inv_de << DE_FREF_INV_SHIFT |
+ pdata->vidout_sel_de << DE_FREF_SEL_SHIFT;
+ io_write(sd, REG_DE_FREF, reg);
+
+ /* Configure HS/HREF output signal: delay, polarity, and source */
+ if (state->vid_fmt != OF_FMT_422_CCIR) {
+ reg = pdata->vidout_delay_hs << HS_HREF_DELAY_SHIFT |
+ pdata->vidout_inv_hs << HS_HREF_INV_SHIFT |
+ pdata->vidout_sel_hs << HS_HREF_SEL_SHIFT;
+ } else
+ reg = HS_HREF_SEL_NONE << HS_HREF_SEL_SHIFT;
+ io_write(sd, REG_HS_HREF, reg);
+
+ /* Configure VS/VREF output signal: delay, polarity, and source */
+ if (state->vid_fmt != OF_FMT_422_CCIR) {
+ reg = pdata->vidout_delay_vs << VS_VREF_DELAY_SHIFT |
+ pdata->vidout_inv_vs << VS_VREF_INV_SHIFT |
+ pdata->vidout_sel_vs << VS_VREF_SEL_SHIFT;
+ } else
+ reg = VS_VREF_SEL_NONE << VS_VREF_SEL_SHIFT;
+ io_write(sd, REG_VS_VREF, reg);
+
+ return 0;
+}
+
+/* Configure Audio output port signals */
+static int
+tda1997x_configure_audout(struct v4l2_subdev *sd, u8 channel_assignment)
+{
+ struct tda1997x_state *state = to_state(sd);
+ struct tda1997x_platform_data *pdata = &state->pdata;
+ bool sp_used_by_fifo = 1;
+ u8 reg;
+
+ if (!pdata->audout_format)
+ return 0;
+
+ /* channel assignment (CEA-861-D Table 20) */
+ io_write(sd, REG_AUDIO_PATH, channel_assignment);
+
+ /* Audio output configuration */
+ reg = 0;
+ switch (pdata->audout_format) {
+ case AUDFMT_TYPE_I2S:
+ reg |= AUDCFG_BUS_I2S << AUDCFG_BUS_SHIFT;
+ break;
+ case AUDFMT_TYPE_SPDIF:
+ reg |= AUDCFG_BUS_SPDIF << AUDCFG_BUS_SHIFT;
+ break;
+ }
+ switch (state->audio_type) {
+ case AUDCFG_TYPE_PCM:
+ reg |= AUDCFG_TYPE_PCM << AUDCFG_TYPE_SHIFT;
+ break;
+ case AUDCFG_TYPE_OBA:
+ reg |= AUDCFG_TYPE_OBA << AUDCFG_TYPE_SHIFT;
+ break;
+ case AUDCFG_TYPE_DST:
+ reg |= AUDCFG_TYPE_DST << AUDCFG_TYPE_SHIFT;
+ sp_used_by_fifo = 0;
+ break;
+ case AUDCFG_TYPE_HBR:
+ reg |= AUDCFG_TYPE_HBR << AUDCFG_TYPE_SHIFT;
+ if (pdata->audout_layout == 1) {
+ /* demuxed via AP0:AP3 */
+ reg |= AUDCFG_HBR_DEMUX << AUDCFG_HBR_SHIFT;
+ if (pdata->audout_format == AUDFMT_TYPE_SPDIF)
+ sp_used_by_fifo = 0;
+ } else {
+ /* straight via AP0 */
+ reg |= AUDCFG_HBR_STRAIGHT << AUDCFG_HBR_SHIFT;
+ }
+ break;
+ }
+ if (pdata->audout_width == 32)
+ reg |= AUDCFG_I2SW_32 << AUDCFG_I2SW_SHIFT;
+ else
+ reg |= AUDCFG_I2SW_16 << AUDCFG_I2SW_SHIFT;
+
+ /* automatic hardware mute */
+ if (pdata->audio_auto_mute)
+ reg |= AUDCFG_AUTO_MUTE_EN;
+ /* clock polarity */
+ if (pdata->audout_invert_clk)
+ reg |= AUDCFG_CLK_INVERT;
+ io_write(sd, REG_AUDCFG, reg);
+
+ /* audio layout */
+ reg = (pdata->audout_layout) ? AUDIO_LAYOUT_LAYOUT1 : 0;
+ if (!pdata->audout_layoutauto)
+ reg |= AUDIO_LAYOUT_MANUAL;
+ if (sp_used_by_fifo)
+ reg |= AUDIO_LAYOUT_SP_FLAG;
+ io_write(sd, REG_AUDIO_LAYOUT, reg);
+
+ /* FIFO Latency value */
+ io_write(sd, REG_FIFO_LATENCY_VAL, 0x80);
+
+ /* Audio output port config */
+ if (sp_used_by_fifo) {
+ reg = AUDIO_OUT_ENABLE_AP0;
+ if (channel_assignment >= 0x01)
+ reg |= AUDIO_OUT_ENABLE_AP1;
+ if (channel_assignment >= 0x04)
+ reg |= AUDIO_OUT_ENABLE_AP2;
+ if (channel_assignment >= 0x0c)
+ reg |= AUDIO_OUT_ENABLE_AP3;
+ /* specific cases where AP1 is not used */
+ if ((channel_assignment == 0x04)
+ || (channel_assignment == 0x08)
+ || (channel_assignment == 0x0c)
+ || (channel_assignment == 0x10)
+ || (channel_assignment == 0x14)
+ || (channel_assignment == 0x18)
+ || (channel_assignment == 0x1c))
+ reg &= ~AUDIO_OUT_ENABLE_AP1;
+ /* specific cases where AP2 is not used */
+ if ((channel_assignment >= 0x14)
+ && (channel_assignment <= 0x17))
+ reg &= ~AUDIO_OUT_ENABLE_AP2;
+ } else {
+ reg = AUDIO_OUT_ENABLE_AP3 |
+ AUDIO_OUT_ENABLE_AP2 |
+ AUDIO_OUT_ENABLE_AP1 |
+ AUDIO_OUT_ENABLE_AP0;
+ }
+ if (pdata->audout_format == AUDFMT_TYPE_I2S)
+ reg |= (AUDIO_OUT_ENABLE_ACLK | AUDIO_OUT_ENABLE_WS);
+ io_write(sd, REG_AUDIO_OUT_ENABLE, reg);
+
+ /* reset test mode to normal audio freq auto selection */
+ io_write(sd, REG_TEST_MODE, 0x00);
+
+ return 0;
+}
+
+/* Soft Reset of specific hdmi info */
+static int
+tda1997x_hdmi_info_reset(struct v4l2_subdev *sd, u8 info_rst, bool reset_sus)
+{
+ u8 reg;
+
+ /* reset infoframe engine packets */
+ reg = io_read(sd, REG_HDMI_INFO_RST);
+ io_write(sd, REG_HDMI_INFO_RST, info_rst);
+
+ /* if infoframe engine has been reset clear INT_FLG_MODE */
+ if (reg & RESET_IF) {
+ reg = io_read(sd, REG_INT_FLG_CLR_MODE);
+ io_write(sd, REG_INT_FLG_CLR_MODE, reg);
+ }
+
+ /* Disable REFTIM to restart start-up-sequencer (SUS) */
+ reg = io_read(sd, REG_RATE_CTRL);
+ reg &= ~RATE_REFTIM_ENABLE;
+ if (!reset_sus)
+ reg |= RATE_REFTIM_ENABLE;
+ reg = io_write(sd, REG_RATE_CTRL, reg);
+
+ return 0;
+}
+
+static void
+tda1997x_power_mode(struct tda1997x_state *state, bool enable)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 reg;
+
+ if (enable) {
+ /* Automatic control of TMDS */
+ io_write(sd, REG_PON_OVR_EN, PON_DIS);
+ /* Enable current bias unit */
+ io_write(sd, REG_CFG1, PON_EN);
+ /* Enable deep color PLL */
+ io_write(sd, REG_DEEP_PLL7_BYP, PON_DIS);
+ /* Output buffers active */
+ reg = io_read(sd, REG_OF);
+ reg &= ~OF_VP_ENABLE;
+ io_write(sd, REG_OF, reg);
+ } else {
+ /* Power down EDID mode sequence */
+ /* Output buffers in HiZ */
+ reg = io_read(sd, REG_OF);
+ reg |= OF_VP_ENABLE;
+ io_write(sd, REG_OF, reg);
+ /* Disable deep color PLL */
+ io_write(sd, REG_DEEP_PLL7_BYP, PON_EN);
+ /* Disable current bias unit */
+ io_write(sd, REG_CFG1, PON_DIS);
+ /* Manual control of TMDS */
+ io_write(sd, REG_PON_OVR_EN, PON_EN);
+ }
+}
+
+static bool
+tda1997x_detect_tx_5v(struct v4l2_subdev *sd)
+{
+ u8 reg = io_read(sd, REG_DETECT_5V);
+
+ return ((reg & DETECT_5V_SEL) ? 1 : 0);
+}
+
+static bool
+tda1997x_detect_tx_hpd(struct v4l2_subdev *sd)
+{
+ u8 reg = io_read(sd, REG_DETECT_5V);
+
+ return ((reg & DETECT_HPD) ? 1 : 0);
+}
+
+static int
+tda1997x_detect_std(struct tda1997x_state *state,
+ struct v4l2_dv_timings *timings)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u32 vper;
+ u16 hper;
+ u16 hsper;
+ int i;
+
+ /*
+ * Read the FMT registers
+ * REG_V_PER: Period of a frame (or two fields) in MCLK(27MHz) cycles
+ * REG_H_PER: Period of a line in MCLK(27MHz) cycles
+ * REG_HS_WIDTH: Period of horiz sync pulse in MCLK(27MHz) cycles
+ */
+ vper = io_read24(sd, REG_V_PER) & MASK_VPER;
+ hper = io_read16(sd, REG_H_PER) & MASK_HPER;
+ hsper = io_read16(sd, REG_HS_WIDTH) & MASK_HSWIDTH;
+ v4l2_dbg(1, debug, sd, "Signal Timings: %u/%u/%u\n", vper, hper, hsper);
+ if (!vper || !hper || !hsper)
+ return -ENOLINK;
+
+ for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
+ const struct v4l2_bt_timings *bt;
+ u32 lines, width, _hper, _hsper;
+ u32 vmin, vmax, hmin, hmax, hsmin, hsmax;
+ bool vmatch, hmatch, hsmatch;
+
+ bt = &v4l2_dv_timings_presets[i].bt;
+ width = V4L2_DV_BT_FRAME_WIDTH(bt);
+ lines = V4L2_DV_BT_FRAME_HEIGHT(bt);
+ _hper = (u32)bt->pixelclock / width;
+ if (bt->interlaced)
+ lines /= 2;
+ /* vper +/- 0.7% */
+ vmin = ((27000000 / 1000) * 993) / _hper * lines;
+ vmax = ((27000000 / 1000) * 1007) / _hper * lines;
+ /* hper +/- 1.0% */
+ hmin = ((27000000 / 100) * 99) / _hper;
+ hmax = ((27000000 / 100) * 101) / _hper;
+ /* hsper +/- 2 (take care to avoid 32bit overflow) */
+ _hsper = 27000 * bt->hsync / ((u32)bt->pixelclock/1000);
+ hsmin = _hsper - 2;
+ hsmax = _hsper + 2;
+
+ /* vmatch matches the framerate */
+ vmatch = ((vper <= vmax) && (vper >= vmin)) ? 1 : 0;
+ /* hmatch matches the width */
+ hmatch = ((hper <= hmax) && (hper >= hmin)) ? 1 : 0;
+ /* hsmatch matches the hswidth */
+ hsmatch = ((hsper <= hsmax) && (hsper >= hsmin)) ? 1 : 0;
+ if (hmatch && vmatch && hsmatch) {
+ v4l2_print_dv_timings(sd->name, "Detected format: ",
+ &v4l2_dv_timings_presets[i],
+ false);
+ if (timings)
+ *timings = v4l2_dv_timings_presets[i];
+ return 0;
+ }
+ }
+
+ v4l_err(state->client, "no resolution match for timings: %d/%d/%d\n",
+ vper, hper, hsper);
+ return -ERANGE;
+}
+
+/* some sort of errata workaround for chip revision 0 (N1) */
+static void tda1997x_reset_n1(struct tda1997x_state *state)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 reg;
+
+ /* clear HDMI mode flag in BCAPS */
+ io_write(sd, REG_CLK_CFG, CLK_CFG_SEL_ACLK_EN | CLK_CFG_SEL_ACLK);
+ io_write(sd, REG_PON_OVR_EN, PON_EN);
+ io_write(sd, REG_PON_CBIAS, PON_EN);
+ io_write(sd, REG_PON_PLL, PON_EN);
+
+ reg = io_read(sd, REG_MODE_REC_CFG1);
+ reg &= ~0x06;
+ reg |= 0x02;
+ io_write(sd, REG_MODE_REC_CFG1, reg);
+ io_write(sd, REG_CLK_CFG, CLK_CFG_DIS);
+ io_write(sd, REG_PON_OVR_EN, PON_DIS);
+ reg = io_read(sd, REG_MODE_REC_CFG1);
+ reg &= ~0x06;
+ io_write(sd, REG_MODE_REC_CFG1, reg);
+}
+
+/*
+ * Activity detection must only be notified when stable_clk_x AND active_x
+ * bits are set to 1. If only stable_clk_x bit is set to 1 but not
+ * active_x, it means that the TMDS clock is not in the defined range
+ * and activity detection must not be notified.
+ */
+static u8
+tda1997x_read_activity_status_regs(struct v4l2_subdev *sd)
+{
+ u8 reg, status = 0;
+
+ /* Read CLK_A_STATUS register */
+ reg = io_read(sd, REG_CLK_A_STATUS);
+ /* ignore if not active */
+ if ((reg & MASK_CLK_STABLE) && !(reg & MASK_CLK_ACTIVE))
+ reg &= ~MASK_CLK_STABLE;
+ status |= ((reg & MASK_CLK_STABLE) >> 2);
+
+ /* Read CLK_B_STATUS register */
+ reg = io_read(sd, REG_CLK_B_STATUS);
+ /* ignore if not active */
+ if ((reg & MASK_CLK_STABLE) && !(reg & MASK_CLK_ACTIVE))
+ reg &= ~MASK_CLK_STABLE;
+ status |= ((reg & MASK_CLK_STABLE) >> 1);
+
+ /* Read the SUS_STATUS register */
+ reg = io_read(sd, REG_SUS_STATUS);
+
+ /* If state = 5 => TMDS is locked */
+ if ((reg & MASK_SUS_STATUS) == LAST_STATE_REACHED)
+ status |= MASK_SUS_STATE;
+ else
+ status &= ~MASK_SUS_STATE;
+
+ return status;
+}
+
+static void
+set_rgb_quantization_range(struct tda1997x_state *state)
+{
+ struct v4l2_hdmi_colorimetry *c = &state->colorimetry;
+
+ state->colorimetry = v4l2_hdmi_rx_colorimetry(&state->avi_infoframe,
+ NULL,
+ state->timings.bt.height);
+ /* If ycbcr_enc is V4L2_YCBCR_ENC_DEFAULT, we receive RGB */
+ if (c->ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) {
+ switch (state->rgb_quantization_range) {
+ case V4L2_DV_RGB_RANGE_LIMITED:
+ c->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+ break;
+ case V4L2_DV_RGB_RANGE_FULL:
+ c->quantization = V4L2_QUANTIZATION_LIM_RANGE;
+ break;
+ }
+ }
+ v4l_dbg(1, debug, state->client,
+ "colorspace=%d/%d colorimetry=%d range=%s content=%d\n",
+ state->avi_infoframe.colorspace, c->colorspace,
+ state->avi_infoframe.colorimetry,
+ v4l2_quantization_names[c->quantization],
+ state->avi_infoframe.content_type);
+}
+
+/* parse an infoframe and do some sanity checks on it */
+static unsigned int
+tda1997x_parse_infoframe(struct tda1997x_state *state, u16 addr)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ union hdmi_infoframe frame;
+ u8 buffer[40];
+ u8 reg;
+ int len, err;
+
+ /* read data */
+ len = io_readn(sd, addr, sizeof(buffer), buffer);
+ err = hdmi_infoframe_unpack(&frame, buffer);
+ if (err) {
+ v4l_err(state->client,
+ "failed parsing %d byte infoframe: 0x%04x/0x%02x\n",
+ len, addr, buffer[0]);
+ return err;
+ }
+ hdmi_infoframe_log(KERN_INFO, &state->client->dev, &frame);
+ switch (frame.any.type) {
+ /* Audio InfoFrame: see HDMI spec 8.2.2 */
+ case HDMI_INFOFRAME_TYPE_AUDIO:
+ /* sample rate */
+ switch (frame.audio.sample_frequency) {
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_32000:
+ state->audio_samplerate = 32000;
+ break;
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_44100:
+ state->audio_samplerate = 44100;
+ break;
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_48000:
+ state->audio_samplerate = 48000;
+ break;
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_88200:
+ state->audio_samplerate = 88200;
+ break;
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_96000:
+ state->audio_samplerate = 96000;
+ break;
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_176400:
+ state->audio_samplerate = 176400;
+ break;
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_192000:
+ state->audio_samplerate = 192000;
+ break;
+ default:
+ case HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM:
+ break;
+ }
+
+ /* sample size */
+ switch (frame.audio.sample_size) {
+ case HDMI_AUDIO_SAMPLE_SIZE_16:
+ state->audio_samplesize = 16;
+ break;
+ case HDMI_AUDIO_SAMPLE_SIZE_20:
+ state->audio_samplesize = 20;
+ break;
+ case HDMI_AUDIO_SAMPLE_SIZE_24:
+ state->audio_samplesize = 24;
+ break;
+ case HDMI_AUDIO_SAMPLE_SIZE_STREAM:
+ default:
+ break;
+ }
+
+ /* Channel Count */
+ state->audio_channels = frame.audio.channels;
+ if (frame.audio.channel_allocation &&
+ frame.audio.channel_allocation != state->audio_ch_alloc) {
+ /* use the channel assignment from the infoframe */
+ state->audio_ch_alloc = frame.audio.channel_allocation;
+ tda1997x_configure_audout(sd, state->audio_ch_alloc);
+ /* reset the audio FIFO */
+ tda1997x_hdmi_info_reset(sd, RESET_AUDIO, false);
+ }
+ break;
+
+ /* Auxiliary Video information (AVI) InfoFrame: see HDMI spec 8.2.1 */
+ case HDMI_INFOFRAME_TYPE_AVI:
+ state->avi_infoframe = frame.avi;
+ set_rgb_quantization_range(state);
+
+ /* configure upsampler: 0=bypass 1=repeatchroma 2=interpolate */
+ reg = io_read(sd, REG_PIX_REPEAT);
+ reg &= ~PIX_REPEAT_MASK_UP_SEL;
+ if (frame.avi.colorspace == HDMI_COLORSPACE_YUV422)
+ reg |= (PIX_REPEAT_CHROMA << PIX_REPEAT_SHIFT);
+ io_write(sd, REG_PIX_REPEAT, reg);
+
+ /* ConfigurePixelRepeater: repeat n-times each pixel */
+ reg = io_read(sd, REG_PIX_REPEAT);
+ reg &= ~PIX_REPEAT_MASK_REP;
+ reg |= frame.avi.pixel_repeat;
+ io_write(sd, REG_PIX_REPEAT, reg);
+
+ /* configure the receiver with the new colorspace */
+ tda1997x_configure_csc(sd);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static void tda1997x_irq_sus(struct tda1997x_state *state, u8 *flags)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 reg, source;
+
+ source = io_read(sd, REG_INT_FLG_CLR_SUS);
+ io_write(sd, REG_INT_FLG_CLR_SUS, source);
+
+ if (source & MASK_MPT) {
+ /* reset MTP in use flag if set */
+ if (state->mptrw_in_progress)
+ state->mptrw_in_progress = 0;
+ }
+
+ if (source & MASK_SUS_END) {
+ /* reset audio FIFO */
+ reg = io_read(sd, REG_HDMI_INFO_RST);
+ reg |= MASK_SR_FIFO_FIFO_CTRL;
+ io_write(sd, REG_HDMI_INFO_RST, reg);
+ reg &= ~MASK_SR_FIFO_FIFO_CTRL;
+ io_write(sd, REG_HDMI_INFO_RST, reg);
+
+ /* reset HDMI flags */
+ state->hdmi_status = 0;
+ }
+
+ /* filter FMT interrupt based on SUS state */
+ reg = io_read(sd, REG_SUS_STATUS);
+ if (((reg & MASK_SUS_STATUS) != LAST_STATE_REACHED)
+ || (source & MASK_MPT)) {
+ source &= ~MASK_FMT;
+ }
+
+ if (source & (MASK_FMT | MASK_SUS_END)) {
+ reg = io_read(sd, REG_SUS_STATUS);
+ if ((reg & MASK_SUS_STATUS) != LAST_STATE_REACHED) {
+ v4l_err(state->client, "BAD SUS STATUS\n");
+ return;
+ }
+ if (debug)
+ tda1997x_detect_std(state, NULL);
+ /* notify user of change in resolution */
+ v4l2_subdev_notify_event(&state->sd, &tda1997x_ev_fmt);
+ }
+}
+
+static void tda1997x_irq_ddc(struct tda1997x_state *state, u8 *flags)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 source;
+
+ source = io_read(sd, REG_INT_FLG_CLR_DDC);
+ io_write(sd, REG_INT_FLG_CLR_DDC, source);
+ if (source & MASK_EDID_MTP) {
+ /* reset MTP in use flag if set */
+ if (state->mptrw_in_progress)
+ state->mptrw_in_progress = 0;
+ }
+
+ /* Detection of +5V */
+ if (source & MASK_DET_5V) {
+ v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
+ tda1997x_detect_tx_5v(sd));
+ }
+}
+
+static void tda1997x_irq_rate(struct tda1997x_state *state, u8 *flags)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 reg, source;
+
+ u8 irq_status, last_irq_status;
+
+ source = io_read(sd, REG_INT_FLG_CLR_RATE);
+ io_write(sd, REG_INT_FLG_CLR_RATE, source);
+
+ /* read status regs */
+ last_irq_status = irq_status = tda1997x_read_activity_status_regs(sd);
+
+ /*
+ * read clock status reg until INT_FLG_CLR_RATE is still 0
+ * after the read to make sure its the last one
+ */
+ reg = source;
+ while (reg != 0) {
+ irq_status = tda1997x_read_activity_status_regs(sd);
+ reg = io_read(sd, REG_INT_FLG_CLR_RATE);
+ io_write(sd, REG_INT_FLG_CLR_RATE, reg);
+ source |= reg;
+ }
+
+ /* we only pay attention to stability change events */
+ if (source & (MASK_RATE_A_ST | MASK_RATE_B_ST)) {
+ int input = (source & MASK_RATE_A_ST)?0:1;
+ u8 mask = 1<<input;
+
+ /* state change */
+ if ((irq_status & mask) != (state->activity_status & mask)) {
+ /* activity lost */
+ if ((irq_status & mask) == 0) {
+ v4l_info(state->client,
+ "HDMI-%c: Digital Activity Lost\n",
+ input+'A');
+
+ /* bypass up/down sampler and pixel repeater */
+ reg = io_read(sd, REG_PIX_REPEAT);
+ reg &= ~PIX_REPEAT_MASK_UP_SEL;
+ reg &= ~PIX_REPEAT_MASK_REP;
+ io_write(sd, REG_PIX_REPEAT, reg);
+
+ if (state->chip_revision == 0)
+ tda1997x_reset_n1(state);
+
+ state->input_detect[input] = 0;
+ v4l2_subdev_notify_event(sd, &tda1997x_ev_fmt);
+ }
+
+ /* activity detected */
+ else {
+ v4l_info(state->client,
+ "HDMI-%c: Digital Activity Detected\n",
+ input+'A');
+ state->input_detect[input] = 1;
+ }
+
+ /* hold onto current state */
+ state->activity_status = (irq_status & mask);
+ }
+ }
+}
+
+static void tda1997x_irq_info(struct tda1997x_state *state, u8 *flags)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 source;
+
+ source = io_read(sd, REG_INT_FLG_CLR_INFO);
+ io_write(sd, REG_INT_FLG_CLR_INFO, source);
+
+ /* Audio infoframe */
+ if (source & MASK_AUD_IF) {
+ tda1997x_parse_infoframe(state, AUD_IF);
+ source &= ~MASK_AUD_IF;
+ }
+
+ /* Source Product Descriptor infoframe change */
+ if (source & MASK_SPD_IF) {
+ tda1997x_parse_infoframe(state, SPD_IF);
+ source &= ~MASK_SPD_IF;
+ }
+
+ /* Auxiliary Video Information infoframe */
+ if (source & MASK_AVI_IF) {
+ tda1997x_parse_infoframe(state, AVI_IF);
+ source &= ~MASK_AVI_IF;
+ }
+}
+
+static void tda1997x_irq_audio(struct tda1997x_state *state, u8 *flags)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 reg, source;
+
+ source = io_read(sd, REG_INT_FLG_CLR_AUDIO);
+ io_write(sd, REG_INT_FLG_CLR_AUDIO, source);
+
+ /* reset audio FIFO on FIFO pointer error or audio mute */
+ if (source & MASK_ERROR_FIFO_PT ||
+ source & MASK_MUTE_FLG) {
+ /* audio reset audio FIFO */
+ reg = io_read(sd, REG_SUS_STATUS);
+ if ((reg & MASK_SUS_STATUS) == LAST_STATE_REACHED) {
+ reg = io_read(sd, REG_HDMI_INFO_RST);
+ reg |= MASK_SR_FIFO_FIFO_CTRL;
+ io_write(sd, REG_HDMI_INFO_RST, reg);
+ reg &= ~MASK_SR_FIFO_FIFO_CTRL;
+ io_write(sd, REG_HDMI_INFO_RST, reg);
+ /* reset channel status IT if present */
+ source &= ~(MASK_CH_STATE);
+ }
+ }
+ if (source & MASK_AUDIO_FREQ_FLG) {
+ static const int freq[] = {
+ 0, 32000, 44100, 48000, 88200, 96000, 176400, 192000
+ };
+
+ reg = io_read(sd, REG_AUDIO_FREQ);
+ state->audio_samplerate = freq[reg & 7];
+ v4l_info(state->client, "Audio Frequency Change: %dHz\n",
+ state->audio_samplerate);
+ }
+ if (source & MASK_AUDIO_FLG) {
+ reg = io_read(sd, REG_AUDIO_FLAGS);
+ if (reg & BIT(AUDCFG_TYPE_DST))
+ state->audio_type = AUDCFG_TYPE_DST;
+ if (reg & BIT(AUDCFG_TYPE_OBA))
+ state->audio_type = AUDCFG_TYPE_OBA;
+ if (reg & BIT(AUDCFG_TYPE_HBR))
+ state->audio_type = AUDCFG_TYPE_HBR;
+ if (reg & BIT(AUDCFG_TYPE_PCM))
+ state->audio_type = AUDCFG_TYPE_PCM;
+ v4l_info(state->client, "Audio Type: %s\n",
+ audtype_names[state->audio_type]);
+ }
+}
+
+static void tda1997x_irq_hdcp(struct tda1997x_state *state, u8 *flags)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 reg, source;
+
+ source = io_read(sd, REG_INT_FLG_CLR_HDCP);
+ io_write(sd, REG_INT_FLG_CLR_HDCP, source);
+
+ /* reset MTP in use flag if set */
+ if (source & MASK_HDCP_MTP)
+ state->mptrw_in_progress = 0;
+ if (source & MASK_STATE_C5) {
+ /* REPEATER: mask AUDIO and IF irqs to avoid IF during auth */
+ reg = io_read(sd, REG_INT_MASK_TOP);
+ reg &= ~(INTERRUPT_AUDIO | INTERRUPT_INFO);
+ io_write(sd, REG_INT_MASK_TOP, reg);
+ *flags &= (INTERRUPT_AUDIO | INTERRUPT_INFO);
+ }
+}
+
+static irqreturn_t tda1997x_isr_thread(int irq, void *d)
+{
+ struct tda1997x_state *state = d;
+ struct v4l2_subdev *sd = &state->sd;
+ u8 flags;
+
+ mutex_lock(&state->lock);
+ do {
+ /* read interrupt flags */
+ flags = io_read(sd, REG_INT_FLG_CLR_TOP);
+ if (flags == 0)
+ break;
+
+ /* SUS interrupt source (Input activity events) */
+ if (flags & INTERRUPT_SUS)
+ tda1997x_irq_sus(state, &flags);
+ /* DDC interrupt source (Display Data Channel) */
+ else if (flags & INTERRUPT_DDC)
+ tda1997x_irq_ddc(state, &flags);
+ /* RATE interrupt source (Digital Input activity) */
+ else if (flags & INTERRUPT_RATE)
+ tda1997x_irq_rate(state, &flags);
+ /* Infoframe change interrupt */
+ else if (flags & INTERRUPT_INFO)
+ tda1997x_irq_info(state, &flags);
+ /* Audio interrupt source:
+ * freq change, DST,OBA,HBR,ASP flags, mute, FIFO err
+ */
+ else if (flags & INTERRUPT_AUDIO)
+ tda1997x_irq_audio(state, &flags);
+ /* HDCP interrupt source (content protection) */
+ if (flags & INTERRUPT_HDCP)
+ tda1997x_irq_hdcp(state, &flags);
+ } while (flags != 0);
+ mutex_unlock(&state->lock);
+
+ return IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * v4l2_subdev_video_ops
+ */
+
+static int
+tda1997x_g_input_status(struct v4l2_subdev *sd, u32 *status)
+{
+ struct tda1997x_state *state = to_state(sd);
+ u32 vper;
+ u16 hper;
+ u16 hsper;
+
+ mutex_lock(&state->lock);
+ vper = io_read24(sd, REG_V_PER) & MASK_VPER;
+ hper = io_read16(sd, REG_H_PER) & MASK_HPER;
+ hsper = io_read16(sd, REG_HS_WIDTH) & MASK_HSWIDTH;
+ /*
+ * The tda1997x supports A/B inputs but only a single output.
+ * The irq handler monitors for timing changes on both inputs and
+ * sets the input_detect array to 0|1 depending on signal presence.
+ * I believe selection of A vs B is automatic.
+ *
+ * The vper/hper/hsper registers provide the frame period, line period
+ * and horiz sync period (units of MCLK clock cycles (27MHz)) and
+ * testin shows these values to be random if no signal is present
+ * or locked.
+ */
+ v4l2_dbg(1, debug, sd, "inputs:%d/%d timings:%d/%d/%d\n",
+ state->input_detect[0], state->input_detect[1],
+ vper, hper, hsper);
+ if (!state->input_detect[0] && !state->input_detect[1])
+ *status = V4L2_IN_ST_NO_SIGNAL;
+ else if (!vper || !hper || !hsper)
+ *status = V4L2_IN_ST_NO_SYNC;
+ else
+ *status = 0;
+ mutex_unlock(&state->lock);
+
+ return 0;
+};
+
+static int tda1997x_s_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings *timings)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l_dbg(1, debug, state->client, "%s\n", __func__);
+
+ if (v4l2_match_dv_timings(&state->timings, timings, 0, false))
+ return 0; /* no changes */
+
+ if (!v4l2_valid_dv_timings(timings, &tda1997x_dv_timings_cap,
+ NULL, NULL))
+ return -ERANGE;
+
+ mutex_lock(&state->lock);
+ state->timings = *timings;
+ /* setup frame detection window and VHREF timing generator */
+ tda1997x_configure_vhref(sd);
+ /* configure colorspace conversion */
+ tda1997x_configure_csc(sd);
+ mutex_unlock(&state->lock);
+
+ return 0;
+}
+
+static int tda1997x_g_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings *timings)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l_dbg(1, debug, state->client, "%s\n", __func__);
+ mutex_lock(&state->lock);
+ *timings = state->timings;
+ mutex_unlock(&state->lock);
+
+ return 0;
+}
+
+static int tda1997x_query_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings *timings)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l_dbg(1, debug, state->client, "%s\n", __func__);
+ memset(timings, 0, sizeof(struct v4l2_dv_timings));
+ mutex_lock(&state->lock);
+ tda1997x_detect_std(state, timings);
+ mutex_unlock(&state->lock);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops tda1997x_video_ops = {
+ .g_input_status = tda1997x_g_input_status,
+ .s_dv_timings = tda1997x_s_dv_timings,
+ .g_dv_timings = tda1997x_g_dv_timings,
+ .query_dv_timings = tda1997x_query_dv_timings,
+};
+
+
+/* -----------------------------------------------------------------------------
+ * v4l2_subdev_pad_ops
+ */
+
+static int tda1997x_init_cfg(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg)
+{
+ struct tda1997x_state *state = to_state(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ mf = v4l2_subdev_get_try_format(sd, cfg, 0);
+ mf->code = state->mbus_codes[0];
+
+ return 0;
+}
+
+static int tda1997x_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l_dbg(1, debug, state->client, "%s %d\n", __func__, code->index);
+ if (code->index >= ARRAY_SIZE(state->mbus_codes))
+ return -EINVAL;
+
+ if (!state->mbus_codes[code->index])
+ return -EINVAL;
+
+ code->code = state->mbus_codes[code->index];
+
+ return 0;
+}
+
+static void tda1997x_fill_format(struct tda1997x_state *state,
+ struct v4l2_mbus_framefmt *format)
+{
+ const struct v4l2_bt_timings *bt;
+
+ memset(format, 0, sizeof(*format));
+ bt = &state->timings.bt;
+ format->width = bt->width;
+ format->height = bt->height;
+ format->colorspace = state->colorimetry.colorspace;
+ format->field = (bt->interlaced) ?
+ V4L2_FIELD_SEQ_TB : V4L2_FIELD_NONE;
+}
+
+static int tda1997x_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l_dbg(1, debug, state->client, "%s pad=%d which=%d\n",
+ __func__, format->pad, format->which);
+
+ tda1997x_fill_format(state, &format->format);
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_mbus_framefmt *fmt;
+
+ fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+ format->format.code = fmt->code;
+ } else
+ format->format.code = state->mbus_code;
+
+ return 0;
+}
+
+static int tda1997x_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct tda1997x_state *state = to_state(sd);
+ u32 code = 0;
+ int i;
+
+ v4l_dbg(1, debug, state->client, "%s pad=%d which=%d fmt=0x%x\n",
+ __func__, format->pad, format->which, format->format.code);
+
+ for (i = 0; i < ARRAY_SIZE(state->mbus_codes); i++) {
+ if (format->format.code == state->mbus_codes[i]) {
+ code = state->mbus_codes[i];
+ break;
+ }
+ }
+ if (!code)
+ code = state->mbus_codes[0];
+
+ tda1997x_fill_format(state, &format->format);
+ format->format.code = code;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ struct v4l2_mbus_framefmt *fmt;
+
+ fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+ *fmt = format->format;
+ } else {
+ int ret = tda1997x_setup_format(state, format->format.code);
+
+ if (ret)
+ return ret;
+ /* mbus_code has changed - re-configure csc/vidout */
+ tda1997x_configure_csc(sd);
+ tda1997x_configure_vidout(state);
+ }
+
+ return 0;
+}
+
+static int tda1997x_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
+{
+ struct tda1997x_state *state = to_state(sd);
+
+ v4l_dbg(1, debug, state->client, "%s pad=%d\n", __func__, edid->pad);
+ memset(edid->reserved, 0, sizeof(edid->reserved));
+
+ if (edid->start_block == 0 && edid->blocks == 0) {
+ edid->blocks = state->edid.blocks;
+ return 0;
+ }
+
+ if (!state->edid.present)
+ return -ENODATA;
+
+ if (edid->start_block >= state->edid.blocks)
+ return -EINVAL;
+
+ if (edid->start_block + edid->blocks > state->edid.blocks)
+ edid->blocks = state->edid.blocks - edid->start_block;
+
+ memcpy(edid->edid, state->edid.edid + edid->start_block * 128,
+ edid->blocks * 128);
+
+ return 0;
+}
+
+static int tda1997x_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
+{
+ struct tda1997x_state *state = to_state(sd);
+ int i;
+
+ v4l_dbg(1, debug, state->client, "%s pad=%d\n", __func__, edid->pad);
+ memset(edid->reserved, 0, sizeof(edid->reserved));
+
+ if (edid->start_block != 0)
+ return -EINVAL;
+
+ if (edid->blocks == 0) {
+ state->edid.blocks = 0;
+ state->edid.present = 0;
+ tda1997x_disable_edid(sd);
+ return 0;
+ }
+
+ if (edid->blocks > 2) {
+ edid->blocks = 2;
+ return -E2BIG;
+ }
+
+ tda1997x_disable_edid(sd);
+
+ /* write base EDID */
+ for (i = 0; i < 128; i++)
+ io_write(sd, REG_EDID_IN_BYTE0 + i, edid->edid[i]);
+
+ /* write CEA Extension */
+ for (i = 0; i < 128; i++)
+ io_write(sd, REG_EDID_IN_BYTE128 + i, edid->edid[i+128]);
+
+ tda1997x_enable_edid(sd);
+
+ return 0;
+}
+
+static int tda1997x_get_dv_timings_cap(struct v4l2_subdev *sd,
+ struct v4l2_dv_timings_cap *cap)
+{
+ *cap = tda1997x_dv_timings_cap;
+ return 0;
+}
+
+static int tda1997x_enum_dv_timings(struct v4l2_subdev *sd,
+ struct v4l2_enum_dv_timings *timings)
+{
+ return v4l2_enum_dv_timings_cap(timings, &tda1997x_dv_timings_cap,
+ NULL, NULL);
+}
+
+static const struct v4l2_subdev_pad_ops tda1997x_pad_ops = {
+ .init_cfg = tda1997x_init_cfg,
+ .enum_mbus_code = tda1997x_enum_mbus_code,
+ .get_fmt = tda1997x_get_format,
+ .set_fmt = tda1997x_set_format,
+ .get_edid = tda1997x_get_edid,
+ .set_edid = tda1997x_set_edid,
+ .dv_timings_cap = tda1997x_get_dv_timings_cap,
+ .enum_dv_timings = tda1997x_enum_dv_timings,
+};
+
+/* -----------------------------------------------------------------------------
+ * v4l2_subdev_core_ops
+ */
+
+static int tda1997x_log_infoframe(struct v4l2_subdev *sd, int addr)
+{
+ struct tda1997x_state *state = to_state(sd);
+ union hdmi_infoframe frame;
+ u8 buffer[40];
+ int len, err;
+
+ /* read data */
+ len = io_readn(sd, addr, sizeof(buffer), buffer);
+ v4l2_dbg(1, debug, sd, "infoframe: addr=%d len=%d\n", addr, len);
+ err = hdmi_infoframe_unpack(&frame, buffer);
+ if (err) {
+ v4l_err(state->client,
+ "failed parsing %d byte infoframe: 0x%04x/0x%02x\n",
+ len, addr, buffer[0]);
+ return err;
+ }
+ hdmi_infoframe_log(KERN_INFO, &state->client->dev, &frame);
+
+ return 0;
+}
+
+static int tda1997x_log_status(struct v4l2_subdev *sd)
+{
+ struct tda1997x_state *state = to_state(sd);
+ struct v4l2_dv_timings timings;
+ struct hdmi_avi_infoframe *avi = &state->avi_infoframe;
+
+ v4l2_info(sd, "-----Chip status-----\n");
+ v4l2_info(sd, "Chip: %s N%d\n", state->info->name,
+ state->chip_revision + 1);
+ v4l2_info(sd, "EDID Enabled: %s\n", state->edid.present ? "yes" : "no");
+
+ v4l2_info(sd, "-----Signal status-----\n");
+ v4l2_info(sd, "Cable detected (+5V power): %s\n",
+ tda1997x_detect_tx_5v(sd) ? "yes" : "no");
+ v4l2_info(sd, "HPD detected: %s\n",
+ tda1997x_detect_tx_hpd(sd) ? "yes" : "no");
+
+ v4l2_info(sd, "-----Video Timings-----\n");
+ switch (tda1997x_detect_std(state, &timings)) {
+ case -ENOLINK:
+ v4l2_info(sd, "No video detected\n");
+ break;
+ case -ERANGE:
+ v4l2_info(sd, "Invalid signal detected\n");
+ break;
+ }
+ v4l2_print_dv_timings(sd->name, "Configured format: ",
+ &state->timings, true);
+
+ v4l2_info(sd, "-----Color space-----\n");
+ v4l2_info(sd, "Input color space: %s %s %s",
+ hdmi_colorspace_names[avi->colorspace],
+ (avi->colorspace == HDMI_COLORSPACE_RGB) ? "" :
+ hdmi_colorimetry_names[avi->colorimetry],
+ v4l2_quantization_names[state->colorimetry.quantization]);
+ v4l2_info(sd, "Output color space: %s",
+ vidfmt_names[state->vid_fmt]);
+ v4l2_info(sd, "Color space conversion: %s", state->conv ?
+ state->conv->name : "None");
+
+ v4l2_info(sd, "-----Audio-----\n");
+ if (state->audio_channels) {
+ v4l2_info(sd, "audio: %dch %dHz\n", state->audio_channels,
+ state->audio_samplerate);
+ } else {
+ v4l2_info(sd, "audio: none\n");
+ }
+
+ v4l2_info(sd, "-----Infoframes-----\n");
+ tda1997x_log_infoframe(sd, AUD_IF);
+ tda1997x_log_infoframe(sd, SPD_IF);
+ tda1997x_log_infoframe(sd, AVI_IF);
+
+ return 0;
+}
+
+static int tda1997x_subscribe_event(struct v4l2_subdev *sd,
+ struct v4l2_fh *fh,
+ struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
+ case V4L2_EVENT_CTRL:
+ return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct v4l2_subdev_core_ops tda1997x_core_ops = {
+ .log_status = tda1997x_log_status,
+ .subscribe_event = tda1997x_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+/* -----------------------------------------------------------------------------
+ * v4l2_subdev_ops
+ */
+
+static const struct v4l2_subdev_ops tda1997x_subdev_ops = {
+ .core = &tda1997x_core_ops,
+ .video = &tda1997x_video_ops,
+ .pad = &tda1997x_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * v4l2_controls
+ */
+
+static int tda1997x_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_subdev *sd = to_sd(ctrl);
+ struct tda1997x_state *state = to_state(sd);
+
+ switch (ctrl->id) {
+ /* allow overriding the default RGB quantization range */
+ case V4L2_CID_DV_RX_RGB_RANGE:
+ state->rgb_quantization_range = ctrl->val;
+ set_rgb_quantization_range(state);
+ tda1997x_configure_csc(sd);
+ return 0;
+ }
+
+ return -EINVAL;
+};
+
+static int tda1997x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_subdev *sd = to_sd(ctrl);
+ struct tda1997x_state *state = to_state(sd);
+
+ if (ctrl->id == V4L2_CID_DV_RX_IT_CONTENT_TYPE) {
+ ctrl->val = state->avi_infoframe.content_type;
+ return 0;
+ }
+ return -EINVAL;
+};
+
+static const struct v4l2_ctrl_ops tda1997x_ctrl_ops = {
+ .s_ctrl = tda1997x_s_ctrl,
+ .g_volatile_ctrl = tda1997x_g_volatile_ctrl,
+};
+
+static int tda1997x_core_init(struct v4l2_subdev *sd)
+{
+ struct tda1997x_state *state = to_state(sd);
+ struct tda1997x_platform_data *pdata = &state->pdata;
+ u8 reg;
+ int i;
+
+ /* disable HPD */
+ io_write(sd, REG_HPD_AUTO_CTRL, HPD_AUTO_HPD_UNSEL);
+ if (state->chip_revision == 0) {
+ io_write(sd, REG_MAN_SUS_HDMI_SEL, MAN_DIS_HDCP | MAN_RST_HDCP);
+ io_write(sd, REG_CGU_DBG_SEL, 1 << CGU_DBG_CLK_SEL_SHIFT);
+ }
+
+ /* reset infoframe at end of start-up-sequencer */
+ io_write(sd, REG_SUS_SET_RGB2, 0x06);
+ io_write(sd, REG_SUS_SET_RGB3, 0x06);
+
+ /* Enable TMDS pull-ups */
+ io_write(sd, REG_RT_MAN_CTRL, RT_MAN_CTRL_RT |
+ RT_MAN_CTRL_RT_B | RT_MAN_CTRL_RT_A);
+
+ /* enable sync measurement timing */
+ tda1997x_cec_write(sd, REG_PWR_CONTROL & 0xff, 0x04);
+ /* adjust CEC clock divider */
+ tda1997x_cec_write(sd, REG_OSC_DIVIDER & 0xff, 0x03);
+ tda1997x_cec_write(sd, REG_EN_OSC_PERIOD_LSB & 0xff, 0xa0);
+ io_write(sd, REG_TIMER_D, 0x54);
+ /* enable power switch */
+ reg = tda1997x_cec_read(sd, REG_CONTROL & 0xff);
+ reg |= 0x20;
+ tda1997x_cec_write(sd, REG_CONTROL & 0xff, reg);
+ mdelay(50);
+
+ /* read the chip version */
+ reg = io_read(sd, REG_VERSION);
+ /* get the chip configuration */
+ reg = io_read(sd, REG_CMTP_REG10);
+
+ /* enable interrupts we care about */
+ io_write(sd, REG_INT_MASK_TOP,
+ INTERRUPT_HDCP | INTERRUPT_AUDIO | INTERRUPT_INFO |
+ INTERRUPT_RATE | INTERRUPT_SUS);
+ /* config_mtp,fmt,sus_end,sus_st */
+ io_write(sd, REG_INT_MASK_SUS, MASK_MPT | MASK_FMT | MASK_SUS_END);
+ /* rate stability change for inputs A/B */
+ io_write(sd, REG_INT_MASK_RATE, MASK_RATE_B_ST | MASK_RATE_A_ST);
+ /* aud,spd,avi*/
+ io_write(sd, REG_INT_MASK_INFO,
+ MASK_AUD_IF | MASK_SPD_IF | MASK_AVI_IF);
+ /* audio_freq,audio_flg,mute_flg,fifo_err */
+ io_write(sd, REG_INT_MASK_AUDIO,
+ MASK_AUDIO_FREQ_FLG | MASK_AUDIO_FLG | MASK_MUTE_FLG |
+ MASK_ERROR_FIFO_PT);
+ /* HDCP C5 state reached */
+ io_write(sd, REG_INT_MASK_HDCP, MASK_STATE_C5);
+ /* 5V detect and HDP pulse end */
+ io_write(sd, REG_INT_MASK_DDC, MASK_DET_5V);
+ /* don't care about AFE/MODE */
+ io_write(sd, REG_INT_MASK_AFE, 0);
+ io_write(sd, REG_INT_MASK_MODE, 0);
+
+ /* clear all interrupts */
+ io_write(sd, REG_INT_FLG_CLR_TOP, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_SUS, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_DDC, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_RATE, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_MODE, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_INFO, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_AUDIO, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_HDCP, 0xff);
+ io_write(sd, REG_INT_FLG_CLR_AFE, 0xff);
+
+ /* init TMDS equalizer */
+ if (state->chip_revision == 0)
+ io_write(sd, REG_CGU_DBG_SEL, 1 << CGU_DBG_CLK_SEL_SHIFT);
+ io_write24(sd, REG_CLK_MIN_RATE, CLK_MIN_RATE);
+ io_write24(sd, REG_CLK_MAX_RATE, CLK_MAX_RATE);
+ if (state->chip_revision == 0)
+ io_write(sd, REG_WDL_CFG, WDL_CFG_VAL);
+ /* DC filter */
+ io_write(sd, REG_DEEP_COLOR_CTRL, DC_FILTER_VAL);
+ /* disable test pattern */
+ io_write(sd, REG_SVC_MODE, 0x00);
+ /* update HDMI INFO CTRL */
+ io_write(sd, REG_INFO_CTRL, 0xff);
+ /* write HDMI INFO EXCEED value */
+ io_write(sd, REG_INFO_EXCEED, 3);
+
+ if (state->chip_revision == 0)
+ tda1997x_reset_n1(state);
+
+ /*
+ * No HDCP acknowledge when HDCP is disabled
+ * and reset SUS to force format detection
+ */
+ tda1997x_hdmi_info_reset(sd, NACK_HDCP, true);
+
+ /* Set HPD low */
+ tda1997x_manual_hpd(sd, HPD_LOW_BP);
+
+ /* Configure receiver capabilities */
+ io_write(sd, REG_HDCP_BCAPS, HDCP_HDMI | HDCP_FAST_REAUTH);
+
+ /* Configure HDMI: Auto HDCP mode, packet controlled mute */
+ reg = HDMI_CTRL_MUTE_AUTO << HDMI_CTRL_MUTE_SHIFT;
+ reg |= HDMI_CTRL_HDCP_AUTO << HDMI_CTRL_HDCP_SHIFT;
+ io_write(sd, REG_HDMI_CTRL, reg);
+
+ /* reset start-up-sequencer to force format detection */
+ tda1997x_hdmi_info_reset(sd, 0, true);
+
+ /* disable matrix conversion */
+ reg = io_read(sd, REG_VDP_CTRL);
+ reg |= VDP_CTRL_MATRIX_BP;
+ io_write(sd, REG_VDP_CTRL, reg);
+
+ /* set video output mode */
+ tda1997x_configure_vidout(state);
+
+ /* configure video output port */
+ for (i = 0; i < 9; i++) {
+ v4l_dbg(1, debug, state->client, "vidout_cfg[%d]=0x%02x\n", i,
+ pdata->vidout_port_cfg[i]);
+ io_write(sd, REG_VP35_32_CTRL + i, pdata->vidout_port_cfg[i]);
+ }
+
+ /* configure audio output port */
+ tda1997x_configure_audout(sd, 0);
+
+ /* configure audio clock freq */
+ switch (pdata->audout_mclk_fs) {
+ case 512:
+ reg = AUDIO_CLOCK_SEL_512FS;
+ break;
+ case 256:
+ reg = AUDIO_CLOCK_SEL_256FS;
+ break;
+ case 128:
+ reg = AUDIO_CLOCK_SEL_128FS;
+ break;
+ case 64:
+ reg = AUDIO_CLOCK_SEL_64FS;
+ break;
+ case 32:
+ reg = AUDIO_CLOCK_SEL_32FS;
+ break;
+ default:
+ reg = AUDIO_CLOCK_SEL_16FS;
+ break;
+ }
+ io_write(sd, REG_AUDIO_CLOCK, reg);
+
+ /* reset advanced infoframes (ISRC1/ISRC2/ACP) */
+ tda1997x_hdmi_info_reset(sd, RESET_AI, false);
+ /* reset infoframe */
+ tda1997x_hdmi_info_reset(sd, RESET_IF, false);
+ /* reset audio infoframes */
+ tda1997x_hdmi_info_reset(sd, RESET_AUDIO, false);
+ /* reset gamut */
+ tda1997x_hdmi_info_reset(sd, RESET_GAMUT, false);
+
+ /* get initial HDMI status */
+ state->hdmi_status = io_read(sd, REG_HDMI_FLAGS);
+
+ return 0;
+}
+
+static int tda1997x_set_power(struct tda1997x_state *state, bool on)
+{
+ int ret = 0;
+
+ if (on) {
+ ret = regulator_bulk_enable(TDA1997X_NUM_SUPPLIES,
+ state->supplies);
+ msleep(300);
+ } else {
+ ret = regulator_bulk_disable(TDA1997X_NUM_SUPPLIES,
+ state->supplies);
+ }
+
+ return ret;
+}
+
+static const struct i2c_device_id tda1997x_i2c_id[] = {
+ {"tda19971", (kernel_ulong_t)&tda1997x_chip_info[TDA19971]},
+ {"tda19973", (kernel_ulong_t)&tda1997x_chip_info[TDA19973]},
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, tda1997x_i2c_id);
+
+static const struct of_device_id tda1997x_of_id[] __maybe_unused = {
+ { .compatible = "nxp,tda19971", .data = &tda1997x_chip_info[TDA19971] },
+ { .compatible = "nxp,tda19973", .data = &tda1997x_chip_info[TDA19973] },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tda1997x_of_id);
+
+static int tda1997x_parse_dt(struct tda1997x_state *state)
+{
+ struct tda1997x_platform_data *pdata = &state->pdata;
+ struct v4l2_fwnode_endpoint bus_cfg;
+ struct device_node *ep;
+ struct device_node *np;
+ unsigned int flags;
+ const char *str;
+ int ret;
+ u32 v;
+
+ /*
+ * setup default values:
+ * - HREF: active high from start to end of row
+ * - VS: Vertical Sync active high at beginning of frame
+ * - DE: Active high when data valid
+ * - A_CLK: 128*Fs
+ */
+ pdata->vidout_sel_hs = HS_HREF_SEL_HREF_VHREF;
+ pdata->vidout_sel_vs = VS_VREF_SEL_VREF_HDMI;
+ pdata->vidout_sel_de = DE_FREF_SEL_DE_VHREF;
+
+ np = state->client->dev.of_node;
+ ep = of_graph_get_next_endpoint(np, NULL);
+ if (!ep)
+ return -EINVAL;
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
+ if (ret) {
+ of_node_put(ep);
+ return ret;
+ }
+ of_node_put(ep);
+ pdata->vidout_bus_type = bus_cfg.bus_type;
+
+ /* polarity of HS/VS/DE */
+ flags = bus_cfg.bus.parallel.flags;
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ pdata->vidout_inv_hs = 1;
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ pdata->vidout_inv_vs = 1;
+ if (flags & V4L2_MBUS_DATA_ACTIVE_LOW)
+ pdata->vidout_inv_de = 1;
+ pdata->vidout_bus_width = bus_cfg.bus.parallel.bus_width;
+
+ /* video output port config */
+ ret = of_property_count_u32_elems(np, "nxp,vidout-portcfg");
+ if (ret > 0) {
+ u32 reg, val, i;
+
+ for (i = 0; i < ret / 2 && i < 9; i++) {
+ of_property_read_u32_index(np, "nxp,vidout-portcfg",
+ i * 2, ®);
+ of_property_read_u32_index(np, "nxp,vidout-portcfg",
+ i * 2 + 1, &val);
+ if (reg < 9)
+ pdata->vidout_port_cfg[reg] = val;
+ }
+ } else {
+ v4l_err(state->client, "nxp,vidout-portcfg missing\n");
+ return -EINVAL;
+ }
+
+ /* default to channel layout dictated by packet header */
+ pdata->audout_layoutauto = true;
+
+ pdata->audout_format = AUDFMT_TYPE_DISABLED;
+ if (!of_property_read_string(np, "nxp,audout-format", &str)) {
+ if (strcmp(str, "i2s") == 0)
+ pdata->audout_format = AUDFMT_TYPE_I2S;
+ else if (strcmp(str, "spdif") == 0)
+ pdata->audout_format = AUDFMT_TYPE_SPDIF;
+ else {
+ v4l_err(state->client, "nxp,audout-format invalid\n");
+ return -EINVAL;
+ }
+ if (!of_property_read_u32(np, "nxp,audout-layout", &v)) {
+ switch (v) {
+ case 0:
+ case 1:
+ break;
+ default:
+ v4l_err(state->client,
+ "nxp,audout-layout invalid\n");
+ return -EINVAL;
+ }
+ pdata->audout_layout = v;
+ }
+ if (!of_property_read_u32(np, "nxp,audout-width", &v)) {
+ switch (v) {
+ case 16:
+ case 32:
+ break;
+ default:
+ v4l_err(state->client,
+ "nxp,audout-width invalid\n");
+ return -EINVAL;
+ }
+ pdata->audout_width = v;
+ }
+ if (!of_property_read_u32(np, "nxp,audout-mclk-fs", &v)) {
+ switch (v) {
+ case 512:
+ case 256:
+ case 128:
+ case 64:
+ case 32:
+ case 16:
+ break;
+ default:
+ v4l_err(state->client,
+ "nxp,audout-mclk-fs invalid\n");
+ return -EINVAL;
+ }
+ pdata->audout_mclk_fs = v;
+ }
+ }
+
+ return 0;
+}
+
+static int tda1997x_get_regulators(struct tda1997x_state *state)
+{
+ int i;
+
+ for (i = 0; i < TDA1997X_NUM_SUPPLIES; i++)
+ state->supplies[i].supply = tda1997x_supply_name[i];
+
+ return devm_regulator_bulk_get(&state->client->dev,
+ TDA1997X_NUM_SUPPLIES,
+ state->supplies);
+}
+
+static int tda1997x_identify_module(struct tda1997x_state *state)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ enum tda1997x_type type;
+ u8 reg;
+
+ /* Read chip configuration*/
+ reg = io_read(sd, REG_CMTP_REG10);
+ state->tmdsb_clk = (reg >> 6) & 0x01; /* use tmds clock B_inv for B */
+ state->tmdsb_soc = (reg >> 5) & 0x01; /* tmds of input B */
+ state->port_30bit = (reg >> 2) & 0x03; /* 30bit vs 24bit */
+ state->output_2p5 = (reg >> 1) & 0x01; /* output supply 2.5v */
+ switch ((reg >> 4) & 0x03) {
+ case 0x00:
+ type = TDA19971;
+ break;
+ case 0x02:
+ case 0x03:
+ type = TDA19973;
+ break;
+ default:
+ dev_err(&state->client->dev, "unsupported chip ID\n");
+ return -EIO;
+ }
+ if (state->info->type != type) {
+ dev_err(&state->client->dev, "chip id mismatch\n");
+ return -EIO;
+ }
+
+ /* read chip revision */
+ state->chip_revision = io_read(sd, REG_CMTP_REG11);
+
+ return 0;
+}
+
+static const struct media_entity_operations tda1997x_media_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+
+/* -----------------------------------------------------------------------------
+ * HDMI Audio Codec
+ */
+
+/* refine sample-rate based on HDMI source */
+static int tda1997x_pcm_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct tda1997x_state *state = snd_soc_dai_get_drvdata(dai);
+ struct snd_soc_codec *codec = dai->codec;
+ struct snd_pcm_runtime *rtd = substream->runtime;
+ int rate, err;
+
+ rate = state->audio_samplerate;
+ err = snd_pcm_hw_constraint_minmax(rtd, SNDRV_PCM_HW_PARAM_RATE,
+ rate, rate);
+ if (err < 0) {
+ dev_err(codec->dev, "failed to constrain samplerate to %dHz\n",
+ rate);
+ return err;
+ }
+ dev_info(codec->dev, "set samplerate constraint to %dHz\n", rate);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops tda1997x_dai_ops = {
+ .startup = tda1997x_pcm_startup,
+};
+
+static struct snd_soc_dai_driver tda1997x_audio_dai = {
+ .name = "tda1997x",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |
+ SNDRV_PCM_RATE_192000,
+ },
+ .ops = &tda1997x_dai_ops,
+};
+
+static int tda1997x_codec_probe(struct snd_soc_codec *codec)
+{
+ return 0;
+}
+
+static int tda1997x_codec_remove(struct snd_soc_codec *codec)
+{
+ return 0;
+}
+
+static struct snd_soc_codec_driver tda1997x_codec_driver = {
+ .probe = tda1997x_codec_probe,
+ .remove = tda1997x_codec_remove,
+ .reg_word_size = sizeof(u16),
+};
+
+static int tda1997x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tda1997x_state *state;
+ struct tda1997x_platform_data *pdata;
+ struct v4l2_subdev *sd;
+ struct v4l2_ctrl_handler *hdl;
+ struct v4l2_ctrl *ctrl;
+ static const struct v4l2_dv_timings cea1920x1080 =
+ V4L2_DV_BT_CEA_1920X1080P60;
+ u32 *mbus_codes;
+ int i, ret;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ state = kzalloc(sizeof(struct tda1997x_state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ state->client = client;
+ pdata = &state->pdata;
+ if (IS_ENABLED(CONFIG_OF) && client->dev.of_node) {
+ const struct of_device_id *oid;
+
+ oid = of_match_node(tda1997x_of_id, client->dev.of_node);
+ state->info = oid->data;
+
+ ret = tda1997x_parse_dt(state);
+ if (ret < 0) {
+ v4l_err(client, "DT parsing error\n");
+ goto err_free_state;
+ }
+ } else if (client->dev.platform_data) {
+ struct tda1997x_platform_data *pdata =
+ client->dev.platform_data;
+ state->info =
+ (const struct tda1997x_chip_info *)id->driver_data;
+ state->pdata = *pdata;
+ } else {
+ v4l_err(client, "No platform data\n");
+ ret = -ENODEV;
+ goto err_free_state;
+ }
+
+ ret = tda1997x_get_regulators(state);
+ if (ret)
+ goto err_free_state;
+
+ ret = tda1997x_set_power(state, 1);
+ if (ret)
+ goto err_free_state;
+
+ mutex_init(&state->page_lock);
+ mutex_init(&state->lock);
+ state->page = 0xff;
+
+ INIT_DELAYED_WORK(&state->delayed_work_enable_hpd,
+ tda1997x_delayed_work_enable_hpd);
+
+ /* set video format based on chip and bus width */
+ ret = tda1997x_identify_module(state);
+ if (ret)
+ goto err_free_mutex;
+
+ /* initialize subdev */
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &tda1997x_subdev_ops);
+ snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
+ id->name, i2c_adapter_id(client->adapter),
+ client->addr);
+ sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+ sd->entity.function = MEDIA_ENT_F_DTV_DECODER;
+ sd->entity.ops = &tda1997x_media_ops;
+
+ /* set allowed mbus modes based on chip, bus-type, and bus-width */
+ i = 0;
+ mbus_codes = state->mbus_codes;
+ switch (state->info->type) {
+ case TDA19973:
+ switch (pdata->vidout_bus_type) {
+ case V4L2_MBUS_PARALLEL:
+ switch (pdata->vidout_bus_width) {
+ case 36:
+ mbus_codes[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ mbus_codes[i++] = MEDIA_BUS_FMT_YUV12_1X36;
+ /* fall-through */
+ case 24:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ break;
+ }
+ break;
+ case V4L2_MBUS_BT656:
+ switch (pdata->vidout_bus_width) {
+ case 36:
+ case 24:
+ case 12:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY12_2X12;
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY10_2X10;
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY8_2X8;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ case TDA19971:
+ switch (pdata->vidout_bus_type) {
+ case V4L2_MBUS_PARALLEL:
+ switch (pdata->vidout_bus_width) {
+ case 24:
+ mbus_codes[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ mbus_codes[i++] = MEDIA_BUS_FMT_YUV8_1X24;
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ /* fall through */
+ case 20:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ /* fall through */
+ case 16:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ break;
+ }
+ break;
+ case V4L2_MBUS_BT656:
+ switch (pdata->vidout_bus_width) {
+ case 24:
+ case 20:
+ case 16:
+ case 12:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY12_2X12;
+ /* fall through */
+ case 10:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY10_2X10;
+ /* fall through */
+ case 8:
+ mbus_codes[i++] = MEDIA_BUS_FMT_UYVY8_2X8;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ }
+ if (WARN_ON(i > ARRAY_SIZE(state->mbus_codes))) {
+ ret = -EINVAL;
+ goto err_free_mutex;
+ }
+
+ /* default format */
+ tda1997x_setup_format(state, state->mbus_codes[0]);
+ state->timings = cea1920x1080;
+
+ /*
+ * default to SRGB full range quantization
+ * (in case we don't get an infoframe such as DVI signal
+ */
+ state->colorimetry.colorspace = V4L2_COLORSPACE_SRGB;
+ state->colorimetry.quantization = V4L2_QUANTIZATION_FULL_RANGE;
+
+ /* disable/reset HDCP to get correct I2C access to Rx HDMI */
+ io_write(sd, REG_MAN_SUS_HDMI_SEL, MAN_RST_HDCP | MAN_DIS_HDCP);
+
+ /*
+ * if N2 version, reset compdel_bp as it may generate some small pixel
+ * shifts in case of embedded sync/or delay lower than 4
+ */
+ if (state->chip_revision != 0) {
+ io_write(sd, REG_MAN_SUS_HDMI_SEL, 0x00);
+ io_write(sd, REG_VDP_CTRL, 0x1f);
+ }
+
+ v4l_info(client, "NXP %s N%d detected\n", state->info->name,
+ state->chip_revision + 1);
+ v4l_info(client, "video: %dbit %s %d formats available\n",
+ pdata->vidout_bus_width,
+ (pdata->vidout_bus_type == V4L2_MBUS_PARALLEL) ?
+ "parallel" : "BT656",
+ i);
+ if (pdata->audout_format) {
+ v4l_info(client, "audio: %dch %s layout%d sysclk=%d*fs\n",
+ pdata->audout_layout ? 2 : 8,
+ audfmt_names[pdata->audout_format],
+ pdata->audout_layout,
+ pdata->audout_mclk_fs);
+ }
+
+ ret = 0x34 + ((io_read(sd, REG_SLAVE_ADDR)>>4) & 0x03);
+ state->client_cec = i2c_new_dummy(client->adapter, ret);
+ v4l_info(client, "CEC slave address 0x%02x\n", ret);
+
+ ret = tda1997x_core_init(sd);
+ if (ret)
+ goto err_free_mutex;
+
+ /* control handlers */
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 3);
+ ctrl = v4l2_ctrl_new_std_menu(hdl, &tda1997x_ctrl_ops,
+ V4L2_CID_DV_RX_IT_CONTENT_TYPE,
+ V4L2_DV_IT_CONTENT_TYPE_NO_ITC, 0,
+ V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
+ if (ctrl)
+ ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
+ /* custom controls */
+ state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL,
+ V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0);
+ state->rgb_quantization_range_ctrl = v4l2_ctrl_new_std_menu(hdl,
+ &tda1997x_ctrl_ops,
+ V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, 0,
+ V4L2_DV_RGB_RANGE_AUTO);
+ state->sd.ctrl_handler = hdl;
+ if (hdl->error) {
+ ret = hdl->error;
+ goto err_free_handler;
+ }
+ v4l2_ctrl_handler_setup(hdl);
+
+ /* initialize source pads */
+ state->pads[TDA1997X_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&sd->entity, TDA1997X_NUM_PADS,
+ state->pads);
+ if (ret) {
+ v4l_err(client, "failed entity_init: %d", ret);
+ goto err_free_mutex;
+ }
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret)
+ goto err_free_media;
+
+ /* register audio DAI */
+ if (pdata->audout_format) {
+ u64 formats;
+
+ if (pdata->audout_width == 32)
+ formats = SNDRV_PCM_FMTBIT_S32_LE;
+ else
+ formats = SNDRV_PCM_FMTBIT_S16_LE;
+ tda1997x_audio_dai.capture.formats = formats;
+ ret = snd_soc_register_codec(&state->client->dev,
+ &tda1997x_codec_driver,
+ &tda1997x_audio_dai, 1);
+ if (ret) {
+ dev_err(&client->dev, "register audio codec failed\n");
+ goto err_free_media;
+ }
+ dev_set_drvdata(&state->client->dev, state);
+ v4l_info(state->client, "registered audio codec\n");
+ }
+
+ /* request irq */
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, tda1997x_isr_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ KBUILD_MODNAME, state);
+ if (ret) {
+ v4l_err(client, "irq%d reg failed: %d\n", client->irq, ret);
+ goto err_free_media;
+ }
+
+ return 0;
+
+err_free_media:
+ media_entity_cleanup(&sd->entity);
+err_free_handler:
+ v4l2_ctrl_handler_free(&state->hdl);
+err_free_mutex:
+ cancel_delayed_work(&state->delayed_work_enable_hpd);
+ mutex_destroy(&state->page_lock);
+ mutex_destroy(&state->lock);
+err_free_state:
+ kfree(state);
+ dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int tda1997x_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct tda1997x_state *state = to_state(sd);
+ struct tda1997x_platform_data *pdata = &state->pdata;
+
+ if (pdata->audout_format) {
+ snd_soc_unregister_codec(&client->dev);
+ mutex_destroy(&state->audio_lock);
+ }
+
+ disable_irq(state->client->irq);
+ tda1997x_power_mode(state, 0);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(&state->hdl);
+ regulator_bulk_disable(TDA1997X_NUM_SUPPLIES, state->supplies);
+ i2c_unregister_device(state->client_cec);
+ cancel_delayed_work(&state->delayed_work_enable_hpd);
+ mutex_destroy(&state->page_lock);
+ mutex_destroy(&state->lock);
+
+ kfree(state);
+
+ return 0;
+}
+
+static struct i2c_driver tda1997x_i2c_driver = {
+ .driver = {
+ .name = "tda1997x",
+ .of_match_table = of_match_ptr(tda1997x_of_id),
+ },
+ .probe = tda1997x_probe,
+ .remove = tda1997x_remove,
+ .id_table = tda1997x_i2c_id,
+};
+
+module_i2c_driver(tda1997x_i2c_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey at gateworks.com>");
+MODULE_DESCRIPTION("TDA1997X HDMI Receiver driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/i2c/tda1997x_regs.h b/drivers/media/i2c/tda1997x_regs.h
new file mode 100644
index 0000000..f55dfc4
--- /dev/null
+++ b/drivers/media/i2c/tda1997x_regs.h
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Gateworks Corporation
+ */
+
+/* Page 0x00 - General Control */
+#define REG_VERSION 0x0000
+#define REG_INPUT_SEL 0x0001
+#define REG_SVC_MODE 0x0002
+#define REG_HPD_MAN_CTRL 0x0003
+#define REG_RT_MAN_CTRL 0x0004
+#define REG_STANDBY_SOFT_RST 0x000A
+#define REG_HDMI_SOFT_RST 0x000B
+#define REG_HDMI_INFO_RST 0x000C
+#define REG_INT_FLG_CLR_TOP 0x000E
+#define REG_INT_FLG_CLR_SUS 0x000F
+#define REG_INT_FLG_CLR_DDC 0x0010
+#define REG_INT_FLG_CLR_RATE 0x0011
+#define REG_INT_FLG_CLR_MODE 0x0012
+#define REG_INT_FLG_CLR_INFO 0x0013
+#define REG_INT_FLG_CLR_AUDIO 0x0014
+#define REG_INT_FLG_CLR_HDCP 0x0015
+#define REG_INT_FLG_CLR_AFE 0x0016
+#define REG_INT_MASK_TOP 0x0017
+#define REG_INT_MASK_SUS 0x0018
+#define REG_INT_MASK_DDC 0x0019
+#define REG_INT_MASK_RATE 0x001A
+#define REG_INT_MASK_MODE 0x001B
+#define REG_INT_MASK_INFO 0x001C
+#define REG_INT_MASK_AUDIO 0x001D
+#define REG_INT_MASK_HDCP 0x001E
+#define REG_INT_MASK_AFE 0x001F
+#define REG_DETECT_5V 0x0020
+#define REG_SUS_STATUS 0x0021
+#define REG_V_PER 0x0022
+#define REG_H_PER 0x0025
+#define REG_HS_WIDTH 0x0027
+#define REG_FMT_H_TOT 0x0029
+#define REG_FMT_H_ACT 0x002b
+#define REG_FMT_H_FRONT 0x002d
+#define REG_FMT_H_SYNC 0x002f
+#define REG_FMT_H_BACK 0x0031
+#define REG_FMT_V_TOT 0x0033
+#define REG_FMT_V_ACT 0x0035
+#define REG_FMT_V_FRONT_F1 0x0037
+#define REG_FMT_V_FRONT_F2 0x0038
+#define REG_FMT_V_SYNC 0x0039
+#define REG_FMT_V_BACK_F1 0x003a
+#define REG_FMT_V_BACK_F2 0x003b
+#define REG_FMT_DE_ACT 0x003c
+#define REG_RATE_CTRL 0x0040
+#define REG_CLK_MIN_RATE 0x0043
+#define REG_CLK_MAX_RATE 0x0046
+#define REG_CLK_A_STATUS 0x0049
+#define REG_CLK_A_RATE 0x004A
+#define REG_DRIFT_CLK_A_REG 0x004D
+#define REG_CLK_B_STATUS 0x004E
+#define REG_CLK_B_RATE 0x004F
+#define REG_DRIFT_CLK_B_REG 0x0052
+#define REG_HDCP_CTRL 0x0060
+#define REG_HDCP_KDS 0x0061
+#define REG_HDCP_BCAPS 0x0063
+#define REG_HDCP_KEY_CTRL 0x0064
+#define REG_INFO_CTRL 0x0076
+#define REG_INFO_EXCEED 0x0077
+#define REG_PIX_REPEAT 0x007B
+#define REG_AUDIO_PATH 0x007C
+#define REG_AUDCFG 0x007D
+#define REG_AUDIO_OUT_ENABLE 0x007E
+#define REG_AUDIO_OUT_HIZ 0x007F
+#define REG_VDP_CTRL 0x0080
+#define REG_VDP_MATRIX 0x0081
+#define REG_VHREF_CTRL 0x00A0
+#define REG_PXCNT_PR 0x00A2
+#define REG_PXCNT_NPIX 0x00A4
+#define REG_LCNT_PR 0x00A6
+#define REG_LCNT_NLIN 0x00A8
+#define REG_HREF_S 0x00AA
+#define REG_HREF_E 0x00AC
+#define REG_HS_S 0x00AE
+#define REG_HS_E 0x00B0
+#define REG_VREF_F1_S 0x00B2
+#define REG_VREF_F1_WIDTH 0x00B4
+#define REG_VREF_F2_S 0x00B5
+#define REG_VREF_F2_WIDTH 0x00B7
+#define REG_VS_F1_LINE_S 0x00B8
+#define REG_VS_F1_LINE_WIDTH 0x00BA
+#define REG_VS_F2_LINE_S 0x00BB
+#define REG_VS_F2_LINE_WIDTH 0x00BD
+#define REG_VS_F1_PIX_S 0x00BE
+#define REG_VS_F1_PIX_E 0x00C0
+#define REG_VS_F2_PIX_S 0x00C2
+#define REG_VS_F2_PIX_E 0x00C4
+#define REG_FREF_F1_S 0x00C6
+#define REG_FREF_F2_S 0x00C8
+#define REG_FDW_S 0x00ca
+#define REG_FDW_E 0x00cc
+#define REG_BLK_GY 0x00da
+#define REG_BLK_BU 0x00dc
+#define REG_BLK_RV 0x00de
+#define REG_FILTERS_CTRL 0x00e0
+#define REG_DITHERING_CTRL 0x00E9
+#define REG_OF 0x00EA
+#define REG_PCLK 0x00EB
+#define REG_HS_HREF 0x00EC
+#define REG_VS_VREF 0x00ED
+#define REG_DE_FREF 0x00EE
+#define REG_VP35_32_CTRL 0x00EF
+#define REG_VP31_28_CTRL 0x00F0
+#define REG_VP27_24_CTRL 0x00F1
+#define REG_VP23_20_CTRL 0x00F2
+#define REG_VP19_16_CTRL 0x00F3
+#define REG_VP15_12_CTRL 0x00F4
+#define REG_VP11_08_CTRL 0x00F5
+#define REG_VP07_04_CTRL 0x00F6
+#define REG_VP03_00_CTRL 0x00F7
+#define REG_CURPAGE_00H 0xFF
+
+#define MASK_VPER 0x3fffff
+#define MASK_VHREF 0x3fff
+#define MASK_HPER 0x0fff
+#define MASK_HSWIDTH 0x03ff
+
+/* HPD Detection */
+#define DETECT_UTIL BIT(7) /* utility of HDMI level */
+#define DETECT_HPD BIT(6) /* HPD of HDMI level */
+#define DETECT_5V_SEL BIT(2) /* 5V present on selected input */
+#define DETECT_5V_B BIT(1) /* 5V present on input B */
+#define DETECT_5V_A BIT(0) /* 5V present on input A */
+
+/* Input Select */
+#define INPUT_SEL_RST_FMT BIT(7) /* 1=reset format measurement */
+#define INPUT_SEL_RST_VDP BIT(2) /* 1=reset video data path */
+#define INPUT_SEL_OUT_MODE BIT(1) /* 0=loop 1=bypass */
+#define INPUT_SEL_B BIT(0) /* 0=inputA 1=inputB */
+
+/* Service Mode */
+#define SVC_MODE_CLK2_MASK 0xc0
+#define SVC_MODE_CLK2_SHIFT 6
+#define SVC_MODE_CLK2_XTL 0L
+#define SVC_MODE_CLK2_XTLDIV2 1L
+#define SVC_MODE_CLK2_HDMIX2 3L
+#define SVC_MODE_CLK1_MASK 0x30
+#define SVC_MODE_CLK1_SHIFT 4
+#define SVC_MODE_CLK1_XTAL 0L
+#define SVC_MODE_CLK1_XTLDIV2 1L
+#define SVC_MODE_CLK1_HDMI 3L
+#define SVC_MODE_RAMP BIT(3) /* 0=colorbar 1=ramp */
+#define SVC_MODE_PAL BIT(2) /* 0=NTSC(480i/p) 1=PAL(576i/p) */
+#define SVC_MODE_INT_PROG BIT(1) /* 0=interlaced 1=progressive */
+#define SVC_MODE_SM_ON BIT(0) /* Enable color bars and tone gen */
+
+/* HDP Manual Control */
+#define HPD_MAN_CTRL_HPD_PULSE BIT(7) /* HPD Pulse low 110ms */
+#define HPD_MAN_CTRL_5VEN BIT(2) /* Output 5V */
+#define HPD_MAN_CTRL_HPD_B BIT(1) /* Assert HPD High for Input A */
+#define HPD_MAN_CTRL_HPD_A BIT(0) /* Assert HPD High for Input A */
+
+/* RT_MAN_CTRL */
+#define RT_MAN_CTRL_RT_AUTO BIT(7)
+#define RT_MAN_CTRL_RT BIT(6)
+#define RT_MAN_CTRL_RT_B BIT(1) /* enable TMDS pull-up on Input B */
+#define RT_MAN_CTRL_RT_A BIT(0) /* enable TMDS pull-up on Input A */
+
+/* VDP_CTRL */
+#define VDP_CTRL_COMPDEL_BP BIT(5) /* bypass compdel */
+#define VDP_CTRL_FORMATTER_BP BIT(4) /* bypass formatter */
+#define VDP_CTRL_PREFILTER_BP BIT(1) /* bypass prefilter */
+#define VDP_CTRL_MATRIX_BP BIT(0) /* bypass matrix conversion */
+
+/* REG_VHREF_CTRL */
+#define VHREF_INT_DET BIT(7) /* interlace detect: 1=alt 0=frame */
+#define VHREF_VSYNC_MASK 0x60
+#define VHREF_VSYNC_SHIFT 6
+#define VHREF_VSYNC_AUTO 0L
+#define VHREF_VSYNC_FDW 1L
+#define VHREF_VSYNC_EVEN 2L
+#define VHREF_VSYNC_ODD 3L
+#define VHREF_STD_DET_MASK 0x18
+#define VHREF_STD_DET_SHIFT 3
+#define VHREF_STD_DET_PAL 0L
+#define VHREF_STD_DET_NTSC 1L
+#define VHREF_STD_DET_AUTO 2L
+#define VHREF_STD_DET_OFF 3L
+#define VHREF_VREF_SRC_STD BIT(2) /* 1=from standard 0=manual */
+#define VHREF_HREF_SRC_STD BIT(1) /* 1=from standard 0=manual */
+#define VHREF_HSYNC_SEL_HS BIT(0) /* 1=HS 0=VS */
+
+/* AUDIO_OUT_ENABLE */
+#define AUDIO_OUT_ENABLE_ACLK BIT(5)
+#define AUDIO_OUT_ENABLE_WS BIT(4)
+#define AUDIO_OUT_ENABLE_AP3 BIT(3)
+#define AUDIO_OUT_ENABLE_AP2 BIT(2)
+#define AUDIO_OUT_ENABLE_AP1 BIT(1)
+#define AUDIO_OUT_ENABLE_AP0 BIT(0)
+
+/* Prefilter Control */
+#define FILTERS_CTRL_BU_MASK 0x0c
+#define FILTERS_CTRL_BU_SHIFT 2
+#define FILTERS_CTRL_RV_MASK 0x03
+#define FILTERS_CTRL_RV_SHIFT 0
+#define FILTERS_CTRL_OFF 0L /* off */
+#define FILTERS_CTRL_2TAP 1L /* 2 Taps */
+#define FILTERS_CTRL_7TAP 2L /* 7 Taps */
+#define FILTERS_CTRL_2_7TAP 3L /* 2/7 Taps */
+
+/* PCLK Configuration */
+#define PCLK_DELAY_MASK 0x70
+#define PCLK_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */
+#define PCLK_INV_SHIFT 2
+#define PCLK_SEL_MASK 0x03 /* clock scaler */
+#define PCLK_SEL_SHIFT 0
+#define PCLK_SEL_X1 0L
+#define PCLK_SEL_X2 1L
+#define PCLK_SEL_DIV2 2L
+#define PCLK_SEL_DIV4 3L
+
+/* Pixel Repeater */
+#define PIX_REPEAT_MASK_UP_SEL 0x30
+#define PIX_REPEAT_MASK_REP 0x0f
+#define PIX_REPEAT_SHIFT 4
+#define PIX_REPEAT_CHROMA 1
+
+/* Page 0x01 - HDMI info and packets */
+#define REG_HDMI_FLAGS 0x0100
+#define REG_DEEP_COLOR_MODE 0x0101
+#define REG_AUDIO_FLAGS 0x0108
+#define REG_AUDIO_FREQ 0x0109
+#define REG_ACP_PACKET_TYPE 0x0141
+#define REG_ISRC1_PACKET_TYPE 0x0161
+#define REG_ISRC2_PACKET_TYPE 0x0181
+#define REG_GBD_PACKET_TYPE 0x01a1
+
+/* HDMI_FLAGS */
+#define HDMI_FLAGS_AUDIO BIT(7) /* Audio packet in last videoframe */
+#define HDMI_FLAGS_HDMI BIT(6) /* HDMI detected */
+#define HDMI_FLAGS_EESS BIT(5) /* EESS detected */
+#define HDMI_FLAGS_HDCP BIT(4) /* HDCP detected */
+#define HDMI_FLAGS_AVMUTE BIT(3) /* AVMUTE */
+#define HDMI_FLAGS_AUD_LAYOUT BIT(2) /* Layout status Audio sample packet */
+#define HDMI_FLAGS_AUD_FIFO_OF BIT(1) /* FIFO read/write pointers crossed */
+#define HDMI_FLAGS_AUD_FIFO_LOW BIT(0) /* FIFO read ptr within 2 of write */
+
+/* Page 0x12 - HDMI Extra control and debug */
+#define REG_CLK_CFG 0x1200
+#define REG_CLK_OUT_CFG 0x1201
+#define REG_CFG1 0x1202
+#define REG_CFG2 0x1203
+#define REG_WDL_CFG 0x1210
+#define REG_DELOCK_DELAY 0x1212
+#define REG_PON_OVR_EN 0x12A0
+#define REG_PON_CBIAS 0x12A1
+#define REG_PON_RESCAL 0x12A2
+#define REG_PON_RES 0x12A3
+#define REG_PON_CLK 0x12A4
+#define REG_PON_PLL 0x12A5
+#define REG_PON_EQ 0x12A6
+#define REG_PON_DES 0x12A7
+#define REG_PON_OUT 0x12A8
+#define REG_PON_MUX 0x12A9
+#define REG_MODE_REC_CFG1 0x12F8
+#define REG_MODE_REC_CFG2 0x12F9
+#define REG_MODE_REC_STS 0x12FA
+#define REG_AUDIO_LAYOUT 0x12D0
+
+#define PON_EN 1
+#define PON_DIS 0
+
+/* CLK CFG */
+#define CLK_CFG_INV_OUT_CLK BIT(7)
+#define CLK_CFG_INV_BUS_CLK BIT(6)
+#define CLK_CFG_SEL_ACLK_EN BIT(1)
+#define CLK_CFG_SEL_ACLK BIT(0)
+#define CLK_CFG_DIS 0
+
+/* Page 0x13 - HDMI Extra control and debug */
+#define REG_DEEP_COLOR_CTRL 0x1300
+#define REG_CGU_DBG_SEL 0x1305
+#define REG_HDCP_DDC_ADDR 0x1310
+#define REG_HDCP_KIDX 0x1316
+#define REG_DEEP_PLL7_BYP 0x1347
+#define REG_HDCP_DE_CTRL 0x1370
+#define REG_HDCP_EP_FILT_CTRL 0x1371
+#define REG_HDMI_CTRL 0x1377
+#define REG_HMTP_CTRL 0x137a
+#define REG_TIMER_D 0x13CF
+#define REG_SUS_SET_RGB0 0x13E1
+#define REG_SUS_SET_RGB1 0x13E2
+#define REG_SUS_SET_RGB2 0x13E3
+#define REG_SUS_SET_RGB3 0x13E4
+#define REG_SUS_SET_RGB4 0x13E5
+#define REG_MAN_SUS_HDMI_SEL 0x13E8
+#define REG_MAN_HDMI_SET 0x13E9
+#define REG_SUS_CLOCK_GOOD 0x13EF
+
+/* HDCP DE Control */
+#define HDCP_DE_MODE_MASK 0xc0 /* DE Measurement mode */
+#define HDCP_DE_MODE_SHIFT 6
+#define HDCP_DE_REGEN_EN BIT(5) /* enable regen mode */
+#define HDCP_DE_FILTER_MASK 0x18 /* DE filter sensitivity */
+#define HDCP_DE_FILTER_SHIFT 3
+#define HDCP_DE_COMP_MASK 0x07 /* DE Composition mode */
+#define HDCP_DE_COMP_MIXED 6L
+#define HDCP_DE_COMP_OR 5L
+#define HDCP_DE_COMP_AND 4L
+#define HDCP_DE_COMP_CH3 3L
+#define HDCP_DE_COMP_CH2 2L
+#define HDCP_DE_COMP_CH1 1L
+#define HDCP_DE_COMP_CH0 0L
+
+/* HDCP EP Filter Control */
+#define HDCP_EP_FIL_CTL_MASK 0x30
+#define HDCP_EP_FIL_CTL_SHIFT 4
+#define HDCP_EP_FIL_VS_MASK 0x0c
+#define HDCP_EP_FIL_VS_SHIFT 2
+#define HDCP_EP_FIL_HS_MASK 0x03
+#define HDCP_EP_FIL_HS_SHIFT 0
+
+/* HDMI_CTRL */
+#define HDMI_CTRL_MUTE_MASK 0x0c
+#define HDMI_CTRL_MUTE_SHIFT 2
+#define HDMI_CTRL_MUTE_AUTO 0L
+#define HDMI_CTRL_MUTE_OFF 1L
+#define HDMI_CTRL_MUTE_ON 2L
+#define HDMI_CTRL_HDCP_MASK 0x03
+#define HDMI_CTRL_HDCP_SHIFT 0
+#define HDMI_CTRL_HDCP_EESS 2L
+#define HDMI_CTRL_HDCP_OESS 1L
+#define HDMI_CTRL_HDCP_AUTO 0L
+
+/* CGU_DBG_SEL bits */
+#define CGU_DBG_CLK_SEL_MASK 0x18
+#define CGU_DBG_CLK_SEL_SHIFT 3
+#define CGU_DBG_XO_FRO_SEL BIT(2)
+#define CGU_DBG_VDP_CLK_SEL BIT(1)
+#define CGU_DBG_PIX_CLK_SEL BIT(0)
+
+/* REG_MAN_SUS_HDMI_SEL / REG_MAN_HDMI_SET bits */
+#define MAN_DIS_OUT_BUF BIT(7)
+#define MAN_DIS_ANA_PATH BIT(6)
+#define MAN_DIS_HDCP BIT(5)
+#define MAN_DIS_TMDS_ENC BIT(4)
+#define MAN_DIS_TMDS_FLOW BIT(3)
+#define MAN_RST_HDCP BIT(2)
+#define MAN_RST_TMDS_ENC BIT(1)
+#define MAN_RST_TMDS_FLOW BIT(0)
+
+/* Page 0x14 - Audio Extra control and debug */
+#define REG_FIFO_LATENCY_VAL 0x1403
+#define REG_AUDIO_CLOCK 0x1411
+#define REG_TEST_NCTS_CTRL 0x1415
+#define REG_TEST_AUDIO_FREQ 0x1426
+#define REG_TEST_MODE 0x1437
+
+/* Audio Clock Configuration */
+#define AUDIO_CLOCK_PLL_PD BIT(7) /* powerdown PLL */
+#define AUDIO_CLOCK_SEL_MASK 0x7f
+#define AUDIO_CLOCK_SEL_16FS 0L /* 16*fs */
+#define AUDIO_CLOCK_SEL_32FS 1L /* 32*fs */
+#define AUDIO_CLOCK_SEL_64FS 2L /* 64*fs */
+#define AUDIO_CLOCK_SEL_128FS 3L /* 128*fs */
+#define AUDIO_CLOCK_SEL_256FS 4L /* 256*fs */
+#define AUDIO_CLOCK_SEL_512FS 5L /* 512*fs */
+
+/* Page 0x20: EDID and Hotplug Detect */
+#define REG_EDID_IN_BYTE0 0x2000 /* EDID base */
+#define REG_EDID_IN_VERSION 0x2080
+#define REG_EDID_ENABLE 0x2081
+#define REG_HPD_POWER 0x2084
+#define REG_HPD_AUTO_CTRL 0x2085
+#define REG_HPD_DURATION 0x2086
+#define REG_RX_HPD_HEAC 0x2087
+
+/* EDID_ENABLE */
+#define EDID_ENABLE_NACK_OFF BIT(7)
+#define EDID_ENABLE_EDID_ONLY BIT(6)
+#define EDID_ENABLE_B_EN BIT(1)
+#define EDID_ENABLE_A_EN BIT(0)
+
+/* HPD Power */
+#define HPD_POWER_BP_MASK 0x0c
+#define HPD_POWER_BP_SHIFT 2
+#define HPD_POWER_BP_LOW 0L
+#define HPD_POWER_BP_HIGH 1L
+#define HPD_POWER_EDID_ONLY BIT(1)
+
+/* HPD Auto control */
+#define HPD_AUTO_READ_EDID BIT(7)
+#define HPD_AUTO_HPD_F3TECH BIT(5)
+#define HPD_AUTO_HP_OTHER BIT(4)
+#define HPD_AUTO_HPD_UNSEL BIT(3)
+#define HPD_AUTO_HPD_ALL_CH BIT(2)
+#define HPD_AUTO_HPD_PRV_CH BIT(1)
+#define HPD_AUTO_HPD_NEW_CH BIT(0)
+
+/* Page 0x21 - EDID content */
+#define REG_EDID_IN_BYTE128 0x2100 /* CEA Extension block */
+#define REG_EDID_IN_SPA_SUB 0x2180
+#define REG_EDID_IN_SPA_AB_A 0x2181
+#define REG_EDID_IN_SPA_CD_A 0x2182
+#define REG_EDID_IN_CKSUM_A 0x2183
+#define REG_EDID_IN_SPA_AB_B 0x2184
+#define REG_EDID_IN_SPA_CD_B 0x2185
+#define REG_EDID_IN_CKSUM_B 0x2186
+
+/* Page 0x30 - NV Configuration */
+#define REG_RT_AUTO_CTRL 0x3000
+#define REG_EQ_MAN_CTRL0 0x3001
+#define REG_EQ_MAN_CTRL1 0x3002
+#define REG_OUTPUT_CFG 0x3003
+#define REG_MUTE_CTRL 0x3004
+#define REG_SLAVE_ADDR 0x3005
+#define REG_CMTP_REG6 0x3006
+#define REG_CMTP_REG7 0x3007
+#define REG_CMTP_REG8 0x3008
+#define REG_CMTP_REG9 0x3009
+#define REG_CMTP_REGA 0x300A
+#define REG_CMTP_REGB 0x300B
+#define REG_CMTP_REGC 0x300C
+#define REG_CMTP_REGD 0x300D
+#define REG_CMTP_REGE 0x300E
+#define REG_CMTP_REGF 0x300F
+#define REG_CMTP_REG10 0x3010
+#define REG_CMTP_REG11 0x3011
+
+/* Page 0x80 - CEC */
+#define REG_PWR_CONTROL 0x80F4
+#define REG_OSC_DIVIDER 0x80F5
+#define REG_EN_OSC_PERIOD_LSB 0x80F8
+#define REG_CONTROL 0x80FF
+
+/* global interrupt flags (INT_FLG_CRL_TOP) */
+#define INTERRUPT_AFE BIT(7) /* AFE module */
+#define INTERRUPT_HDCP BIT(6) /* HDCP module */
+#define INTERRUPT_AUDIO BIT(5) /* Audio module */
+#define INTERRUPT_INFO BIT(4) /* Infoframe module */
+#define INTERRUPT_MODE BIT(3) /* HDMI mode module */
+#define INTERRUPT_RATE BIT(2) /* rate module */
+#define INTERRUPT_DDC BIT(1) /* DDC module */
+#define INTERRUPT_SUS BIT(0) /* SUS module */
+
+/* INT_FLG_CLR_HDCP bits */
+#define MASK_HDCP_MTP BIT(7) /* HDCP MTP busy */
+#define MASK_HDCP_DLMTP BIT(4) /* HDCP end download MTP to SRAM */
+#define MASK_HDCP_DLRAM BIT(3) /* HDCP end download keys from SRAM */
+#define MASK_HDCP_ENC BIT(2) /* HDCP ENC */
+#define MASK_STATE_C5 BIT(1) /* HDCP State C5 reached */
+#define MASK_AKSV BIT(0) /* AKSV received (start of auth) */
+
+/* INT_FLG_CLR_RATE bits */
+#define MASK_RATE_B_DRIFT BIT(7) /* Rate measurement drifted */
+#define MASK_RATE_B_ST BIT(6) /* Rate measurement stability change */
+#define MASK_RATE_B_ACT BIT(5) /* Rate measurement activity change */
+#define MASK_RATE_B_PST BIT(4) /* Rate measreument presence change */
+#define MASK_RATE_A_DRIFT BIT(3) /* Rate measurement drifted */
+#define MASK_RATE_A_ST BIT(2) /* Rate measurement stability change */
+#define MASK_RATE_A_ACT BIT(1) /* Rate measurement presence change */
+#define MASK_RATE_A_PST BIT(0) /* Rate measreument presence change */
+
+/* INT_FLG_CLR_SUS (Start Up Sequencer) bits */
+#define MASK_MPT BIT(7) /* Config MTP end of process */
+#define MASK_FMT BIT(5) /* Video format changed */
+#define MASK_RT_PULSE BIT(4) /* End of termination resistance pulse */
+#define MASK_SUS_END BIT(3) /* SUS last state reached */
+#define MASK_SUS_ACT BIT(2) /* Activity of selected input changed */
+#define MASK_SUS_CH BIT(1) /* Selected input changed */
+#define MASK_SUS_ST BIT(0) /* SUS state changed */
+
+/* INT_FLG_CLR_DDC bits */
+#define MASK_EDID_MTP BIT(7) /* EDID MTP end of process */
+#define MASK_DDC_ERR BIT(6) /* master DDC error */
+#define MASK_DDC_CMD_DONE BIT(5) /* master DDC cmd send correct */
+#define MASK_READ_DONE BIT(4) /* End of down EDID read */
+#define MASK_RX_DDC_SW BIT(3) /* Output DDC switching finished */
+#define MASK_HDCP_DDC_SW BIT(2) /* HDCP DDC switching finished */
+#define MASK_HDP_PULSE_END BIT(1) /* End of Hot Plug Detect pulse */
+#define MASK_DET_5V BIT(0) /* Detection of +5V */
+
+/* INT_FLG_CLR_MODE bits */
+#define MASK_HDMI_FLG BIT(7) /* HDMI mode/avmute/encrypt/FIFO fail */
+#define MASK_GAMUT BIT(6) /* Gamut packet */
+#define MASK_ISRC2 BIT(5) /* ISRC2 packet */
+#define MASK_ISRC1 BIT(4) /* ISRC1 packet */
+#define MASK_ACP BIT(3) /* Audio Content Protection packet */
+#define MASK_DC_NO_GCP BIT(2) /* GCP not received in 5 frames */
+#define MASK_DC_PHASE BIT(1) /* deepcolor pixel phase needs update */
+#define MASK_DC_MODE BIT(0) /* deepcolor color depth changed */
+
+/* INT_FLG_CLR_INFO bits (Infoframe Change Status) */
+#define MASK_MPS_IF BIT(6) /* MPEG Source Product */
+#define MASK_AUD_IF BIT(5) /* Audio */
+#define MASK_SPD_IF BIT(4) /* Source Product Descriptor */
+#define MASK_AVI_IF BIT(3) /* Auxiliary Video IF */
+#define MASK_VS_IF_OTHER_BK2 BIT(2) /* Vendor Specific (bank2) */
+#define MASK_VS_IF_OTHER_BK1 BIT(1) /* Vendor Specific (bank1) */
+#define MASK_VS_IF_HDMI BIT(0) /* Vendor Specific (w/ HDMI LLC code) */
+
+/* INT_FLG_CLR_AUDIO bits */
+#define MASK_AUDIO_FREQ_FLG BIT(5) /* Audio freq change */
+#define MASK_AUDIO_FLG BIT(4) /* DST, OBA, HBR, ASP change */
+#define MASK_MUTE_FLG BIT(3) /* Audio Mute */
+#define MASK_CH_STATE BIT(2) /* Channel status */
+#define MASK_UNMUTE_FIFO BIT(1) /* Audio Unmute */
+#define MASK_ERROR_FIFO_PT BIT(0) /* Audio FIFO pointer error */
+
+/* INT_FLG_CLR_AFE bits */
+#define MASK_AFE_WDL_UNLOCKED BIT(7) /* Wordlocker was unlocked */
+#define MASK_AFE_GAIN_DONE BIT(6) /* Gain calibration done */
+#define MASK_AFE_OFFSET_DONE BIT(5) /* Offset calibration done */
+#define MASK_AFE_ACTIVITY_DET BIT(4) /* Activity detected on data */
+#define MASK_AFE_PLL_LOCK BIT(3) /* TMDS PLL is locked */
+#define MASK_AFE_TRMCAL_DONE BIT(2) /* Termination calibration done */
+#define MASK_AFE_ASU_STATE BIT(1) /* ASU state is reached */
+#define MASK_AFE_ASU_READY BIT(0) /* AFE calibration done: TMDS ready */
+
+/* Audio Output */
+#define AUDCFG_CLK_INVERT BIT(7) /* invert A_CLK polarity */
+#define AUDCFG_TEST_TONE BIT(6) /* enable test tone generator */
+#define AUDCFG_BUS_SHIFT 5
+#define AUDCFG_BUS_I2S 0L
+#define AUDCFG_BUS_SPDIF 1L
+#define AUDCFG_I2SW_SHIFT 4
+#define AUDCFG_I2SW_16 0L
+#define AUDCFG_I2SW_32 1L
+#define AUDCFG_AUTO_MUTE_EN BIT(3) /* Enable Automatic audio mute */
+#define AUDCFG_HBR_SHIFT 2
+#define AUDCFG_HBR_STRAIGHT 0L /* straight via AP0 */
+#define AUDCFG_HBR_DEMUX 1L /* demuxed via AP0:AP3 */
+#define AUDCFG_TYPE_MASK 0x03
+#define AUDCFG_TYPE_SHIFT 0
+#define AUDCFG_TYPE_DST 3L /* Direct Stream Transfer (DST) */
+#define AUDCFG_TYPE_OBA 2L /* One Bit Audio (OBA) */
+#define AUDCFG_TYPE_HBR 1L /* High Bit Rate (HBR) */
+#define AUDCFG_TYPE_PCM 0L /* Audio samples */
+
+/* Video Formatter */
+#define OF_VP_ENABLE BIT(7) /* VP[35:0]/HS/VS/DE/CLK */
+#define OF_BLK BIT(4) /* blanking codes */
+#define OF_TRC BIT(3) /* timing codes (SAV/EAV) */
+#define OF_FMT_MASK 0x3
+#define OF_FMT_444 0L /* RGB444/YUV444 */
+#define OF_FMT_422_SMPT 1L /* YUV422 semi-planar */
+#define OF_FMT_422_CCIR 2L /* YUV422 CCIR656 */
+
+/* HS/HREF output control */
+#define HS_HREF_DELAY_MASK 0xf0
+#define HS_HREF_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */
+#define HS_HREF_PXQ_SHIFT 3 /* Timing codes from HREF */
+#define HS_HREF_INV_SHIFT 2 /* polarity (1=invert) */
+#define HS_HREF_SEL_MASK 0x03
+#define HS_HREF_SEL_SHIFT 0
+#define HS_HREF_SEL_HS_VHREF 0L /* HS from VHREF */
+#define HS_HREF_SEL_HREF_VHREF 1L /* HREF from VHREF */
+#define HS_HREF_SEL_HREF_HDMI 2L /* HREF from HDMI */
+#define HS_HREF_SEL_NONE 3L /* not generated */
+
+/* VS output control */
+#define VS_VREF_DELAY_MASK 0xf0
+#define VS_VREF_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */
+#define VS_VREF_INV_SHIFT 2 /* polarity (1=invert) */
+#define VS_VREF_SEL_MASK 0x03
+#define VS_VREF_SEL_SHIFT 0
+#define VS_VREF_SEL_VS_VHREF 0L /* VS from VHREF */
+#define VS_VREF_SEL_VREF_VHREF 1L /* VREF from VHREF */
+#define VS_VREF_SEL_VREF_HDMI 2L /* VREF from HDMI */
+#define VS_VREF_SEL_NONE 3L /* not generated */
+
+/* DE/FREF output control */
+#define DE_FREF_DELAY_MASK 0xf0
+#define DE_FREF_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */
+#define DE_FREF_DE_PXQ_SHIFT 3 /* Timing codes from DE */
+#define DE_FREF_INV_SHIFT 2 /* polarity (1=invert) */
+#define DE_FREF_SEL_MASK 0x03
+#define DE_FREF_SEL_SHIFT 0
+#define DE_FREF_SEL_DE_VHREF 0L /* DE from VHREF (HREF and not(VREF) */
+#define DE_FREF_SEL_FREF_VHREF 1L /* FREF from VHREF */
+#define DE_FREF_SEL_FREF_HDMI 2L /* FREF from HDMI */
+#define DE_FREF_SEL_NONE 3L /* not generated */
+
+/* HDMI_SOFT_RST bits */
+#define RESET_DC BIT(7) /* Reset deep color module */
+#define RESET_HDCP BIT(6) /* Reset HDCP module */
+#define RESET_KSV BIT(5) /* Reset KSV-FIFO */
+#define RESET_SCFG BIT(4) /* Reset HDCP and repeater function */
+#define RESET_HCFG BIT(3) /* Reset HDCP DDC part */
+#define RESET_PA BIT(2) /* Reset polarity adjust */
+#define RESET_EP BIT(1) /* Reset Error protection */
+#define RESET_TMDS BIT(0) /* Reset TMDS (calib, encoding, flow) */
+
+/* HDMI_INFO_RST bits */
+#define NACK_HDCP BIT(7) /* No ACK on HDCP request */
+#define RESET_FIFO BIT(4) /* Reset Audio FIFO control */
+#define RESET_GAMUT BIT(3) /* Clear Gamut packet */
+#define RESET_AI BIT(2) /* Clear ACP and ISRC packets */
+#define RESET_IF BIT(1) /* Clear all Audio infoframe packets */
+#define RESET_AUDIO BIT(0) /* Reset Audio FIFO control */
+
+/* HDCP_BCAPS bits */
+#define HDCP_HDMI BIT(7) /* HDCP suports HDMI (vs DVI only) */
+#define HDCP_REPEATER BIT(6) /* HDCP supports repeater function */
+#define HDCP_READY BIT(5) /* set by repeater function */
+#define HDCP_FAST BIT(4) /* Up to 400kHz */
+#define HDCP_11 BIT(1) /* HDCP 1.1 supported */
+#define HDCP_FAST_REAUTH BIT(0) /* fast reauthentication supported */
+
+/* Audio output formatter */
+#define AUDIO_LAYOUT_SP_FLAG BIT(2) /* sp flag used by FIFO */
+#define AUDIO_LAYOUT_MANUAL BIT(1) /* manual layout (vs per pkt) */
+#define AUDIO_LAYOUT_LAYOUT1 BIT(0) /* Layout1: AP0-3 vs Layout0:AP0 */
+
+/* masks for interrupt status registers */
+#define MASK_SUS_STATUS 0x1F
+#define LAST_STATE_REACHED 0x1B
+#define MASK_CLK_STABLE 0x04
+#define MASK_CLK_ACTIVE 0x02
+#define MASK_SUS_STATE 0x10
+#define MASK_SR_FIFO_FIFO_CTRL 0x30
+#define MASK_AUDIO_FLAG 0x10
+
+/* Rate measurement */
+#define RATE_REFTIM_ENABLE 0x01
+#define CLK_MIN_RATE 0x0057e4
+#define CLK_MAX_RATE 0x0395f8
+#define WDL_CFG_VAL 0x82
+#define DC_FILTER_VAL 0x31
+
+/* Infoframe */
+#define VS_HDMI_IF_UPDATE 0x0200
+#define VS_HDMI_IF 0x0201
+#define VS_BK1_IF_UPDATE 0x0220
+#define VS_BK1_IF 0x0221
+#define VS_BK2_IF_UPDATE 0x0240
+#define VS_BK2_IF 0x0241
+#define AVI_IF_UPDATE 0x0260
+#define AVI_IF 0x0261
+#define SPD_IF_UPDATE 0x0280
+#define SPD_IF 0x0281
+#define AUD_IF_UPDATE 0x02a0
+#define AUD_IF 0x02a1
+#define MPS_IF_UPDATE 0x02c0
+#define MPS_IF 0x02c1
diff --git a/include/media/i2c/tda1997x.h b/include/media/i2c/tda1997x.h
new file mode 100644
index 0000000..c6c2a8a
--- /dev/null
+++ b/include/media/i2c/tda1997x.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * tda1997x - NXP HDMI receiver
+ *
+ * Copyright 2017 Tim Harvey <tharvey at gateworks.com>
+ *
+ */
+
+#ifndef _TDA1997X_
+#define _TDA1997X_
+
+/* Platform Data */
+struct tda1997x_platform_data {
+ enum v4l2_mbus_type vidout_bus_type;
+ u32 vidout_bus_width;
+ u8 vidout_port_cfg[9];
+ /* pin polarity (1=invert) */
+ bool vidout_inv_de;
+ bool vidout_inv_hs;
+ bool vidout_inv_vs;
+ bool vidout_inv_pclk;
+ /* clock delays (0=-8, 1=-7 ... 15=+7 pixels) */
+ u8 vidout_delay_hs;
+ u8 vidout_delay_vs;
+ u8 vidout_delay_de;
+ u8 vidout_delay_pclk;
+ /* sync selections (controls how sync pins are derived) */
+ u8 vidout_sel_hs;
+ u8 vidout_sel_vs;
+ u8 vidout_sel_de;
+
+ /* Audio Port Output */
+ int audout_format;
+ u32 audout_mclk_fs; /* clock multiplier */
+ u32 audout_width; /* 13 or 32 bit */
+ u32 audout_layout; /* layout0=AP0 layout1=AP0,AP1,AP2,AP3 */
+ bool audout_layoutauto; /* audio layout dictated by pkt header */
+ bool audout_invert_clk; /* data valid on rising edge of BCLK */
+ bool audio_auto_mute; /* enable hardware audio auto-mute */
+};
+
+#endif
--
2.7.4
More information about the Alsa-devel
mailing list