[alsa-devel] [PATCH v8 0/7] TDA1997x HDMI video reciver
Tim Harvey
tharvey at gateworks.com
Wed Feb 7 00:29:09 CET 2018
On Tue, Feb 6, 2018 at 1:21 PM, Hans Verkuil <hverkuil at xs4all.nl> wrote:
> On 02/06/2018 09:27 PM, Tim Harvey wrote:
>
> <snip>
>
>> v4l2-compliance test results:
>> - with the following kernel patches:
>> v4l2-subdev: clear reserved fields
>> . v4l2-subdev: without controls return -ENOTTY
>>
>> v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8
>> Media Driver Info:
>> Driver name : imx-media
>> Model : imx-media
>> Serial :
>> Bus info :
>> Media version : 4.15.0
>> Hardware revision: 0x00000000 (0)
>> Driver version : 4.15.0
>> Interface Info:
>> ID : 0x0300008f
>> Type : V4L Sub-Device
>> Entity Info:
>> ID : 0x00000003 (3)
>> Name : tda19971 2-0048
>> Function : Unknown
>
> This is missing. It should be one of these:
>
> https://hverkuil.home.xs4all.nl/spec/uapi/mediactl/media-types.html#media-entity-type
>
> However, we don't have a proper function defined.
>
> I would suggest adding a new MEDIA_ENT_F_DTV_DECODER analogous to MEDIA_ENT_F_ATV_DECODER.
>
> It would be a new patch adding this + documentation.
Hows this look for adding to my next series:
Author: Tim Harvey <tharvey at gateworks.com>
Date: Tue Feb 6 14:12:52 2018 -0800
[media] add digital video decoder video interface entity functions
Add a new media entity function definition for digital TV decoders:
MEDIA_ENT_F_DTV_DECODER
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
--- a/Documentation/media/uapi/mediactl/media-types.rst
+++ b/Documentation/media/uapi/mediactl/media-types.rst
@@ -321,6 +321,17 @@ Types and flags used to represent the media graph elements
MIPI CSI-2, ...), and outputs them on its source pad to an output
video bus of another type (eDP, MIPI CSI-2, parallel, ...).
+ - .. row 31
+
+ .. _MEDIA-ENT-F-DTV-DECODER:
+
+ - ``MEDIA_ENT_F_DTV_DECODER``
+
+ - Digital video decoder. The basic function of the video decoder is
+ to accept digital video from a wide variety of sources
+ and output it in some digital video standard, with appropriate
+ timing signals.
+
.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
.. _media-entity-flag:
diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h
index b9b9446..6653e88 100644
--- a/include/uapi/linux/media.h
+++ b/include/uapi/linux/media.h
@@ -152,6 +152,7 @@ struct media_device_info {
* MEDIA_ENT_F_IF_VID_DECODER and/or MEDIA_ENT_F_IF_AUD_DECODER.
*/
#define MEDIA_ENT_F_TUNER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 5)
+#define MEDIA_ENT_F_DTV_DECODER
(MEDIA_ENT_F_OLD_SUBDEV_BASE + 6)
#define MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN MEDIA_ENT_F_OLD_SUBDEV_BASE
Assigning this now shows a function but does not resolve the media
compliance results:
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -2586,6 +2586,7 @@ static int tda1997x_probe(struct i2c_client *client,
id->name, i2c_adapter_id(client->adapter),
client->addr);
sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+ sd->entity.function = MEDIA_ENT_F_DTV_DECODER;
sd->entity.ops = &tda1997x_media_ops;
/* set allowed mbus modes based on chip, bus-type, and bus-width */
root at ventana:~# v4l2-compliance -u1
v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8
Media Driver Info:
Driver name : imx-media
Model : imx-media
Serial :
Bus info :
Media version : 4.15.0
Hardware revision: 0x00000000 (0)
Driver version : 4.15.0
Interface Info:
ID : 0x0300008f
Type : V4L Sub-Device
Entity Info:
ID : 0x00000003 (3)
Name : tda19971 2-0048
Function : Unknown (00020006)
Pad 0x01000004 : Source
Link 0x0200006f: to remote pad 0x1000063 of entity
'ipu1_csi0_mux': Data
...
root at ventana:~# v4l2-compliance -m0 -M
v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8
Media Driver Info:
Driver name : imx-media
Model : imx-media
Serial :
Bus info :
Media version : 4.15.0
Hardware revision: 0x00000000 (0)
Driver version : 4.15.0
Compliance test for device /dev/media0:
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
fail: v4l2-test-media.cpp(141): ent.function ==
MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(256):
v2_entities_set.find(ent.id) == v2_entities_set.end()
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
test MEDIA_IOC_SETUP_LINK: OK
Total: 7, Succeeded: 5, Failed: 2, Warnings: 0
>
<snip>
>>
>> Sub-Device ioctls (Source Pad 0):
>> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
>> test Try VIDIOC_SUBDEV_G/S_FMT: OK
>> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
>> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
>> test Active VIDIOC_SUBDEV_G/S_FMT: OK
>> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
>> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>>
>> Control ioctls:
>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>> test VIDIOC_QUERYCTRL: OK (Not Supported)
>> test VIDIOC_G/S_CTRL: OK (Not Supported)
>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>> Standard Controls: 0 Private Controls: 0
>
> Why doesn't this show anything? You have at least one control, so this should
> reflect that. Does 'v4l2-ctl -d /dev/v4l-subdev1 -l' show any controls?
>
> I think sd->ctrl_handler is never set to the v4l2_ctrl_handler pointer.
>
> Have you ever tested the controls?
>
> Looking closer I also notice that the control handler is never freed. Or
> checked for errors when it is created in the probe function. Hmm, I should
> have caught that earlier.
>
Yes thanks - I missed this also:
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -2726,6 +2726,12 @@ static int tda1997x_probe(struct i2c_client *client,
&tda1997x_ctrl_ops,
V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, 0,
V4L2_DV_RGB_RANGE_AUTO);
+ state->sd.ctrl_handler = hdl;
+ if (hdl->error) {
+ ret = hdl->error;
+ goto err_free_handler;
+ }
+ v4l2_ctrl_handler_setup(hdl);
/* initialize source pads */
state->pads[TDA1997X_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
@@ -2774,6 +2780,8 @@ static int tda1997x_probe(struct i2c_client *client,
err_free_media:
media_entity_cleanup(&sd->entity);
+err_free_handler:
+ v4l2_ctrl_handler_free(&state->hdl);
err_free_mutex:
cancel_delayed_work(&state->delayed_work_enable_hpd);
mutex_destroy(&state->page_lock);
@@ -2801,6 +2809,7 @@ static int tda1997x_remove(struct i2c_client *client)
v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(&state->hdl);
regulator_bulk_disable(TDA1997X_NUM_SUPPLIES, state->supplies);
i2c_unregister_device(state->client_cec);
cancel_delayed_work(&state->delayed_work_enable_hpd);
root at ventana:~# v4l2-ctl -d /dev/v4l-subdev1 --list-ctrls
Digital Video Controls
power_present 0x00a00964 (bitmask): max=0x00000001
default=0x00000000 value=0x00000000 flags=read-only
rx_rgb_quantization_range 0x00a00965 (menu) : min=0 max=2
default=0 value=2
rx_it_content_type 0x00a00966 (menu) : min=0 max=4
default=4 value=0 flags=read-only, volatile
And various sets/gets appear to work as designed (found that I wasn't
updating the csc when quantiation range was changed via ctrl and fixed
it).
Regards,
Tim
More information about the Alsa-devel
mailing list