[alsa-devel] [PATCH v8 5/7] media: i2c: Add TDA1997x HDMI receiver driver

[Tim Harvey]

On Tue, Feb 6, 2018 at 12:38 PM, Hans Verkuil <hverkuil at xs4all.nl> wrote:
> On 02/06/2018 09:27 PM, Tim Harvey wrote:
>> Add support for the TDA1997x HDMI receivers.
>>
>> Cc: Hans Verkuil <hverkuil at xs4all.nl>
>> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
>> ---
>
> <snip>
>
>> +static int tda1997x_get_dv_timings_cap(struct v4l2_subdev *sd,
>> +                                    struct v4l2_dv_timings_cap *cap)
>> +{
>> +     if (cap->pad != TDA1997X_PAD_SOURCE)
>> +             return -EINVAL;
>> +
>> +     *cap = tda1997x_dv_timings_cap;
>> +     return 0;
>> +}
>> +
>> +static int tda1997x_enum_dv_timings(struct v4l2_subdev *sd,
>> +                                 struct v4l2_enum_dv_timings *timings)
>> +{
>> +     if (timings->pad != TDA1997X_PAD_SOURCE)
>> +             return -EINVAL;
>> +
>> +     return v4l2_enum_dv_timings_cap(timings, &tda1997x_dv_timings_cap,
>> +                                     NULL, NULL);
>> +}
>
> You shouldn't need this pad test: it's done in the v4l2-subdev.c core code
> already. But please double-check :-)
>

oh right - forgot to check that. Yes, v4l2-subdev.c has pad bounds
checking on all ops I use so I can remove them.

> Can you post the output of the v4l2-compliance test? I'm curious to see it.

it's in the cover letter (should I move it to the driver patch for
subsequent submittals?)

>
> Can you also try to run v4l2-compliance -m /dev/mediaX? That also tests
> whether the right entity types are set (note: testing for that should
> also happen in the subdev compliance test, but I haven't done that yet).
>

root at ventana:~# v4l2-compliance -m0
v4l2-compliance SHA   : b2f8f9049056eb6f9e028927dacb2c715a062df8
Media Driver Info:
        Driver name      : imx-media
        Model            : imx-media
        Serial           :
        Bus info         :
        Media version    : 4.15.0
        Hardware revision: 0x00000000 (0)
        Driver version   : 4.15.0

Compliance test for device /dev/media0:

Required ioctls:
        test MEDIA_IOC_DEVICE_INFO: OK

Allow for multiple opens:
        test second /dev/media0 open: OK
        test MEDIA_IOC_DEVICE_INFO: OK
        test for unlimited opens: OK

Media Controller ioctls:
                fail: v4l2-test-media.cpp(141): ent.function ==
MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
        test MEDIA_IOC_G_TOPOLOGY: FAIL
                fail: v4l2-test-media.cpp(256):
v2_entities_set.find(ent.id) == v2_entities_set.end()
        test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
        test MEDIA_IOC_SETUP_LINK: OK

Total: 7, Succeeded: 5, Failed: 2, Warnings: 0

foiled again!

Is something missing after v4l2_i2c_subdev_init() or is this perhaps
something missing in the imx media drivers?

        v4l2_i2c_subdev_init(sd, client, &tda1997x_subdev_ops);
        snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
                 id->name, i2c_adapter_id(client->adapter),
                 client->addr);
        sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
        sd->entity.ops = &tda1997x_media_ops;

Regards,

Tim