[alsa-devel] [PATCH v3 1/1] ASoC: Intel: kbl_rt5660: Add a new machine driver for kbl with rt5660

Hui Wang hui.wang at canonical.com
Thu Dec 13 14:02:16 CET 2018


The new Dell IoT platform uses kabylake + alc3277 codec, and alc3277
shares the driver with the codec rt5660, here we generate a new
machine driver based on kbl_da7219_max98357a.

The audio design on this IoT platform is as below:
 - Intel kabylake platform
 - connect the codec ALC3277 via SSP0
 - line-out and line-in with Micbias jacks
 - line-out mute control and jack detection of line-out and line-in
 - two HDMI ports with audio capability

Signed-off-by: Hui Wang <hui.wang at canonical.com>
---
 sound/soc/intel/boards/Kconfig                |  10 +
 sound/soc/intel/boards/Makefile               |   2 +
 sound/soc/intel/boards/kbl_rt5660.c           | 543 ++++++++++++++++++
 .../intel/common/soc-acpi-intel-kbl-match.c   |  10 +
 4 files changed, 565 insertions(+)
 create mode 100644 sound/soc/intel/boards/kbl_rt5660.c

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index b177db2a0dbb..3839d6205fcf 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -293,6 +293,16 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH
 	  Say Y if you have such a device.
 	  If unsure select "N".
 
+config SND_SOC_INTEL_KBL_RT5660_MACH
+	tristate "KBL with RT5660 in I2S Mode"
+	depends on MFD_INTEL_LPSS && I2C && ACPI
+	select SND_SOC_RT5660
+	select SND_SOC_HDAC_HDMI
+	help
+	  This adds support for ASoC Onboard Codec I2S machine driver. This will
+	  create an alsa sound card for RT5660 I2S audio codec.
+	  Say Y if you have such a device.
+
 config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
 	tristate "GLK with RT5682 and MAX98357A in I2S Mode"
 	depends on MFD_INTEL_LPSS && I2C && ACPI
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 5381e27df9cc..bf072ea299b7 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -20,6 +20,7 @@ snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
 snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o
 snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o
 snd-soc-kbl_rt5663_rt5514_max98927-objs := kbl_rt5663_rt5514_max98927.o
+snd-soc-kbl_rt5660-objs := kbl_rt5660.o
 snd-soc-skl_rt286-objs := skl_rt286.o
 snd-soc-skl_hda_dsp-objs := skl_hda_dsp_generic.o skl_hda_dsp_common.o
 snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH) += snd-soc-kbl_da7219_max9
 obj-$(CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH) += snd-soc-kbl_da7219_max98927.o
 obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH) += snd-soc-kbl_rt5663_max98927.o
 obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH) += snd-soc-kbl_rt5663_rt5514_max98927.o
+obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH) += snd-soc-kbl_rt5660.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o
 obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o
diff --git a/sound/soc/intel/boards/kbl_rt5660.c b/sound/soc/intel/boards/kbl_rt5660.c
new file mode 100644
index 000000000000..3255e0029276
--- /dev/null
+++ b/sound/soc/intel/boards/kbl_rt5660.c
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright(c) 2018-19 Canonical Corporation.
+
+/*
+ * Intel Kabylake I2S Machine Driver with RT5660 Codec
+ *
+ * Modified from:
+ *   Intel Kabylake I2S Machine driver supporting MAXIM98357a and
+ *   DA7219 codecs
+ * Also referred to:
+ *   Intel Broadwell I2S Machine driver supporting RT5677 codec
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "../../codecs/hdac_hdmi.h"
+#include "../../codecs/rt5660.h"
+
+#define KBL_RT5660_CODEC_DAI "rt5660-aif1"
+#define DUAL_CHANNEL 2
+
+static struct snd_soc_card *kabylake_audio_card;
+static struct snd_soc_jack skylake_hdmi[3];
+static struct snd_soc_jack lineout_jack;
+static struct snd_soc_jack mic_jack;
+
+struct kbl_hdmi_pcm {
+	struct list_head head;
+	struct snd_soc_dai *codec_dai;
+	int device;
+};
+
+struct kbl_codec_private {
+	struct gpio_desc *gpio_lo_mute;
+	struct list_head hdmi_pcm_list;
+};
+
+enum {
+	KBL_DPCM_AUDIO_PB = 0,
+	KBL_DPCM_AUDIO_CP,
+	KBL_DPCM_AUDIO_HDMI1_PB,
+	KBL_DPCM_AUDIO_HDMI2_PB,
+	KBL_DPCM_AUDIO_HDMI3_PB,
+};
+
+#define GPIO_LINEOUT_MUTE_INDEX 0
+#define GPIO_LINEOUT_DET_INDEX 3
+#define GPIO_LINEIN_DET_INDEX 4
+
+static const struct acpi_gpio_params lineout_mute_gpio = { GPIO_LINEOUT_MUTE_INDEX, 0, true };
+static const struct acpi_gpio_params lineout_det_gpio = { GPIO_LINEOUT_DET_INDEX, 0, false };
+static const struct acpi_gpio_params mic_det_gpio = { GPIO_LINEIN_DET_INDEX, 0, false };
+
+
+static const struct acpi_gpio_mapping acpi_rt5660_gpios[] = {
+	{ "lineout-mute-gpios", &lineout_mute_gpio, 1 },
+	{ "lineout-det-gpios", &lineout_det_gpio, 1 },
+	{ "mic-det-gpios", &mic_det_gpio, 1 },
+	{ NULL },
+};
+
+static struct snd_soc_jack_pin lineout_jack_pin = {
+	.pin	= "Line Out",
+	.mask	= SND_JACK_LINEOUT,
+};
+
+static struct snd_soc_jack_pin mic_jack_pin = {
+	.pin	= "Line In",
+	.mask	= SND_JACK_MICROPHONE,
+};
+
+static struct snd_soc_jack_gpio lineout_jack_gpio = {
+	.name			= "lineout-det",
+	.report			= SND_JACK_LINEOUT,
+	.debounce_time		= 200,
+};
+
+static struct snd_soc_jack_gpio mic_jack_gpio = {
+	.name			= "mic-det",
+	.report			= SND_JACK_MICROPHONE,
+	.debounce_time		= 200,
+};
+
+static int kabylake_5660_event_lineout(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct kbl_codec_private *priv = snd_soc_card_get_drvdata(dapm->card);
+
+	gpiod_set_value_cansleep(priv->gpio_lo_mute,
+			!(SND_SOC_DAPM_EVENT_ON(event)));
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new kabylake_rt5660_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Line In"),
+	SOC_DAPM_PIN_SWITCH("Line Out"),
+};
+
+static const struct snd_soc_dapm_widget kabylake_rt5660_widgets[] = {
+	SND_SOC_DAPM_MIC("Line In", NULL),
+	SND_SOC_DAPM_LINE("Line Out", kabylake_5660_event_lineout),
+};
+
+static const struct snd_soc_dapm_route kabylake_rt5660_map[] = {
+	/* other jacks */
+	{"IN1P", NULL, "Line In"},
+	{"IN2P", NULL, "Line In"},
+	{"Line Out", NULL, "LOUTR"},
+	{"Line Out", NULL, "LOUTL"},
+
+	/* CODEC BE connections */
+	{ "AIF1 Playback", NULL, "ssp0 Tx"},
+	{ "ssp0 Tx", NULL, "codec0_out"},
+
+	{ "codec0_in", NULL, "ssp0 Rx" },
+	{ "ssp0 Rx", NULL, "AIF1 Capture" },
+
+	{ "hifi1", NULL, "iDisp1 Tx"},
+	{ "iDisp1 Tx", NULL, "iDisp1_out"},
+	{ "hifi2", NULL, "iDisp2 Tx"},
+	{ "iDisp2 Tx", NULL, "iDisp2_out"},
+	{ "hifi3", NULL, "iDisp3 Tx"},
+	{ "iDisp3 Tx", NULL, "iDisp3_out"},
+};
+
+static int kabylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+
+	/* The ADSP will convert the FE rate to 48k, stereo */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = DUAL_CHANNEL;
+
+	/* set SSP0 to 24 bit */
+	snd_mask_none(fmt);
+	snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
+
+	return 0;
+}
+
+static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+	int ret;
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_component *component = rtd->codec_dai->component;
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+	ret = devm_acpi_dev_add_driver_gpios(component->dev, acpi_rt5660_gpios);
+	if (ret)
+		dev_warn(component->dev, "Failed to add driver gpios\n");
+
+	/* Request rt5660 GPIO for lineout mute control, return if fails */
+	ctx->gpio_lo_mute = devm_gpiod_get(component->dev, "lineout-mute",
+					   GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->gpio_lo_mute)) {
+		dev_err(component->dev, "Can't find GPIO_MUTE# gpio\n");
+		return PTR_ERR(ctx->gpio_lo_mute);
+	}
+
+	/* Create and initialize headphone jack, this jack is not mandatory, don't return if fails */
+	ret = snd_soc_card_jack_new(rtd->card, "Lineout Jack",
+				    SND_JACK_LINEOUT, &lineout_jack,
+				    &lineout_jack_pin, 1);
+	if (ret)
+		dev_warn(component->dev, "Can't create Lineout jack\n");
+	else {
+		lineout_jack_gpio.gpiod_dev = component->dev;
+		ret = snd_soc_jack_add_gpios(&lineout_jack, 1,
+					     &lineout_jack_gpio);
+		if (ret)
+			dev_warn(component->dev, "Can't add Lineout jack gpio\n");
+	}
+
+	/* Create and initialize mic jack, this jack is not mandatory, don't return if fails */
+	ret = snd_soc_card_jack_new(rtd->card, "Mic Jack",
+				    SND_JACK_MICROPHONE, &mic_jack,
+				    &mic_jack_pin, 1);
+	if (ret)
+		dev_warn(component->dev, "Can't create mic jack\n");
+	else {
+		mic_jack_gpio.gpiod_dev = component->dev;
+		ret = snd_soc_jack_add_gpios(&mic_jack, 1, &mic_jack_gpio);
+		if (ret)
+			dev_warn(component->dev, "Can't add mic jack gpio\n");
+	}
+
+	/* Here we enable some dapms in advance to reduce the pop noise for recording via line-in */
+	snd_soc_dapm_force_enable_pin(dapm, "MICBIAS1");
+	snd_soc_dapm_force_enable_pin(dapm, "BST1");
+	snd_soc_dapm_force_enable_pin(dapm, "BST2");
+
+	return 0;
+}
+
+static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
+{
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct kbl_hdmi_pcm *pcm;
+
+	pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL);
+	if (!pcm)
+		return -ENOMEM;
+
+	pcm->device = device;
+	pcm->codec_dai = dai;
+
+	list_add_tail(&pcm->head, &ctx->hdmi_pcm_list);
+
+	return 0;
+}
+
+static int kabylake_hdmi1_init(struct snd_soc_pcm_runtime *rtd)
+{
+	return kabylake_hdmi_init(rtd, KBL_DPCM_AUDIO_HDMI1_PB);
+}
+
+static int kabylake_hdmi2_init(struct snd_soc_pcm_runtime *rtd)
+{
+	return kabylake_hdmi_init(rtd, KBL_DPCM_AUDIO_HDMI2_PB);
+}
+
+static int kabylake_hdmi3_init(struct snd_soc_pcm_runtime *rtd)
+{
+	return kabylake_hdmi_init(rtd, KBL_DPCM_AUDIO_HDMI3_PB);
+}
+
+static int kabylake_rt5660_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai,
+				     RT5660_SCLK_S_PLL1, params_rate(params) * 512,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_pll(codec_dai, 0,
+				  RT5660_PLL1_S_BCLK,
+				  params_rate(params) * 50,
+				  params_rate(params) * 512);
+	if (ret < 0)
+		dev_err(codec_dai->dev, "can't set codec pll: %d\n", ret);
+
+	return ret;
+}
+
+static struct snd_soc_ops kabylake_rt5660_ops = {
+	.hw_params = kabylake_rt5660_hw_params,
+};
+
+static const unsigned int rates[] = {
+	48000,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list  = rates,
+	.mask = 0,
+};
+
+static const unsigned int channels[] = {
+	DUAL_CHANNEL,
+};
+
+static const struct snd_pcm_hw_constraint_list constraints_channels = {
+	.count = ARRAY_SIZE(channels),
+	.list = channels,
+	.mask = 0,
+};
+
+static int kbl_fe_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	/*
+	 * On this platform for PCM device we support,
+	 * 48Khz
+	 * stereo
+	 * 16 bit audio
+	 */
+
+	runtime->hw.channels_max = DUAL_CHANNEL;
+	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+					   &constraints_channels);
+
+	runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+	snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
+
+	snd_pcm_hw_constraint_list(runtime, 0,
+				SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
+
+	return 0;
+}
+
+static const struct snd_soc_ops kabylake_rt5660_fe_ops = {
+	.startup = kbl_fe_startup,
+};
+
+/* kabylake digital audio interface glue - connects rt5660 codec <--> CPU */
+static struct snd_soc_dai_link kabylake_rt5660_dais[] = {
+	/* Front End DAI links */
+	[KBL_DPCM_AUDIO_PB] = {
+		.name = "Kbl Audio Port",
+		.stream_name = "Audio",
+		.cpu_dai_name = "System Pin",
+		.platform_name = "0000:00:1f.3",
+		.dynamic = 1,
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.nonatomic = 1,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_playback = 1,
+		.ops = &kabylake_rt5660_fe_ops,
+	},
+	[KBL_DPCM_AUDIO_CP] = {
+		.name = "Kbl Audio Capture Port",
+		.stream_name = "Audio Record",
+		.cpu_dai_name = "System Pin",
+		.platform_name = "0000:00:1f.3",
+		.dynamic = 1,
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.nonatomic = 1,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_capture = 1,
+		.ops = &kabylake_rt5660_fe_ops,
+	},
+	[KBL_DPCM_AUDIO_HDMI1_PB] = {
+		.name = "Kbl HDMI Port1",
+		.stream_name = "Hdmi1",
+		.cpu_dai_name = "HDMI1 Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:1f.3",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+	[KBL_DPCM_AUDIO_HDMI2_PB] = {
+		.name = "Kbl HDMI Port2",
+		.stream_name = "Hdmi2",
+		.cpu_dai_name = "HDMI2 Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:1f.3",
+		.dpcm_playback = 1,
+		.init = NULL,
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+	[KBL_DPCM_AUDIO_HDMI3_PB] = {
+		.name = "Kbl HDMI Port3",
+		.stream_name = "Hdmi3",
+		.cpu_dai_name = "HDMI3 Pin",
+		.codec_name = "snd-soc-dummy",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.platform_name = "0000:00:1f.3",
+		.trigger = {
+			SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
+		.dpcm_playback = 1,
+		.init = NULL,
+		.nonatomic = 1,
+		.dynamic = 1,
+	},
+
+	/* Back End DAI links */
+	{
+		/* SSP0 - Codec */
+		.name = "SSP0-Codec",
+		.id = 0,
+		.cpu_dai_name = "SSP0 Pin",
+		.platform_name = "0000:00:1f.3",
+		.no_pcm = 1,
+		.codec_name = "i2c-10EC3277:00",
+		.codec_dai_name = KBL_RT5660_CODEC_DAI,
+		.init = kabylake_rt5660_codec_init,
+		.dai_fmt = SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBS_CFS,
+		.ignore_pmdown_time = 1,
+		.be_hw_params_fixup = kabylake_ssp0_fixup,
+		.ops = &kabylake_rt5660_ops,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+	},
+	{
+		.name = "iDisp1",
+		.id = 1,
+		.cpu_dai_name = "iDisp1 Pin",
+		.codec_name = "ehdaudio0D2",
+		.codec_dai_name = "intel-hdmi-hifi1",
+		.platform_name = "0000:00:1f.3",
+		.dpcm_playback = 1,
+		.init = kabylake_hdmi1_init,
+		.no_pcm = 1,
+	},
+	{
+		.name = "iDisp2",
+		.id = 2,
+		.cpu_dai_name = "iDisp2 Pin",
+		.codec_name = "ehdaudio0D2",
+		.codec_dai_name = "intel-hdmi-hifi2",
+		.platform_name = "0000:00:1f.3",
+		.init = kabylake_hdmi2_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+	},
+	{
+		.name = "iDisp3",
+		.id = 3,
+		.cpu_dai_name = "iDisp3 Pin",
+		.codec_name = "ehdaudio0D2",
+		.codec_dai_name = "intel-hdmi-hifi3",
+		.platform_name = "0000:00:1f.3",
+		.init = kabylake_hdmi3_init,
+		.dpcm_playback = 1,
+		.no_pcm = 1,
+	},
+};
+
+
+#define NAME_SIZE	32
+static int kabylake_card_late_probe(struct snd_soc_card *card)
+{
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(card);
+	struct kbl_hdmi_pcm *pcm;
+	struct snd_soc_component *component = NULL;
+	int err, i = 0;
+	char jack_name[NAME_SIZE];
+
+	list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) {
+		component = pcm->codec_dai->component;
+		snprintf(jack_name, sizeof(jack_name),
+			"HDMI/DP, pcm=%d Jack", pcm->device);
+		err = snd_soc_card_jack_new(card, jack_name,
+					SND_JACK_AVOUT, &skylake_hdmi[i],
+					NULL, 0);
+
+		if (err)
+			return err;
+
+		err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device,
+				&skylake_hdmi[i]);
+		if (err < 0)
+			return err;
+
+		i++;
+
+	}
+
+	if (!component)
+		return -EINVAL;
+
+	return hdac_hdmi_jack_port_init(component, &card->dapm);
+}
+
+/* kabylake audio machine driver for rt5660 */
+static struct snd_soc_card kabylake_audio_card_rt5660 = {
+	.name = "kblrt5660",
+	.owner = THIS_MODULE,
+	.dai_link = kabylake_rt5660_dais,
+	.num_links = ARRAY_SIZE(kabylake_rt5660_dais),
+	.controls = kabylake_rt5660_controls,
+	.num_controls = ARRAY_SIZE(kabylake_rt5660_controls),
+	.dapm_widgets = kabylake_rt5660_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(kabylake_rt5660_widgets),
+	.dapm_routes = kabylake_rt5660_map,
+	.num_dapm_routes = ARRAY_SIZE(kabylake_rt5660_map),
+	.fully_routed = true,
+	.late_probe = kabylake_card_late_probe,
+};
+
+static int kabylake_audio_probe(struct platform_device *pdev)
+{
+	struct kbl_codec_private *ctx;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&ctx->hdmi_pcm_list);
+
+	kabylake_audio_card =
+		(struct snd_soc_card *)pdev->id_entry->driver_data;
+
+	kabylake_audio_card->dev = &pdev->dev;
+	snd_soc_card_set_drvdata(kabylake_audio_card, ctx);
+	return devm_snd_soc_register_card(&pdev->dev, kabylake_audio_card);
+}
+
+static const struct platform_device_id kbl_board_ids[] = {
+	{
+		.name = "kbl_rt5660",
+		.driver_data =
+			(kernel_ulong_t)&kabylake_audio_card_rt5660,
+	},
+	{ }
+};
+
+static struct platform_driver kabylake_audio = {
+	.probe = kabylake_audio_probe,
+	.driver = {
+		.name = "kbl_rt5660",
+		.pm = &snd_soc_pm_ops,
+	},
+	.id_table = kbl_board_ids,
+};
+
+module_platform_driver(kabylake_audio)
+
+/* Module information */
+MODULE_DESCRIPTION("Audio Machine driver-RT5660 in I2S mode");
+MODULE_AUTHOR("Hui Wang <hui.wang at canonical.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:kbl_rt5660");
diff --git a/sound/soc/intel/common/soc-acpi-intel-kbl-match.c b/sound/soc/intel/common/soc-acpi-intel-kbl-match.c
index a317b7790fce..e6fa6f470526 100644
--- a/sound/soc/intel/common/soc-acpi-intel-kbl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-kbl-match.c
@@ -96,6 +96,16 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_kbl_machines[] = {
 		.quirk_data = &kbl_7219_98927_codecs,
 		.pdata = &skl_dmic_data
 	},
+	{
+		.id = "10EC5660",
+		.drv_name = "kbl_rt5660",
+		.fw_filename = "intel/dsp_fw_kbl.bin",
+	},
+	{
+		.id = "10EC3277",
+		.drv_name = "kbl_rt5660",
+		.fw_filename = "intel/dsp_fw_kbl.bin",
+	},
 	{},
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_kbl_machines);
-- 
2.17.1



More information about the Alsa-devel mailing list