[alsa-devel] [PATCH 6/7 v2] ASoC: audio-graph-scu-card: remove audio-graph-scu-card on Doc

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

It is already merged into audio-graph-card.
audio-graph-scu-card is no longer needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 .../bindings/sound/audio-graph-scu-card.txt        | 123 ---------------------
 1 file changed, 123 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt

diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
deleted file mode 100644
index 62d4276..0000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
+++ /dev/null
@@ -1,123 +0,0 @@
-Audio-Graph-SCU-Card:
-
-Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM".
-
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio-Graph-SCU-Card property is same as
-Simple-Card / Simple-SCU-Card / Audio-Graph-Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
-    ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt
-    ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt
-
-Below are same as Simple-Card / Audio-Graph-Card.
-
-- label
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Below are same as Simple-SCU-Card.
-
-- convert-rate
-- convert-channels
-- prefix
-- routing
-
-Required properties:
-
-- compatible				: "audio-graph-scu-card";
-- dais					: list of CPU DAI port{s}
-
-Example 1. Sampling Rate Conversion
-
-	sound_card {
-		compatible = "audio-graph-scu-card";
-
-		label = "sound-card";
-		prefix = "codec";
-		routing = "codec Playback", "DAI0 Playback",
-			  "DAI0 Capture",   "codec Capture";
-		convert-rate = <48000>;
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
-Example 2. 2 CPU 1 Codec (Mixing)
-
-	sound_card {
-		compatible = "audio-graph-scu-card";
-
-		label = "sound-card";
-		routing = "codec Playback", "DAI0 Playback",
-			  "codec Playback", "DAI1 Playback",
-			  "DAI0 Capture",   "codec Capture";
-
-		dais = <&cpu_port0
-			&cpu_port1>;
-	};
-
-	audio-codec {
-		...
-
-		audio-graph-card,prefix = "codec";
-		audio-graph-card,convert-rate = <48000>;
-		port {
-			codec_endpoint0: endpoint {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-			codec_endpoint1: endpoint {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		ports {
-			cpu_port0: port {
-				cpu_endpoint0: endpoint {
-					remote-endpoint = <&codec_endpoint0>;
-
-					dai-format = "left_j";
-					...
-				};
-			};
-			cpu_port1: port {
-				cpu_endpoint1: endpoint {
-					remote-endpoint = <&codec_endpoint1>;
-
-					dai-format = "left_j";
-					...
-				};
-			};
-		};
-	};
-- 
2.7.4