[alsa-devel] [PATCH 16/21] ASoC: SOF: Intel: Add SKL-specific code loader
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Tue Dec 11 22:30:24 CET 2018
The code loader is different on SKL/KBL and we need a dedicated
loader. From APL onwards the same code loader will be used.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu at linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie at linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood at linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
sound/soc/sof/intel/hda-loader-skl.c | 531 +++++++++++++++++++++++++++
sound/soc/sof/intel/hda.h | 1 +
2 files changed, 532 insertions(+)
create mode 100644 sound/soc/sof/intel/hda-loader-skl.c
diff --git a/sound/soc/sof/intel/hda-loader-skl.c b/sound/soc/sof/intel/hda-loader-skl.c
new file mode 100644
index 000000000000..8437ce7201c7
--- /dev/null
+++ b/sound/soc/sof/intel/hda-loader-skl.c
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Authors: Liam Girdwood <liam.r.girdwood at linux.intel.com>
+// Zhu Yingjiang <yingjiang.zhu at linux.intel.com>
+//
+
+#include <linux/firmware.h>
+#include <sound/hdaudio_ext.h>
+#include <sound/sof.h>
+#include "../ops.h"
+#include "hda.h"
+
+#define HDA_SKL_WAIT_TIMEOUT 500 /* 500 msec */
+#define HDA_SKL_CLDMA_MAX_BUFFER_SIZE (32 * PAGE_SIZE)
+
+/* Stream Reset */
+#define HDA_CL_SD_CTL_SRST_SHIFT 0
+#define HDA_CL_SD_CTL_SRST(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_SRST_SHIFT)
+
+/* Stream Run */
+#define HDA_CL_SD_CTL_RUN_SHIFT 1
+#define HDA_CL_SD_CTL_RUN(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_RUN_SHIFT)
+
+/* Interrupt On Completion Enable */
+#define HDA_CL_SD_CTL_IOCE_SHIFT 2
+#define HDA_CL_SD_CTL_IOCE(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_IOCE_SHIFT)
+
+/* FIFO Error Interrupt Enable */
+#define HDA_CL_SD_CTL_FEIE_SHIFT 3
+#define HDA_CL_SD_CTL_FEIE(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_FEIE_SHIFT)
+
+/* Descriptor Error Interrupt Enable */
+#define HDA_CL_SD_CTL_DEIE_SHIFT 4
+#define HDA_CL_SD_CTL_DEIE(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_DEIE_SHIFT)
+
+/* FIFO Limit Change */
+#define HDA_CL_SD_CTL_FIFOLC_SHIFT 5
+#define HDA_CL_SD_CTL_FIFOLC(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_FIFOLC_SHIFT)
+
+/* Stripe Control */
+#define HDA_CL_SD_CTL_STRIPE_SHIFT 16
+#define HDA_CL_SD_CTL_STRIPE(x) (((x) & 0x3) << \
+ HDA_CL_SD_CTL_STRIPE_SHIFT)
+
+/* Traffic Priority */
+#define HDA_CL_SD_CTL_TP_SHIFT 18
+#define HDA_CL_SD_CTL_TP(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_TP_SHIFT)
+
+/* Bidirectional Direction Control */
+#define HDA_CL_SD_CTL_DIR_SHIFT 19
+#define HDA_CL_SD_CTL_DIR(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_DIR_SHIFT)
+
+/* Stream Number */
+#define HDA_CL_SD_CTL_STRM_SHIFT 20
+#define HDA_CL_SD_CTL_STRM(x) (((x) & 0xf) << \
+ HDA_CL_SD_CTL_STRM_SHIFT)
+
+#define HDA_CL_SD_CTL_INT(x) \
+ (HDA_CL_SD_CTL_IOCE(x) | \
+ HDA_CL_SD_CTL_FEIE(x) | \
+ HDA_CL_SD_CTL_DEIE(x))
+
+#define HDA_CL_SD_CTL_INT_MASK \
+ (HDA_CL_SD_CTL_IOCE(1) | \
+ HDA_CL_SD_CTL_FEIE(1) | \
+ HDA_CL_SD_CTL_DEIE(1))
+
+#define DMA_ADDRESS_128_BITS_ALIGNMENT 7
+#define BDL_ALIGN(x) ((x) >> DMA_ADDRESS_128_BITS_ALIGNMENT)
+
+/* Buffer Descriptor List Lower Base Address */
+#define HDA_CL_SD_BDLPLBA_SHIFT 7
+#define HDA_CL_SD_BDLPLBA_MASK GENMASK(HDA_CL_SD_BDLPLBA_SHIFT + 24,\
+ HDA_CL_SD_BDLPLBA_SHIFT)
+#define HDA_CL_SD_BDLPLBA(x) \
+ ((BDL_ALIGN(lower_32_bits(x)) << HDA_CL_SD_BDLPLBA_SHIFT) & \
+ HDA_CL_SD_BDLPLBA_MASK)
+
+/* Buffer Descriptor List Upper Base Address */
+#define HDA_CL_SD_BDLPUBA_SHIFT 0
+#define HDA_CL_SD_BDLPUBA_MASK GENMASK(HDA_CL_SD_BDLPUBA_SHIFT + 31,\
+ HDA_CL_SD_BDLPUBA_SHIFT)
+#define HDA_CL_SD_BDLPUBA(x) \
+ ((upper_32_bits(x) << HDA_CL_SD_BDLPUBA_SHIFT) & \
+ HDA_CL_SD_BDLPUBA_MASK)
+
+/* Software Position in Buffer Enable */
+#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT 0
+#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK \
+ BIT(HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT)
+
+#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(x) \
+ (((x) << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT) & \
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK)
+
+static int cl_skl_cldma_setup_bdle(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab_data,
+ __le32 **bdlp, int size, int with_ioc)
+{
+ __le32 *bdl = *bdlp;
+ int frags = 0;
+
+ while (size > 0) {
+ phys_addr_t addr = virt_to_phys(dmab_data->area +
+ (frags * size));
+
+ bdl[0] = cpu_to_le32(lower_32_bits(addr));
+ bdl[1] = cpu_to_le32(upper_32_bits(addr));
+
+ bdl[2] = cpu_to_le32(size);
+
+ size -= size;
+ bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);
+
+ bdl += 4;
+ frags++;
+ }
+
+ return frags;
+}
+
+static void cl_skl_cldma_stream_run(struct snd_sof_dev *sdev, bool enable)
+{
+ unsigned char val;
+ int timeout;
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+ u32 run = enable ? 0x1 : 0;
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_RUN(1), HDA_CL_SD_CTL_RUN(run));
+
+ udelay(3);
+ timeout = 300;
+ do {
+ /* waiting for hardware to report the stream Run bit set */
+ val = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL)
+ & HDA_CL_SD_CTL_RUN(1);
+ if (enable && val)
+ break;
+ else if (!enable && !val)
+ break;
+ udelay(3);
+ } while (--timeout);
+
+ if (timeout == 0)
+ dev_err(sdev->dev, "error: failed to set Run bit=%d enable=%d\n",
+ val, enable);
+}
+
+static void cl_skl_cldma_stream_clear(struct snd_sof_dev *sdev)
+{
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+
+ /* make sure Run bit is cleared before setting stream register */
+ cl_skl_cldma_stream_run(sdev, 0);
+
+ /* Disable the Interrupt On Completion, FIFO Error Interrupt,
+ * Descriptor Error Interrupt and set the cldma stream number to 0.
+ */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(0));
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_STRM(0xf), HDA_CL_SD_CTL_STRM(0));
+
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL,
+ HDA_CL_SD_BDLPLBA(0));
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0);
+
+ /* Set the Cyclic Buffer Length to 0. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CBL, 0);
+ /* Set the Last Valid Index. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_LVI, 0);
+}
+
+static void cl_skl_cldma_setup_spb(struct snd_sof_dev *sdev,
+ unsigned int size, bool enable)
+{
+ int sd_offset = SOF_DSP_REG_CL_SPBFIFO;
+
+ if (enable)
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset +
+ SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(1));
+
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, size);
+}
+
+static void cl_skl_cldma_set_intr(struct snd_sof_dev *sdev, bool enable)
+{
+ u32 val = enable ? HDA_DSP_ADSPIC_CL_DMA : 0;
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
+ HDA_DSP_ADSPIC_CL_DMA, val);
+}
+
+static void cl_skl_cldma_cleanup_spb(struct snd_sof_dev *sdev)
+{
+ int sd_offset = SOF_DSP_REG_CL_SPBFIFO;
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset +
+ SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(0));
+
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, 0);
+}
+
+static void cl_skl_cldma_setup_controller(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab_bdl,
+ unsigned int max_size, u32 count)
+{
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+ /* Clear the stream first and then set it. */
+ cl_skl_cldma_stream_clear(sdev);
+
+ /* setting the stream register */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL,
+ HDA_CL_SD_BDLPLBA(dmab_bdl->addr));
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU,
+ HDA_CL_SD_BDLPUBA(dmab_bdl->addr));
+
+ /* Set the Cyclic Buffer Length. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CBL, max_size);
+ /* Set the Last Valid Index. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_LVI, count - 1);
+
+ /* Set the Interrupt On Completion, FIFO Error Interrupt,
+ * Descriptor Error Interrupt and the cldma stream number.
+ */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(1));
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_STRM(0xf),
+ HDA_CL_SD_CTL_STRM(1));
+}
+
+static int cl_stream_prepare_skl(struct snd_sof_dev *sdev)
+{
+ struct pci_dev *pci = sdev->pci;
+ int frags = 0;
+ int ret = 0;
+ __le32 *bdl;
+ unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE;
+
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, &pci->dev, bufsize,
+ &sdev->dmab);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to alloc fw buffer: %x\n",
+ ret);
+ return ret;
+ }
+
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, &pci->dev, bufsize,
+ &sdev->dmab_bdl);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to alloc blde: %x\n", ret);
+ snd_dma_free_pages(&sdev->dmab);
+ return ret;
+ }
+
+ bdl = (__le32 *)sdev->dmab_bdl.area;
+ frags = cl_skl_cldma_setup_bdle(sdev, &sdev->dmab, &bdl, bufsize, 1);
+ cl_skl_cldma_setup_controller(sdev, &sdev->dmab_bdl, bufsize, frags);
+
+ return ret;
+}
+
+static void cl_cleanup_skl(struct snd_sof_dev *sdev)
+{
+ cl_skl_cldma_cleanup_spb(sdev);
+ cl_skl_cldma_stream_clear(sdev);
+ snd_dma_free_pages(&sdev->dmab);
+ snd_dma_free_pages(&sdev->dmab_bdl);
+ sdev->dmab.area = NULL;
+}
+
+static int cl_dsp_init_skl(struct snd_sof_dev *sdev)
+{
+ const struct sof_intel_dsp_desc *chip = sdev->hda->desc;
+ int ret;
+
+ /* check if the core is already enabled, if yes, reset and make it run,
+ * if not, powerdown and enable it again.
+ */
+ if (hda_dsp_core_is_enabled(sdev, HDA_DSP_CORE_MASK(0))) {
+
+ /* if enabled, reset it, and run the core. */
+ ret = hda_dsp_core_stall_reset(sdev, HDA_DSP_CORE_MASK(0));
+ if (ret < 0)
+ goto err;
+
+ ret = hda_dsp_core_run(sdev, HDA_DSP_CORE_MASK(0));
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dsp core start failed %d\n",
+ ret);
+ goto err;
+ }
+ } else {
+ /* if not enabled, power down it first and then powerup and run
+ * the core.
+ */
+ ret = hda_dsp_core_reset_power_down(sdev, HDA_DSP_CORE_MASK(0));
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dsp core0 disable fail: %d\n", ret);
+ goto err;
+ }
+ ret = hda_dsp_enable_core(sdev, HDA_DSP_CORE_MASK(0));
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dsp core0 enable fail: %d\n", ret);
+ goto err;
+ }
+ }
+
+ /* prepare DMA for code loader stream */
+ ret = cl_stream_prepare_skl(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: dma prepare fw loading err: %x\n",
+ ret);
+ return ret;
+ }
+
+ /* enable the interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
+ HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
+
+ /* enable IPC DONE interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
+ HDA_DSP_REG_HIPCCTL_DONE,
+ HDA_DSP_REG_HIPCCTL_DONE);
+
+ /* enable IPC BUSY interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
+ HDA_DSP_REG_HIPCCTL_BUSY,
+ HDA_DSP_REG_HIPCCTL_BUSY);
+
+ /* polling the ROM init status information. */
+ ret = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR,
+ HDA_ADSP_FW_STATUS_SKL,
+ HDA_DSP_ROM_STS_MASK, HDA_DSP_ROM_INIT,
+ HDA_DSP_INIT_TIMEOUT);
+ if (ret < 0)
+ goto err;
+
+ return ret;
+
+err:
+ hda_dsp_dump_skl(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
+ cl_cleanup_skl(sdev);
+ hda_dsp_core_reset_power_down(sdev, HDA_DSP_CORE_MASK(0));
+ return ret;
+}
+
+static void cl_skl_cldma_fill_buffer(struct snd_sof_dev *sdev,
+ unsigned int bufsize,
+ unsigned int copysize,
+ const void *curr_pos,
+ bool intr_enable, bool trigger)
+{
+ /* 1. copy the image into the buffer with the maximum buffer size. */
+ unsigned int size = (bufsize == copysize) ? bufsize : copysize;
+
+ memcpy(sdev->dmab.area, curr_pos, size);
+
+ /* 2. Set the interrupt. */
+ if (intr_enable)
+ cl_skl_cldma_set_intr(sdev, true);
+
+ /* 3. Set the SPB. */
+ cl_skl_cldma_setup_spb(sdev, size, trigger);
+
+ /* 4. Trigger the code loading stream. */
+ if (trigger)
+ cl_skl_cldma_stream_run(sdev, true);
+}
+
+static int
+cl_skl_cldma_copy_to_buf(struct snd_sof_dev *sdev, const void *bin,
+ u32 total_size, u32 bufsize)
+{
+ int ret = 0;
+ unsigned int bytes_left = total_size;
+ const void *curr_pos = bin;
+
+ if (total_size <= 0)
+ return -EINVAL;
+
+ while (bytes_left > 0) {
+
+ if (bytes_left > bufsize) {
+
+ dev_dbg(sdev->dev, "cldma copy 0x%x bytes\n",
+ bufsize);
+
+ cl_skl_cldma_fill_buffer(sdev, bufsize, bufsize,
+ curr_pos, true, true);
+
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: fw failed to load. 0x%x bytes remaining\n",
+ bytes_left);
+ cl_skl_cldma_stream_run(sdev, false);
+ return ret;
+ }
+
+ bytes_left -= bufsize;
+ curr_pos += bufsize;
+ } else {
+
+ dev_dbg(sdev->dev, "cldma copy 0x%x bytes\n",
+ bytes_left);
+
+ cl_skl_cldma_set_intr(sdev, false);
+ cl_skl_cldma_fill_buffer(sdev, bufsize, bytes_left,
+ curr_pos, false, false);
+ return 0;
+ }
+ }
+
+ return bytes_left;
+}
+
+static int cl_copy_fw_skl(struct snd_sof_dev *sdev)
+{
+ struct snd_sof_pdata *plat_data = dev_get_platdata(sdev->dev);
+ const struct firmware *fw = plat_data->fw;
+ unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE;
+ int ret = 0;
+
+ dev_dbg(sdev->dev, "firmware size: 0x%zx buffer size 0x%x\n", fw->size,
+ bufsize);
+
+ ret = cl_skl_cldma_copy_to_buf(sdev, fw->data, fw->size, bufsize);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: fw copy failed %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_sof_dsp_register_poll(sdev, HDA_DSP_BAR,
+ HDA_ADSP_FW_STATUS_SKL,
+ HDA_DSP_ROM_STS_MASK,
+ HDA_DSP_ROM_FW_FW_LOADED,
+ HDA_DSP_BASEFW_TIMEOUT);
+ if (ret < 0)
+ dev_err(sdev->dev, "error: firmware transfer timeout!");
+
+ cl_skl_cldma_stream_run(sdev, false);
+ cl_cleanup_skl(sdev);
+
+ return ret;
+}
+
+int hda_dsp_cl_boot_firmware_skl(struct snd_sof_dev *sdev)
+{
+ int ret;
+
+ ret = cl_dsp_init_skl(sdev);
+
+ /* retry enabling core and ROM load. seemed to help */
+ if (ret < 0) {
+ ret = cl_dsp_init_skl(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: Error code=0x%x: FW status=0x%x\n",
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_ADSP_ERROR_CODE_SKL),
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_ADSP_FW_STATUS_SKL));
+ dev_err(sdev->dev, "error: Core En/ROM load fail:%d\n", ret);
+ goto irq_err;
+ }
+ }
+
+ dev_dbg(sdev->dev, "ROM init successful\n");
+
+ /* init for booting wait */
+ init_waitqueue_head(&sdev->boot_wait);
+ sdev->boot_complete = false;
+
+ /* at this point DSP ROM has been initialized and should be ready for
+ * code loading and firmware boot
+ */
+ ret = cl_copy_fw_skl(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: load firmware failed : %d\n", ret);
+ goto irq_err;
+ }
+
+ dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
+
+ return ret;
+
+irq_err:
+ hda_dsp_dump_skl(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
+
+ /* power down DSP */
+ hda_dsp_core_reset_power_down(sdev, HDA_DSP_CORE_MASK(0));
+ cl_cleanup_skl(sdev);
+
+ dev_err(sdev->dev, "error: load fw failed err: %d\n", ret);
+ return ret;
+}
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index 1d1b8a843ecc..4a1bbc948b9f 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -59,6 +59,7 @@
#define SOF_HDA_PP_CAP_ID 0x3
#define SOF_HDA_REG_PP_PPCH 0x10
#define SOF_HDA_REG_PP_PPCTL 0x04
+#define SOF_HDA_REG_PP_PPSTS 0x08
#define SOF_HDA_PPCTL_PIE BIT(31)
#define SOF_HDA_PPCTL_GPROCEN BIT(30)
--
2.17.1
More information about the Alsa-devel
mailing list