[alsa-devel] [PATCH] ASoC: Intel: Boards: move the codec PLL configuration to _init

mac.chiang at intel.com mac.chiang at intel.com
Wed Dec 5 11:11:19 CET 2018


From: Mac Chiang <mac.chiang at intel.com>

move the codec PLL to rt5682_codec_init, because codec only need to config the clock source/PLL once.
As the result, remove the platform_clock_controls since no need to control clock anymore.

Signed-off-by: Shuming Fan <shumingf at realtek.com>
Signed-off-by: Mac Chiang <mac.chiang at intel.com>
---
 sound/soc/intel/boards/glk_rt5682_max98357a.c | 45 +++++----------------------
 1 file changed, 7 insertions(+), 38 deletions(-)

diff --git a/sound/soc/intel/boards/glk_rt5682_max98357a.c b/sound/soc/intel/boards/glk_rt5682_max98357a.c
index c74c4f1..8f83b18 100644
--- a/sound/soc/intel/boards/glk_rt5682_max98357a.c
+++ b/sound/soc/intel/boards/glk_rt5682_max98357a.c
@@ -55,39 +55,6 @@ enum {
 	GLK_DPCM_AUDIO_HDMI3_PB,
 };
 
-static int platform_clock_control(struct snd_soc_dapm_widget *w,
-					struct snd_kcontrol *k, int  event)
-{
-	struct snd_soc_dapm_context *dapm = w->dapm;
-	struct snd_soc_card *card = dapm->card;
-	struct snd_soc_dai *codec_dai;
-	int ret = 0;
-
-	codec_dai = snd_soc_card_get_codec_dai(card, GLK_REALTEK_CODEC_DAI);
-	if (!codec_dai) {
-		dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n");
-		return -EIO;
-	}
-
-	if (SND_SOC_DAPM_EVENT_OFF(event)) {
-		ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, 0);
-		if (ret)
-			dev_err(card->dev, "failed to stop sysclk: %d\n", ret);
-	} else if (SND_SOC_DAPM_EVENT_ON(event)) {
-		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
-					GLK_PLAT_CLK_FREQ, RT5682_PLL_FREQ);
-		if (ret < 0) {
-			dev_err(card->dev, "can't set codec pll: %d\n", ret);
-			return ret;
-		}
-	}
-
-	if (ret)
-		dev_err(card->dev, "failed to start internal clk: %d\n", ret);
-
-	return ret;
-}
-
 static const struct snd_kcontrol_new geminilake_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -102,14 +69,10 @@ static const struct snd_soc_dapm_widget geminilake_widgets[] = {
 	SND_SOC_DAPM_SPK("HDMI1", NULL),
 	SND_SOC_DAPM_SPK("HDMI2", NULL),
 	SND_SOC_DAPM_SPK("HDMI3", NULL),
-	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
-			platform_clock_control, SND_SOC_DAPM_PRE_PMU |
-			SND_SOC_DAPM_POST_PMD),
 };
 
 static const struct snd_soc_dapm_route geminilake_map[] = {
 	/* HP jack connectors - unknown if we have jack detection */
-	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headphone Jack", NULL, "HPOL" },
 	{ "Headphone Jack", NULL, "HPOR" },
 
@@ -117,7 +80,6 @@ static const struct snd_soc_dapm_route geminilake_map[] = {
 	{ "Spk", NULL, "Speaker" },
 
 	/* other jacks */
-	{ "Headset Mic", NULL, "Platform Clock" },
 	{ "IN1P", NULL, "Headset Mic" },
 
 	/* digital mics */
@@ -177,6 +139,13 @@ static int geminilake_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 	struct snd_soc_jack *jack;
 	int ret;
 
+	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
+					GLK_PLAT_CLK_FREQ, RT5682_PLL_FREQ);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+		return ret;
+	}
+
 	/* Configure sysclk for codec */
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
 					RT5682_PLL_FREQ, SND_SOC_CLOCK_IN);
-- 
2.7.4



More information about the Alsa-devel mailing list