[alsa-devel] 答复: 答复: 答复: A bug about cache inconsistency report

[Hans Hu(SH-RD)]

-----邮件原件-----
发件人: Takashi Iwai [mailto:tiwai at suse.de]
发送时间: 02 August 2018 22:36
收件人: Hans Hu(SH-RD) <HansHu at zhaoxin.com>
抄送: 'alsa-devel at alsa-project.org' <alsa-devel at alsa-project.org>
主题: Re: 答复: 答复: [alsa-devel] A bug about cache inconsistency report

On Thu, 02 Aug 2018 15:59:31 +0200,
Hans Hu(SH-RD) wrote:
>
> > 1. noise relate test:
> > When I annotate the return after set_pages_array_wc, then
> > set_memory_wc works, noise disappear static void
> > __mark_pages_wc(struct azx *chip, struct snd_dma_buffer *dmab, bool
> > on) { ...
> > set_pages_array_wb(sgbuf->page_table, sgbuf->pages); //return; }
> > #endif
>
> > set_memory_uc() performs __pa() for the given address, and in this case, it's vmapped address.  Something bogus in your test, I'm afraid.
>
> [Hans:] I know __pa() handle the vmapped address is wrong, that why I don't know how to fix the problem, I try this because I see kernel older than 3.7.6. [bogus? pretending to be real or genuine?] no no no, but the noise problem machine(8086:1c20) in another city, I will make sure it again.

>I meant about the reliability of the test result.  Or whether we're heading to a wrong fish.
>In anyway, which kernel version are you testing?  And exactly what is your problem?  Which machine, which hardware setup (codec, etc) and which output, and how is the sound backend (PulseAudio or direct ALSA write)?

[Hans:] OS: Ubuntu 17.10 + 4.13.0-21-generic (or any one after 3.7.6).
HW: mother board is Dell 042P49, HDA controller is 8086:1c20, codec is cx20641.
Output and sound backend: Except the command below, anything other is default setting.

Problem(what I have done and found): When system setup, I add "modprobe snd-had-intel.snoop=0" in grub, after setup, execute command "aplay -D plughw:0,0 44.1k_16b_2c.wav", then I hear music with noise. The reason cause this is the buffer address should been mark as WC type and the __mark_pages_wc was patched for this, but if define CONFIG_SND_DMA_SGBUF, the actual marked address is the address before vmapped(0xffff88*...*), however the address used in snd_pcm_lib_write_transfer() is the address after vmapped(0xffffc9*...*), so the mark didn't work and cache inconsistency occur(noise).

> > And moreover, all Intel chipsets do work with snooping well, AFAIK.
> [Hans:] yes, all Intel chipsets do work with snooping well here too. And the problem case here is "non-snoop"+"aplay -D plughw:*.*"+"44.1k 16bit"+"8086:1c20", I will see if I can find more machine do the test.
>Ah, so you explicitly test with non-snoop mode for this chipset?
>For what purpose...?

[Hans:] Yes, I've been testing a HDA controller recently(predecessor is VIA), it has the same problem. I want to figure out if it is hardware's problem or not.

[Hans:] I did the same test on another platform(8086:A170), it do work with non-snoop well.  In addition, I did such a change, oneliner, the purpose is to mark nothing, and it still do work with non-snoop well, this  supposed to be right?

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
#ifdef CONFIG_X86
static void __mark_pages_wc(struct azx *chip, struct snd_dma_buffer *dmab, bool on)
{
int pages;
+return;



> > 2. change *_SG relate test:
> > Just followed your proposal
> > -snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
> > +snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
>
> >OK, you need one more oneliner:
>
> >diff --git a/sound/pci/hda/hda_controller.c
> >b/sound/pci/hda/hda_controller.c index a12e594d4e3b..2eaed4956e7f
> >100644
> >--- a/sound/pci/hda/hda_controller.c
> >+++ b/sound/pci/hda/hda_controller.c
> >@@ -707,7 +707,7 @@ static const struct snd_pcm_ops azx_pcm_ops = {
>  >.pointer = azx_pcm_pointer,
>  >.get_time_info =  azx_get_time_info,  >.mmap = azx_pcm_mmap,
> >-.page = snd_pcm_sgbuf_ops_page,
> >+// .page = snd_pcm_sgbuf_ops_page,
> > };
>
> > static void azx_pcm_free(struct snd_pcm *pcm)
> [Hans :] I did this, and the Oops report as the same.

>My bad, there are other SG-buffer codes in sound/hda/*, too.

>So scratch these two oneliners.  The only thing you'd need is the big-hammer change (again oneliner :)

>--- a/sound/core/Kconfig
>+++ b/sound/core/Kconfig
>@@ -181,7 +181,7 @@ config SND_VMASTER
 >bool
>
> config SND_DMA_SGBUF
>-def_bool y
>+def_bool n
> depends on X86

> source "sound/core/seq/Kconfig"

[Hans :] If this, All the platform are all right.


Thank you,

Hans


保密声明：
本邮件含有保密或专有信息，仅供指定收件人使用。严禁对本邮件或其内容做任何未经授权的查阅、使用、复制或转发。
CONFIDENTIAL NOTE:
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or forwarding of this email or the content of this email is strictly prohibited.