[alsa-devel] [PATCH 06/11] ASoC: amd: sram bank update changes

Mukunda,Vijendar vijendar.mukunda at amd.com
Mon Apr 30 10:17:48 CEST 2018



On Monday 30 April 2018 03:17 AM, Daniel Kurtz wrote:
> On Thu, Apr 26, 2018 at 5:16 AM Vijendar Mukunda <Vijendar.Mukunda at amd.com>
> wrote:
> 
>> Added sram bank variable to audio_substream_data structure.
> 
>> Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda at amd.com>
> 
> Move initialization to acp_dma_open(), otherwise this is:
> Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>

As explained in Patch 2 review comments, initialization part  we moved 
to acp_dma_hw_params() callback.

> 
>> ---
>>    sound/soc/amd/acp-pcm-dma.c | 20 +++++---------------
>>    sound/soc/amd/acp.h         | 20 ++++++++++++++------
>>    2 files changed, 19 insertions(+), 21 deletions(-)
> 
>> diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
>> index cb22653..b7bffc7 100644
>> --- a/sound/soc/amd/acp-pcm-dma.c
>> +++ b/sound/soc/amd/acp-pcm-dma.c
>> @@ -320,29 +320,16 @@ static void config_acp_dma(void __iomem *acp_mmio,
>>                              struct audio_substream_data *rtd,
>>                              u32 asic_type)
>>    {
>> -       u32 sram_bank;
>> -
>> -       if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK)
>> -               sram_bank = ACP_SHARED_RAM_BANK_1_ADDRESS;
>> -       else {
>> -               switch (asic_type) {
>> -               case CHIP_STONEY:
>> -                       sram_bank = ACP_SHARED_RAM_BANK_3_ADDRESS;
>> -                       break;
>> -               default:
>> -                       sram_bank = ACP_SHARED_RAM_BANK_5_ADDRESS;
>> -               }
>> -       }
>>           acp_pte_config(acp_mmio, rtd->pg, rtd->num_of_pages,
>>                          rtd->pte_offset);
>>           /* Configure System memory <-> ACP SRAM DMA descriptors */
>>           set_acp_sysmem_dma_descriptors(acp_mmio, rtd->size,
>>                                          rtd->direction, rtd->pte_offset,
>> -                                      rtd->ch1, sram_bank,
>> +                                      rtd->ch1, rtd->sram_bank,
>>                                          rtd->dma_dscr_idx_1, asic_type);
>>           /* Configure ACP SRAM <-> I2S DMA descriptors */
>>           set_acp_to_i2s_dma_descriptors(acp_mmio, rtd->size,
>> -                                      rtd->direction, sram_bank,
>> +                                      rtd->direction, rtd->sram_bank,
>>                                          rtd->destination, rtd->ch2,
>>                                          rtd->dma_dscr_idx_2, asic_type);
>>    }
>> @@ -795,6 +782,7 @@ static int acp_dma_hw_params(struct snd_pcm_substream
> *substream,
>>                   }
>>                   rtd->ch1 = SYSRAM_TO_ACP_CH_NUM;
>>                   rtd->ch2 = ACP_TO_I2S_DMA_CH_NUM;
>> +               rtd->sram_bank = ACP_SRAM_BANK_1_ADDRESS;
>>                   rtd->destination = TO_ACP_I2S_1;
>>                   rtd->dma_dscr_idx_1 = PLAYBACK_START_DMA_DESCR_CH12;
>>                   rtd->dma_dscr_idx_2 = PLAYBACK_START_DMA_DESCR_CH13;
>> @@ -805,9 +793,11 @@ static int acp_dma_hw_params(struct
> snd_pcm_substream *substream,
>>                   switch (adata->asic_type) {
>>                   case CHIP_STONEY:
>>                           rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET;
>> +                       rtd->sram_bank = ACP_SRAM_BANK_2_ADDRESS;
>>                           break;
>>                   default:
>>                           rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET;
>> +                       rtd->sram_bank = ACP_SRAM_BANK_5_ADDRESS;
>>                   }
>>                   rtd->ch1 = SYSRAM_TO_ACP_CH_NUM;
>>                   rtd->ch2 = ACP_TO_I2S_DMA_CH_NUM;
>> diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
>> index 2f48d1d..62695ed 100644
>> --- a/sound/soc/amd/acp.h
>> +++ b/sound/soc/amd/acp.h
>> @@ -19,12 +19,19 @@
> 
>>    #define ACP_PHYSICAL_BASE                      0x14000
> 
>> -/* Playback SRAM address (as a destination in dma descriptor) */
>> -#define ACP_SHARED_RAM_BANK_1_ADDRESS          0x4002000
>> -
>> -/* Capture SRAM address (as a source in dma descriptor) */
>> -#define ACP_SHARED_RAM_BANK_5_ADDRESS          0x400A000
>> -#define ACP_SHARED_RAM_BANK_3_ADDRESS          0x4006000
>> +/*
>> + * In case of I2S SP controller instance, Stoney uses SRAM bank 1 for
>> + * playback and SRAM Bank 2 for capture where as in case of BT I2S
>> + * Instance, Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will
>> + * be used for capture. Carrizo uses I2S SP controller instance. SRAM
> Banks
>> + * 1, 2, 3, 4 will be used for playback & SRAM Banks 5, 6, 7, 8 will be
> used
>> + * for capture scenario.
>> + */
>> +#define ACP_SRAM_BANK_1_ADDRESS                0x4002000
>> +#define ACP_SRAM_BANK_2_ADDRESS                0x4004000
>> +#define ACP_SRAM_BANK_3_ADDRESS                0x4006000
>> +#define ACP_SRAM_BANK_4_ADDRESS                0x4008000
>> +#define ACP_SRAM_BANK_5_ADDRESS                0x400A000
> 
>>    #define ACP_DMA_RESET_TIME                     10000
>>    #define ACP_CLOCK_EN_TIME_OUT_VALUE            0x000000FF
>> @@ -95,6 +102,7 @@ struct audio_substream_data {
>>           u16 dma_dscr_idx_1;
>>           u16 dma_dscr_idx_2;
>>           u32 pte_offset;
>> +       u32 sram_bank;
>>           u32 byte_cnt_high_reg_offset;
>>           u32 byte_cnt_low_reg_offset;
>>           uint64_t size;
>> --
>> 2.7.4


More information about the Alsa-devel mailing list