[alsa-devel] [PATCH 4/5] conf/ucm: chtrt5645: At config for the Asus T100HA
Hans de Goede
hdegoede at redhat.com
Sat Apr 28 21:51:59 CEST 2018
The Asus T100HA uses a digital mic rather then an analog one, add
long-name config specific for the T100HA, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for the digital mic found on the Asus T100HA.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
configure.ac | 1 +
...USTeKCOMPUTERINC.-T100HAN-1.0-T100HAN.conf | 5 +
.../HiFi.conf | 348 ++++++++++++++++++
.../Makefile.am | 4 +
src/conf/ucm/Makefile.am | 1 +
5 files changed, 359 insertions(+)
create mode 100644 src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN.conf
create mode 100644 src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
create mode 100644 src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile.am
diff --git a/configure.ac b/configure.ac
index 5bc1994f..94baf055 100644
--- a/configure.ac
+++ b/configure.ac
@@ -717,6 +717,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
src/conf/cards/Makefile \
src/conf/pcm/Makefile \
src/conf/ucm/Makefile \
+ src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile \
src/conf/ucm/broadwell-rt286/Makefile \
src/conf/ucm/broxton-rt298/Makefile \
src/conf/ucm/bytcr-rt5651/Makefile \
diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN.conf b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN.conf
new file mode 100644
index 00000000..5afe5f0b
--- /dev/null
+++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN.conf
@@ -0,0 +1,5 @@
+Comment "Intel SoC Audio Device"
+SectionUseCase."HiFi" {
+ File "../ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf"
+ Comment "Default"
+}
diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
new file mode 100644
index 00000000..78bf9823
--- /dev/null
+++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/HiFi.conf
@@ -0,0 +1,348 @@
+SectionVerb {
+ # ALSA PCM
+ Value {
+ TQ "HiFi"
+
+ # ALSA PCM device for HiFi
+ PlaybackPCM "hw:chtrt5645"
+ CapturePCM "hw:chtrt5645"
+ }
+
+ EnableSequence [
+ cdev "hw:chtrt5645"
+
+ # media mixer settings
+ # compress
+ cset "name='media0_in Gain 0 Switch' on"
+ cset "name='media0_in Gain 0 Volume' 0"
+
+ # normal
+ cset "name='media1_in Gain 0 Switch' on"
+ cset "name='media1_in Gain 0 Volume' 0"
+ # swm loopback
+ cset "name='media2_in Gain 0 Switch' off"
+ cset "name='media2_in Gain 0 Volume' 0%"
+ # deep buffer
+ cset "name='media3_in Gain 0 Switch' on"
+ cset "name='media3_in Gain 0 Volume' 0"
+
+ cset "name='media0_out mix 0 media0_in Switch' on"
+ cset "name='media0_out mix 0 media1_in Switch' on"
+ cset "name='media0_out mix 0 media2_in Switch' off"
+ cset "name='media0_out mix 0 media3_in Switch' on"
+
+ cset "name='media1_out mix 0 media0_in Switch' off"
+ cset "name='media1_out mix 0 media1_in Switch' off"
+ cset "name='media1_out mix 0 media2_in Switch' off"
+ cset "name='media1_out mix 0 media3_in Switch' off"
+
+ cset "name='pcm0_in Gain 0 Switch' on"
+ cset "name='pcm0_in Gain 0 Volume' 0"
+
+ cset "name='pcm1_in Gain 0 Switch' off"
+ cset "name='pcm1_in Gain 0 Volume' 0%"
+
+ # codec0_out settings (used if ssp2 is connected to aif1)
+ cset "name='codec_out0 mix 0 codec_in0 Switch' off"
+ cset "name='codec_out0 mix 0 codec_in1 Switch' off"
+ cset "name='codec_out0 mix 0 media_loop1_in Switch' off"
+ cset "name='codec_out0 mix 0 media_loop2_in Switch' off"
+ cset "name='codec_out0 mix 0 pcm0_in Switch' on"
+ cset "name='codec_out0 mix 0 pcm1_in Switch' off"
+ cset "name='codec_out0 mix 0 sprot_loop_in Switch' off"
+ cset "name='codec_out0 Gain 0 Switch' on"
+ cset "name='codec_out0 Gain 0 Volume' 0"
+
+ # modem_out settings (used if ssp0 is connected to aif2)
+ cset "name='modem_out mix 0 codec_in0 Switch' off"
+ cset "name='modem_out mix 0 codec_in1 Switch' off"
+ cset "name='modem_out mix 0 media_loop1_in Switch' off"
+ cset "name='modem_out mix 0 media_loop2_in Switch' off"
+ cset "name='modem_out mix 0 pcm0_in Switch' on"
+ cset "name='modem_out mix 0 pcm1_in Switch' off"
+ cset "name='modem_out mix 0 sprot_loop_in Switch' off"
+ cset "name='modem_out Gain 0 Switch' on"
+ cset "name='modem_out Gain 0 Volume' 0"
+
+ # input settings
+ # pcm1_out settings
+
+ # input used when SSP2 is connected
+ cset "name='codec_in0 Gain 0 Switch' on"
+ cset "name='codec_in0 Gain 0 Volume' 0"
+
+ # input used when SSP0 is connected
+ cset "name='modem_in Gain 0 Switch' on"
+ cset "name='modem_in Gain 0 Volume' 0"
+
+ cset "name='pcm1_out mix 0 codec_in0 Switch' on"
+ cset "name='pcm1_out mix 0 modem_in Switch' on"
+ cset "name='pcm1_out mix 0 codec_in1 Switch' off"
+ cset "name='pcm1_out mix 0 media_loop1_in Switch' off"
+ cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
+ cset "name='pcm1_out mix 0 pcm0_in Switch' off"
+ cset "name='pcm1_out mix 0 pcm1_in Switch' off"
+ cset "name='pcm1_out mix 0 sprot_loop_in Switch' off"
+
+ cset "name='pcm1_out Gain 0 Switch' on"
+ cset "name='pcm1_out Gain 0 Volume' 0"
+
+ # disable codec_out1
+ cset "name='codec_out1 mix 0 codec_in0 Switch' off"
+ cset "name='codec_out1 mix 0 codec_in1 Switch' off"
+ cset "name='codec_out1 mix 0 media_loop1_in Switch' off"
+ cset "name='codec_out1 mix 0 media_loop2_in Switch' off"
+ cset "name='codec_out1 mix 0 pcm0_in Switch' off"
+ cset "name='codec_out1 mix 0 pcm1_in Switch' off"
+ cset "name='codec_out1 mix 0 sprot_loop_in Switch' off"
+ cset "name='codec_out1 Gain 0 Switch' off"
+ cset "name='codec_out1 Gain 0 Volume' 0%"
+
+ # disable codec_in1
+ cset "name='codec_in1 Gain 0 Switch' off"
+ cset "name='codec_in1 Gain 0 Volume' 0%"
+
+ # disable all loops
+ cset "name='media_loop1_out mix 0 codec_in0 Switch' off"
+ cset "name='media_loop1_out mix 0 codec_in1 Switch' off"
+ cset "name='media_loop1_out mix 0 media_loop1_in Switch' off"
+ cset "name='media_loop1_out mix 0 media_loop2_in Switch' off"
+ cset "name='media_loop1_out mix 0 pcm0_in Switch' off"
+ cset "name='media_loop1_out mix 0 pcm1_in Switch' off"
+ cset "name='media_loop1_out mix 0 sprot_loop_in Switch' off"
+
+ cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
+ cset "name='media_loop2_out mix 0 codec_in1 Switch' off"
+ cset "name='media_loop2_out mix 0 media_loop1_in Switch' off"
+ cset "name='media_loop2_out mix 0 media_loop2_in Switch' off"
+ cset "name='media_loop2_out mix 0 pcm0_in Switch' off"
+ cset "name='media_loop2_out mix 0 pcm1_in Switch' off"
+ cset "name='media_loop2_out mix 0 sprot_loop_in Switch' off"
+
+ cset "name='sprot_loop_out mix 0 codec_in0 Switch' off"
+ cset "name='sprot_loop_out mix 0 codec_in1 Switch' off"
+ cset "name='sprot_loop_out mix 0 media_loop1_in Switch' off"
+ cset "name='sprot_loop_out mix 0 media_loop2_in Switch' off"
+ cset "name='sprot_loop_out mix 0 pcm0_in Switch' off"
+ cset "name='sprot_loop_out mix 0 pcm1_in Switch' off"
+ cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
+
+ # Output Configuration
+ cset "name='DAC1 L Mux' IF1 DAC"
+ cset "name='DAC1 R Mux' IF1 DAC"
+ cset "name='DAC1 MIXL DAC1 Switch' 1"
+ cset "name='DAC1 MIXR DAC1 Switch' 1"
+ cset "name='Stereo DAC MIXL DAC L1 Switch' 1"
+ cset "name='Stereo DAC MIXR DAC R1 Switch' 1"
+
+ cset "name='DAC L2 Mux' IF2 DAC"
+ cset "name='DAC R2 Mux' IF2 DAC"
+ cset "name='Mono DAC MIXL DAC L2 Switch' on"
+ cset "name='Mono DAC MIXR DAC R2 Switch' on"
+ cset "name='DAC2 Playback Switch' on"
+
+ cset "name='HPOVOL MIXL DAC1 Switch' on"
+ cset "name='HPOVOL MIXR DAC1 Switch' on"
+ cset "name='HPOVOL MIXL DAC2 Switch' on"
+ cset "name='HPOVOL MIXR DAC2 Switch' on"
+ cset "name='HPO MIX HPVOL Switch' on"
+ cset "name='HPOVOL L Switch' on"
+ cset "name='HPOVOL R Switch' on"
+
+ cset "name='SPK MIXL DAC L1 Switch' on"
+ cset "name='SPK MIXR DAC R1 Switch' on"
+ cset "name='SPK MIXL DAC L2 Switch' on"
+ cset "name='SPK MIXR DAC R2 Switch' on"
+ cset "name='SPOL MIX SPKVOL L Switch' on"
+ cset "name='SPOR MIX SPKVOL R Switch' on"
+ cset "name='SPKVOL L Switch' on"
+ cset "name='SPKVOL R Switch' on"
+
+ # Input Configuration
+ cset "name='Stereo1 DMIC Mux' 0"
+ cset "name='Stereo1 ADC1 Mux' 1"
+ cset "name='Stereo1 ADC2 Mux' 1"
+ cset "name='ADC Capture Switch' on"
+ # 55/63
+ cset "name='ADC Capture Volume' 55"
+ # set ADC Boost to 0/3, higher vals cause a lot of white noise
+ cset "name='ADC Boost Capture Volume' 0"
+ # 55/63
+ cset "name='Mono ADC Capture Volume' 55"
+ # 0/3
+ cset "name='Mono ADC Boost Capture Volume' 0"
+ # 27/31
+ cset "name='IN Capture Volume' 27"
+ cset "name='I2S2 Func Switch' on"
+ # 3/12 the headphone mic tends to be quite loud
+ cset "name='IN1 Boost' 3"
+ # 8/8 the internal analog mic tends to be quite soft
+ cset "name='IN2 Boost' 8"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtrt5645"
+
+ # Disable audio output path
+ cset "name='codec_out1 mix 0 pcm0_in Switch' off"
+ cset "name='media0_out mix 0 media1_in Switch' off"
+
+ cset "name='media1_in Gain 0 Switch' off"
+ cset "name='pcm0_in Gain 0 Switch' off"
+ cset "name='codec_out1 Gain 0 Switch' off"
+
+ # Disable audio input path
+ cset "name='pcm1_out mix 0 media_loop2_in Switch' off"
+ cset "name='media_loop2_out mix 0 codec_in0 Switch' off"
+
+ cset "name='media_loop2_out Gain 0 Switch' off"
+ cset "name='pcm1_out Gain 0 Switch' off"
+ cset "name='codec_in0 Gain 0 Switch' off"
+ ]
+}
+
+SectionDevice."Speaker" {
+ Comment "Speaker"
+
+ Value {
+ PlaybackChannels "2"
+ }
+
+ ConflictingDevice [
+ "Headphones"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Headphone Switch' off"
+ cset "name='Headphone Channel Switch' off"
+
+ cset "name='Ext Spk Switch' on"
+ cset "name='Speaker Channel Switch' on"
+ cset "name='Speaker Playback Volume' 31"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Ext Spk Switch' off"
+ cset "name='Speaker Channel Switch' off"
+ ]
+}
+
+SectionDevice."Headphones" {
+ Comment "Headphones"
+
+ Value {
+ PlaybackChannels "2"
+ JackControl "Headphone Jack"
+ JackHWMute "Speaker"
+ }
+
+ ConflictingDevice [
+ "Speaker"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Ext Spk Switch' off"
+ cset "name='Speaker Channel Switch' off"
+
+ cset "name='Headphone Switch' on"
+ cset "name='Headphone Channel Switch' on"
+ # 25/39 higher values cause crackling on some boards
+ cset "name='Headphone Playback Volume' 25"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Headphone Switch' off"
+ cset "name='Headphone Channel Switch' off"
+ ]
+}
+
+SectionDevice."DMic".0 {
+ Comment "Internal Microphone"
+
+ Value {
+ CaptureChannels "2"
+ CapturePriority "150"
+ }
+
+ EnableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Int Mic Switch' on"
+
+ cset "name='Stereo1 DMIC Mux' DMIC1"
+ cset "name='Stereo1 ADC2 Mux' DMIC"
+ cset "name='Mono ADC L2 Mux' DMIC"
+ cset "name='Mono ADC R2 Mux' DMIC"
+
+ cset "name='Sto1 ADC MIXL ADC1 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC1 Switch' off"
+ cset "name='Sto1 ADC MIXL ADC2 Switch' on"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' on"
+ cset "name='Mono ADC MIXL ADC1 Switch' off"
+ cset "name='Mono ADC MIXR ADC1 Switch' off"
+ cset "name='Mono ADC MIXL ADC2 Switch' on"
+ cset "name='Mono ADC MIXR ADC2 Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Sto1 ADC MIXL ADC2 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' off"
+ cset "name='Mono ADC MIXL ADC2 Switch' off"
+ cset "name='Mono ADC MIXR ADC2 Switch' off"
+ cset "name='Int Mic Switch' off"
+ ]
+}
+
+SectionDevice."HSMic".0 {
+ Comment "Headset Microphone"
+
+ Value {
+ CaptureChannels "2"
+ JackControl "Headset Mic Jack"
+ JackHWMute "DMic"
+ }
+
+ EnableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Headset Mic Switch' on"
+
+ cset "name='Sto1 ADC MIXL ADC1 Switch' on"
+ cset "name='Sto1 ADC MIXR ADC1 Switch' on"
+ cset "name='Sto1 ADC MIXL ADC2 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' off"
+
+ cset "name='Mono ADC MIXL ADC1 Switch' on"
+ cset "name='Mono ADC MIXR ADC1 Switch' on"
+ cset "name='Mono ADC MIXL ADC2 Switch' off"
+ cset "name='Mono ADC MIXR ADC2 Switch' off"
+
+ cset "name='RECMIXL BST1 Switch' on"
+ cset "name='RECMIXR BST1 Switch' on"
+
+ ]
+
+ DisableSequence [
+ cdev "hw:chtrt5645"
+
+ cset "name='Headset Mic Switch' off"
+
+ cset "name='RECMIXL BST1 Switch' off"
+ cset "name='RECMIXR BST1 Switch' off"
+ cset "name='Sto1 ADC MIXL ADC1 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC1 Switch' off"
+ cset "name='Mono ADC MIXL ADC1 Switch' on"
+ cset "name='Mono ADC MIXR ADC1 Switch' on"
+
+ ]
+}
diff --git a/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile.am b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile.am
new file mode 100644
index 00000000..dd8b372a
--- /dev/null
+++ b/src/conf/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN
+ucm_DATA = ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am
index 3b4f13a8..e496ca89 100644
--- a/src/conf/ucm/Makefile.am
+++ b/src/conf/ucm/Makefile.am
@@ -1,4 +1,5 @@
SUBDIRS=\
+ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN \
broadwell-rt286 \
broxton-rt298 \
bytcr-rt5651 \
--
2.17.0
More information about the Alsa-devel
mailing list