[alsa-devel] simultaneous voice/data works (was Re: call/normal switch was Re: omap4-droid4: voice call support was)

[Tony Lindgren]

* Pavel Machek <pavel at ucw.cz> [180410 11:00]:
> On Mon 2018-04-09 07:08:47, Tony Lindgren wrote:
> > * Dan Williams <dcbw at redhat.com> [180408 02:46]:
> > > On Sat, 2018-04-07 at 14:22 +0200, Pavel Machek wrote:
> > > > I tried --location-enable-gps-unmanaged , but that did not work for
> > > > me.
> > > 
> > > That requires a TTY that would spit out the GPS data; in this mode MM
> > > only sends the start/stop commands, and what comes out the GPS TTY is
> > > undefined (at least by MM).
> > > 
> > > So unless you know that one of the 6600's TTYs does GPS and in what
> > > format it does GPS, then no.
> > 
> > There should be a NMEA port within the unknown port range ttyUSB[123].
> > 
> > Is there some easy way to enable --location-enable-gps-unmanaged for
> > testing so I can check if GPS gets enabled for one of the ports?
> 
> This should be userful for testing:
> 
> Just pass --pds-start-gps and you should get NMEA on stdout.

Hmm maybe also try to check if enabling the GPS this way starts
printing something out of /dev/ttyUSB[123]?

Regards,

Tony