[alsa-devel] [PATCH v2 05/13] soundwire: Add helpers for ports operations

Pierre-Louis Bossart pierre-louis.bossart at linux.intel.com
Fri Apr 6 01:27:59 CEST 2018


> +static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
> +			struct sdw_slave_runtime *s_rt,
> +			struct sdw_port_runtime *p_rt, bool prep)
> +{
> +	struct completion *port_ready = NULL;
> +	struct sdw_dpn_prop *dpn_prop;
> +	struct sdw_prepare_ch prep_ch;
> +	unsigned int time_left;
> +	bool intr = false;
> +	int ret = 0, val;
> +	u32 addr;
> +
> +	prep_ch.num = p_rt->num;
> +	prep_ch.ch_mask = p_rt->ch_mask;
> +
> +	dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave,
> +					s_rt->direction,
> +					prep_ch.num);
> +	if (!dpn_prop) {
> +		dev_err(bus->dev,
> +			"Slave Port:%d properties not found", prep_ch.num);
> +		return -EINVAL;
> +	}
> +
> +	prep_ch.prepare = prep;
> +
> +	prep_ch.bank = bus->params.next_bank;
> +
> +	if ((dpn_prop->device_interrupts) || (!dpn_prop->simple_ch_prep_sm))
> +		intr = true;
> +
> +	/*
> +	 * Enable interrupt before Port prepare.
> +	 * For Port de-prepare, it is assumed that port
> +	 * was prepared earlier
> +	 */
> +	if (prep && intr) {
> +		ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep,
> +						dpn_prop->device_interrupts);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	/* Inform slave about the impending port prepare */
> +	sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_PRE_PREP);
> +
> +	/* Prepare Slave port implementing CP_SM */
> +	if (!dpn_prop->simple_ch_prep_sm) {
> +		addr = SDW_DPN_PREPARECTRL(p_rt->num);
> +
> +		if (prep)
> +			ret = sdw_update(s_rt->slave, addr,
> +					0xFF, p_rt->ch_mask);
> +		else
> +			ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0);
> +
> +		if (ret < 0) {
> +			dev_err(&s_rt->slave->dev,
> +				"Slave prep_ctrl reg write failed");
> +			return ret;
> +		}
> +
> +		/* Wait for completion on port ready */
> +		port_ready = &s_rt->slave->port_ready[prep_ch.num];
> +		time_left = wait_for_completion_timeout(port_ready,
> +				msecs_to_jiffies(dpn_prop->ch_prep_timeout));
> +
> +		val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
> +		val &= p_rt->ch_mask;
> +		if (!time_left && !val) {

you sure about this? isn't it if (!time_left || val) ?
val is one for NotFinished.


> +			dev_err(&s_rt->slave->dev,
> +				"Chn prep failed for port:%d", prep_ch.num);
> +			return -ETIMEDOUT;
> +		}
> +	}
> +
> +	/* Inform slaves about ports being prepared */

about ports prepared.

> +	sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_POST_PREP);
> +
> +	/* Disable interrupt after Port de-prepare */
> +	if ((!prep) && (intr))
> +		ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep,
> +						dpn_prop->device_interrupts);
> +
> +	return ret;
> +}
> +
> +static int sdw_prep_deprep_mstr_ports(struct sdw_master_runtime *m_rt,
> +				struct sdw_port_runtime *p_rt, bool prep)
> +{
> +	struct sdw_transport_params *t_params = &p_rt->transport_params;
> +	struct sdw_bus *bus = m_rt->bus;
> +	const struct sdw_master_port_ops *ops = bus->port_ops;
> +	struct sdw_prepare_ch prep_ch;
> +	int ret = 0;
> +
> +	prep_ch.num = p_rt->num;
> +	prep_ch.ch_mask = p_rt->ch_mask;
> +	prep_ch.prepare = prep; /* Prepare/De-prepare */
> +	prep_ch.bank = bus->params.next_bank;
> +
> +	/* Pre-prepare/Pre-deprepare port(s) */
> +	if (ops->dpn_port_prep) {
> +		ret = ops->dpn_port_prep(bus, &prep_ch);
> +		if (ret < 0) {
> +			dev_err(bus->dev, "Port prepare failed for port:%d",
> +					t_params->port_num);
> +			return ret;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +/**
> + * sdw_prep_deprep_ports: Prepare/De-prepare port(s) for Master(s) and
> + * Slave(s)
> + *
> + * @m_rt: Master runtime handle
> + * @prep: Prepare or De-prepare
> + */
> +static int sdw_prep_deprep_ports(struct sdw_master_runtime *m_rt, bool prep)
> +{
> +	struct sdw_slave_runtime *s_rt = NULL;
> +	struct sdw_port_runtime *p_rt;
> +	int ret = 0;
> +
> +	/* Prepare/De-prepare Slave port(s) */
> +	list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
> +		list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
> +			ret = sdw_prep_deprep_slave_ports(m_rt->bus, s_rt,
> +							p_rt, prep);
> +			if (ret < 0)
> +				return ret;
> +		}
> +	}
> +
> +	/* Prepare/De-prepare Master port(s) */
> +	list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
> +		ret = sdw_prep_deprep_mstr_ports(m_rt, p_rt, prep);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +
>   /**
>    * sdw_release_stream: Free the assigned stream runtime
>    *
> diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
> index f2b952148e1a..fcec63c59ec0 100644
> --- a/include/linux/soundwire/sdw.h
> +++ b/include/linux/soundwire/sdw.h
> @@ -377,6 +377,37 @@ enum sdw_reg_bank {
>   };
>   
>   /**
> + * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel
> + *
> + * @num: Port number
> + * @ch_mask: Active channel mask
> + * @prepare: Prepare (true) /de-prepare (false) channel
> + * @bank: Register bank, which bank Slave/Master driver should program for
> + * implementation defined registers. This is always updated to next_bank
> + * value read from bus params.
> + *
> + */
> +struct sdw_prepare_ch {
> +	unsigned int num;
> +	unsigned int ch_mask;
> +	bool prepare;
> +	unsigned int bank;
> +};
> +
> +/**
> + * enum sdw_port_prep_ops: Prepare operations for Data Port
> + *
> + * @SDW_OPS_PORT_PRE_PREP: Pre prepare operation for the Port
> + * @SDW_OPS_PORT_PREP: Prepare operation for the Port
> + * @SDW_OPS_PORT_POST_PREP: Post prepare operation for the Port
> + */
> +enum sdw_port_prep_ops {
> +	SDW_OPS_PORT_PRE_PREP = 0,
> +	SDW_OPS_PORT_PREP = 1,
> +	SDW_OPS_PORT_POST_PREP = 2,
> +};
> +
> +/**
>    * struct sdw_bus_params: Structure holding bus configuration
>    *
>    * @curr_bank: Current bank in use (BANK0/BANK1)
> @@ -395,6 +426,7 @@ struct sdw_bus_params {
>    * @interrupt_callback: Device interrupt notification (invoked in thread
>    * context)
>    * @update_status: Update Slave status
> + * @port_prep: Prepare the port with parameters
>    */
>   struct sdw_slave_ops {
>   	int (*read_prop)(struct sdw_slave *sdw);
> @@ -402,6 +434,9 @@ struct sdw_slave_ops {
>   			struct sdw_slave_intr_status *status);
>   	int (*update_status)(struct sdw_slave *slave,
>   			enum sdw_slave_status status);
> +	int (*port_prep)(struct sdw_slave *slave,
> +			struct sdw_prepare_ch *prepare_ch,
> +			enum sdw_port_prep_ops pre_ops);
>   };
>   
>   /**
> @@ -506,6 +541,19 @@ struct sdw_transport_params {
>   };
>   
>   /**
> + * struct sdw_enable_ch: Enable/disable Data Port channel
> + *
> + * @num: Port number
> + * @ch_mask: Active channel mask
> + * @enable: Enable (true) /disable (false) channel
> + */
> +struct sdw_enable_ch {
> +	unsigned int num;

port_num then?

> +	unsigned int ch_mask;
> +	bool enable;
> +};
> +
> +/**
>    * struct sdw_master_port_ops: Callback functions from bus to Master
>    * driver to set Master Data ports.
>    *
> @@ -513,6 +561,8 @@ struct sdw_transport_params {
>    * Mandatory callback
>    * @dpn_set_port_transport_params: Set transport parameters for the Master
>    * Port. Mandatory callback
> + * @dpn_port_prep: Port prepare operations for the Master Data Port.
> + * @dpn_port_enable_ch: Enable the channels of Master Port.
>    */
>   struct sdw_master_port_ops {
>   	int (*dpn_set_port_params)(struct sdw_bus *bus,
> @@ -521,6 +571,10 @@ struct sdw_master_port_ops {
>   	int (*dpn_set_port_transport_params)(struct sdw_bus *bus,
>   			struct sdw_transport_params *transport_params,
>   			enum sdw_reg_bank bank);
> +	int (*dpn_port_prep)(struct sdw_bus *bus,
> +			struct sdw_prepare_ch *prepare_ch);
> +	int (*dpn_port_enable_ch)(struct sdw_bus *bus,
> +			struct sdw_enable_ch *enable_ch, unsigned int bank);
>   };
>   
>   struct sdw_msg;
> 



More information about the Alsa-devel mailing list