[alsa-devel] [PATCH 6/6] ASoC: Intel: kbl: Enable mclk and ssp sclk early

[Pierre-Louis Bossart]

> +static int platform_clock_control(struct snd_soc_dapm_widget *w,
> +			struct snd_kcontrol *k, int  event)
> +{
> +	struct snd_soc_dapm_context *dapm = w->dapm;
> +	struct snd_soc_card *card = dapm->card;
> +	struct kbl_rt5663_private *priv = snd_soc_card_get_drvdata(card);
> +
> +	clk_disable_unprepare(priv->mclk);
> +	clk_disable_unprepare(priv->sclk);
> +
> +	return 0;
> +}
> +
>   static const struct snd_soc_dapm_widget kabylake_widgets[] = {
>   	SND_SOC_DAPM_HP("Headphone Jack", NULL),
>   	SND_SOC_DAPM_MIC("Headset Mic", NULL),
> @@ -77,7 +95,8 @@ enum {
>   	SND_SOC_DAPM_SPK("HDMI1", NULL),
>   	SND_SOC_DAPM_SPK("HDMI2", NULL),
>   	SND_SOC_DAPM_SPK("HDMI3", NULL),
> -
> +	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
> +			platform_clock_control, SND_SOC_DAPM_POST_PMD),
[snip]
> +static int kabylake_enable_ssp_clks(struct snd_soc_card *card)
> +{
> +
> +	struct kbl_rt5663_private *priv = snd_soc_card_get_drvdata(card);
> +	int ret;
> +
> +	/* Enable MCLK */
> +	ret = clk_set_rate(priv->mclk, 24000000);
> +	if (ret < 0) {
> +		dev_err(card->dev, "Can't set rate for mclk, err: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(priv->mclk);
> +	if (ret < 0) {
> +		dev_err(card->dev, "Can't enable mclk, err: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Enable SCLK */
> +	ret = clk_set_rate(priv->sclk, 3072000);
> +	if (ret < 0) {
> +		dev_err(card->dev, "Can't set rate for sclk, err: %d\n", ret);
> +		clk_disable_unprepare(priv->mclk);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(priv->sclk);
> +	if (ret < 0) {
> +		dev_err(card->dev, "Can't enable sclk, err: %d\n", ret);
> +		clk_disable_unprepare(priv->mclk);
> +	}
> +
> +	return ret;
> +}
> +
>   static int kabylake_rt5663_hw_params(struct snd_pcm_substream *substream,
>   	struct snd_pcm_hw_params *params)
>   {
>   	struct snd_soc_pcm_runtime *rtd = substream->private_data;
>   	struct snd_soc_dai *codec_dai = rtd->codec_dai;
> +	struct snd_soc_card *card = rtd->card;
>   	int ret;
>   
> +	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
> +		ret = kabylake_enable_ssp_clks(card);

Is there a reason why the clocks need to be enabled in the hw_params() 
instead of platform_clock_control()?
The code is not symmetrical between enable/disable, is this intended? I 
remember seeing this in a different context (dialog codec?).