[alsa-devel] [PATCH 04/19] ASoC: don't use snd_soc_write/read on twl6040

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

twl6040 doesn't use regmap nor reg_cache. Its write/read are done
through twl6040_reg_write/read. This driver directly calling these
functions, but sometimes using snd_soc_write/read.
As part of cleanup, snd_soc_codec_driver::write, read will be
removed soon. Then, write/read access through snd_soc_write/read
will doesn't work on this driver, since it doesn't use regmap nor
reg_cache.
This patch replace snd_soc_write/read to twl6040_write/read.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 sound/soc/codecs/twl6040.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index a8e6941..3b895b4 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -543,7 +543,7 @@ int twl6040_get_dl1_gain(struct snd_soc_codec *codec)
 	if (snd_soc_dapm_get_pin_status(dapm, "HSOR") ||
 		snd_soc_dapm_get_pin_status(dapm, "HSOL")) {
 
-		u8 val = snd_soc_read(codec, TWL6040_REG_HSLCTL);
+		u8 val = twl6040_read(codec, TWL6040_REG_HSLCTL);
 		if (val & TWL6040_HSDACMODE)
 			/* HSDACL in LP mode */
 			return -8; /* -8dB */
@@ -1158,8 +1158,6 @@ static int twl6040_remove(struct snd_soc_codec *codec)
 static const struct snd_soc_codec_driver soc_codec_dev_twl6040 = {
 	.probe = twl6040_probe,
 	.remove = twl6040_remove,
-	.read = twl6040_read,
-	.write = twl6040_write,
 	.set_bias_level = twl6040_set_bias_level,
 	.suspend_bias_off = true,
 	.ignore_pmdown_time = true,
-- 
1.9.1