[alsa-devel] usb/sound/bcd2000: warning in bcd2000_init_device

[Greg Kroah-Hartman]

On Wed, Oct 04, 2017 at 10:08:24AM +0200, Takashi Iwai wrote:
> On Wed, 04 Oct 2017 09:52:36 +0200,
> Greg Kroah-Hartman wrote:
> > 
> > On Wed, Oct 04, 2017 at 08:10:59AM +0200, Takashi Iwai wrote:
> > > On Tue, 03 Oct 2017 19:42:21 +0200,
> > > Greg Kroah-Hartman wrote:
> > > > 
> > > > On Tue, Oct 03, 2017 at 12:50:08PM -0400, Alan Stern wrote:
> > > > > On Tue, 3 Oct 2017, Takashi Iwai wrote:
> > > > > 
> > > > > > > It's a dev_WARN because it indicates a potentially serious error in the 
> > > > > > > driver: The driver has submitted an interrupt URB to a bulk endpoint.  
> > > > > > > That may not sound bad, but the same check gets triggered if a driver 
> > > > > > > submits a bulk URB to an isochronous endpoint, or any other invalid 
> > > > > > > combination.
> > > > > > > 
> > > > > > > Most likely the explanation here is that the driver doesn't bother to
> > > > > > > check the endpoint type because it expects the endpoint will always be
> > > > > > > interrupt.  But that is not a safe strategy.  USB devices and their
> > > > > > > firmware should not be trusted unnecessarily.
> > > > > > > 
> > > > > > > The best fix is, like you said, to add a sanity check in the caller.
> > > > > > 
> > > > > > OK, but then do we have some handy helper for the check?
> > > > > > As other bug reports by syzkaller suggest, there are a few other
> > > > > > drivers that do the same, submitting a urb with naive assumption of
> > > > > > the fixed EP for specific devices.  In the end we'll need to put the
> > > > > > very same checks there in multiple places.
> > > > > 
> > > > > Perhaps we could add a helper routine that would take a list of 
> > > > > expected endpoint types and check that the actual endpoints match the 
> > > > > types.  But of course, all the drivers you're talking about would have 
> > > > > to add a call to this helper routine.
> > > > 
> > > > We have almost this type of function, usb_find_common_endpoints(),
> > > > what's wrong with using that?  Johan has already swept the tree and
> > > > added a lot of these checks, odds are no one looked at the sound/
> > > > subdir...
> > > 
> > > Well, what I had in my mind is just a snippet from usb_submit_urb(),
> > > something like:
> > > 
> > > bool usb_sanity_check_urb_pipe(struct urb *urb)
> > > {
> > > 	struct usb_host_endpoint *ep;
> > > 	int xfertype;
> > > 	static const int pipetypes[4] = {
> > > 		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
> > > 	};
> > > 
> > > 	ep = usb_pipe_endpoint(urb->dev, urb->pipe);
> > > 	xfertype = usb_endpoint_type(&ep->desc);
> > > 	return usb_pipetype(urb->pipe) != pipetypes[xfertype];
> > > }
> > > 
> > > And calling this before usb_submit_urb() in each place that assigns
> > > the fixed EP as device-specific quirks.
> > > Does it make sense?
> > 
> > Yes, kind of, but checking the endpoint type/direction is what you are
> > expecting it to be as you "know" what the type should be for each
> > driver as it is unique.
> 
> Yes, it can be simplified, but if we want a common helper function,
> this style would have an advantage that it can be used generically for
> all drivers.
> 
> > Anyway, a "real" patch might make more sense to me.
> 
> I can cook up a patch if you find it a good idea to add such a common
> function to usb core side.  OTOH, if each driver should open-code this
> in each place, I can work on that, too.  Which would you prefer?

A common function is good, open-coding is bad :)

Try it with a driver or two to see what it looks like?

thanks,

greg k-h