[alsa-devel] [PATCH v2 5/8] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin

Tony Lindgren tony at atomide.com
Thu Nov 30 17:18:26 CET 2017


* Andrew F. Davis <afd at ti.com> [171129 17:16]:
> The correct DT property for specifying a GPIO used for reset
> is "reset-gpios", fix this here.
> 
> Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board")

So it seems this and patch 8/8 are safe for me to pick separately?

Regards,

Tony

> Signed-off-by: Andrew F. Davis <afd at ti.com>
> ---
>  arch/arm/boot/dts/am335x-pepper.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
> index 03c7d77023c6..9fb7426070ce 100644
> --- a/arch/arm/boot/dts/am335x-pepper.dts
> +++ b/arch/arm/boot/dts/am335x-pepper.dts
> @@ -139,7 +139,7 @@
>  &audio_codec {
>  	status = "okay";
>  
> -	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
> +	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
>  	AVDD-supply = <&ldo3_reg>;
>  	IOVDD-supply = <&ldo3_reg>;
>  	DRVDD-supply = <&ldo3_reg>;
> -- 
> 2.15.0
> 


More information about the Alsa-devel mailing list