[alsa-devel] [PATCH v2 7/8] ARM: dts: imx: Fix the audio CODEC's reset pin

Andrew F. Davis afd at ti.com
Wed Nov 29 18:13:58 CET 2017


The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 50bffb78e2ee ("ARM: dts: imx: add Gateworks Ventana GW5903 support")

Signed-off-by: Andrew F. Davis <afd at ti.com>
---
 arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 444425153fc7..16299103a941 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -310,7 +310,7 @@
 	tlv320aic3105: codec at 18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
 		/* Regulators */
-- 
2.15.0



More information about the Alsa-devel mailing list