[alsa-devel] [PATCH 1/2] ASoC: nau8825: disable crosstalk by default

[Wu-Cheng Li (李務誠)]

On Fri, Nov 24, 2017 at 6:08 PM, John Hsu <KCHSU0 at nuvoton.com> wrote:
> The driver makes the crosstalk funciton disabled by default
> which can simplify the codec function. The platform may not
> need this funciton and reduce the potential risk. Therefore,
> We change the property "nuvoton,crosstalk-bypass" to
> "nuvoton,crosstalk-enable". The crosstalk measurement is enabled
> if the property is set. Otherwise, it is disabled. Besides,
> add more condition in the entry point of the crosstalk sequence
> to disable the function completely.
>
> Signed-off-by: John Hsu <KCHSU0 at nuvoton.com>
> ---
>  .../devicetree/bindings/sound/nau8825.txt          |  4 ++--
>  sound/soc/codecs/nau8825.c                         | 23 ++++++++++++----------
>  sound/soc/codecs/nau8825.h                         |  2 +-
>  3 files changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
> index 2f5e973..d16d968 100644
> --- a/Documentation/devicetree/bindings/sound/nau8825.txt
> +++ b/Documentation/devicetree/bindings/sound/nau8825.txt
> @@ -69,7 +69,7 @@ Optional properties:
>    - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
>    - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
>
> -  - nuvoton,crosstalk-bypass: make crosstalk function bypass if set.
> +  - nuvoton,crosstalk-enable: make crosstalk function enable if set.
>
>    - clocks: list of phandle and clock specifier pairs according to common clock bindings for the
>        clocks described in clock-names
> @@ -98,7 +98,7 @@ Example:
>        nuvoton,short-key-debounce = <2>;
>        nuvoton,jack-insert-debounce = <7>;
>        nuvoton,jack-eject-debounce = <7>;
> -      nuvoton,crosstalk-bypass;
> +      nuvoton,crosstalk-enable;
>
>        clock-names = "mclk";
>        clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
> diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
> index 714ce17..d3c1a02 100644
> --- a/sound/soc/codecs/nau8825.c
> +++ b/sound/soc/codecs/nau8825.c
> @@ -815,11 +815,12 @@ static void nau8825_xtalk_work(struct work_struct *work)
>
>  static void nau8825_xtalk_cancel(struct nau8825 *nau8825)
>  {
> -       /* If the xtalk_protect is true, that means the process is still
> -        * on going. The driver forces to cancel the cross talk task and
> +       /* If the crosstalk is eanbled and the process is on going,

s/eanbled/enabled/

> +        * the driver forces to cancel the crosstalk task and
>          * restores the configuration to original status.
>          */
> -       if (nau8825->xtalk_protect) {
> +       if (nau8825->xtalk_enable && nau8825->xtalk_state !=
> +               NAU8825_XTALK_DONE) {
>                 cancel_work_sync(&nau8825->xtalk_work);
>                 nau8825_xtalk_clean(nau8825);
>         }
> @@ -1686,7 +1687,7 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
>         } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) {
>                 if (nau8825_is_jack_inserted(regmap)) {
>                         event |= nau8825_jack_insert(nau8825);
> -                       if (!nau8825->xtalk_bypass && !nau8825->high_imped) {
> +                       if (nau8825->xtalk_enable && !nau8825->high_imped) {
>                                 /* Apply the cross talk suppression in the
>                                  * headset without high impedance.
>                                  */
> @@ -1732,8 +1733,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
>                         nau8825->xtalk_event_mask = event_mask;
>                 }
>         } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
> -               schedule_work(&nau8825->xtalk_work);
> -               clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
> +               if (nau8825->xtalk_enable) {
> +                       schedule_work(&nau8825->xtalk_work);
> +                       clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
> +               }

Shouldn't we still set clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ if
crosstalk is disabled?
Otherwise, all active_irq will be disabled later in this function.

>         } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) ==
>                 NAU8825_JACK_INSERTION_DETECTED) {
>                 /* One more step to check GPIO status directly. Thus, the
> @@ -2440,8 +2443,8 @@ static void nau8825_print_device_properties(struct nau8825 *nau8825)
>                         nau8825->jack_insert_debounce);
>         dev_dbg(dev, "jack-eject-debounce:  %d\n",
>                         nau8825->jack_eject_debounce);
> -       dev_dbg(dev, "crosstalk-bypass:     %d\n",
> -                       nau8825->xtalk_bypass);
> +       dev_dbg(dev, "crosstalk-enable:     %d\n",
> +                       nau8825->xtalk_enable);
>  }
>
>  static int nau8825_read_device_properties(struct device *dev,
> @@ -2506,8 +2509,8 @@ static int nau8825_read_device_properties(struct device *dev,
>                 &nau8825->jack_eject_debounce);
>         if (ret)
>                 nau8825->jack_eject_debounce = 0;
> -       nau8825->xtalk_bypass = device_property_read_bool(dev,
> -               "nuvoton,crosstalk-bypass");
> +       nau8825->xtalk_enable = device_property_read_bool(dev,
> +               "nuvoton,crosstalk-enable");
>
>         nau8825->mclk = devm_clk_get(dev, "mclk");
>         if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) {
> diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h
> index 8aee5c86..199d6ea 100644
> --- a/sound/soc/codecs/nau8825.h
> +++ b/sound/soc/codecs/nau8825.h
> @@ -476,7 +476,7 @@ struct nau8825 {
>         int xtalk_event_mask;
>         bool xtalk_protect;
>         int imp_rms[NAU8825_XTALK_IMM];
> -       int xtalk_bypass;
> +       int xtalk_enable;
>  };
>
>  int nau8825_enable_jack_detect(struct snd_soc_codec *codec,
> --
> 2.6.4
>