[alsa-devel] [PATCH 3/5] media: i2c: Add TDA1997x HDMI receiver driver
Hans Verkuil
hverkuil at xs4all.nl
Thu Nov 23 09:08:51 CET 2017
On 11/23/2017 05:27 AM, Tim Harvey wrote:
> On Mon, Nov 20, 2017 at 7:39 AM, Hans Verkuil <hverkuil at xs4all.nl> wrote:
>> Hi Tim,
>>
>> Some more review comments:
>>
>> On 11/09/2017 07:45 PM, Tim Harvey wrote:
>>> Add support for the TDA1997x HDMI receivers.
> <snip>
>>> + */
>>> +struct color_matrix_coefs {
>>> + const char *name;
>>> + /* Input offsets */
>>> + s16 offint1;
>>> + s16 offint2;
>>> + s16 offint3;
>>> + /* Coeficients */
>>> + s16 p11coef;
>>> + s16 p12coef;
>>> + s16 p13coef;
>>> + s16 p21coef;
>>> + s16 p22coef;
>>> + s16 p23coef;
>>> + s16 p31coef;
>>> + s16 p32coef;
>>> + s16 p33coef;
>>> + /* Output offsets */
>>> + s16 offout1;
>>> + s16 offout2;
>>> + s16 offout3;
>>> +};
>>> +
>>> +enum {
>>> + ITU709_RGBLIMITED,
>>> + ITU709_RGBFULL,
>>> + ITU601_RGBLIMITED,
>>> + ITU601_RGBFULL,
>>> + RGBLIMITED_RGBFULL,
>>> + RGBLIMITED_ITU601,
>>> + RGBFULL_ITU601,
>>
>> This can't be right.
>> ITU709_RGBLIMITED
>> You have these conversions:
>>
>> ITU709_RGBFULL
>> ITU601_RGBFULL
>> RGBLIMITED_RGBFULL
>> RGBLIMITED_ITU601
>> RGBFULL_ITU601
>> RGBLIMITED_ITU709
>> RGBFULL_ITU709
>>
>> I.e. on the HDMI receiver side you can receive RGB full/limited or ITU601/709.
>> On the output side you have RGB full or ITU601/709.
>>
>> So something like ITU709_RGBLIMITED makes no sense.
>>
>
> I misunderstood the V4L2_CID_DV_RX_RGB_RANGE thinking that it allowed
> you to configure the output range. If output to the SoC is only ever
> full quant range for RGB then I can drop the
> ITU709_RGBLIMITED/ITU601_RGBLIMITED conversions.
Output for RGB is always full range. The reason is simply that the V4L2 API
has no way of selecting the quantization range it wants to receive. I made
a patch for that a few years back, but there really is no demand for it (yet).
Userspace expects full range RGB and limited range YUV.
>
> However, If the output is YUV how do I know if I need to convert to
> ITU709 or ITU601 and what are my conversion matrices for
> RGBLIMITED_ITU709/RGBFULL_ITU709?
You can choose yourself whether you convert to YUV 601 or 709. I would
recommend to use 601 for SDTV resolutions (i.e. width/height <= 720x576)
and 709 for HDTV.
I made a little program that calculates the values for RGB lim/full to
YUV 601/709:
-------------------------------------
#include <stdlib.h>
#include <stdio.h>
#define COEFF(v, r) ((v) * (r) * 16.0)
static const double bt601[3][3] = {
{ COEFF(0.299, 219), COEFF(0.587, 219), COEFF(0.114, 219) },
{ COEFF(-0.1687, 224), COEFF(-0.3313, 224), COEFF(0.5, 224) },
{ COEFF(0.5, 224), COEFF(-0.4187, 224), COEFF(-0.0813, 224) },
};
static const double rec709[3][3] = {
{ COEFF(0.2126, 219), COEFF(0.7152, 219), COEFF(0.0722, 219) },
{ COEFF(-0.1146, 224), COEFF(-0.3854, 224), COEFF(0.5, 224) },
{ COEFF(0.5, 224), COEFF(-0.4542, 224), COEFF(-0.0458, 224) },
};
int main(int argc, char **argv)
{
int i, j;
int mapi[] = { 0, 2, 1 };
int mapj[] = { 1, 0, 2 };
printf("rgb full -> 601\n");
printf(" 0, 0, 0,\n");
for (i = 0; i < 3; i++) {
for (j = 0; j < 3; j++) {
printf("%5d, ", (int)(0.5 + bt601[mapi[i]][mapj[j]]));
}
printf("\n");
}
printf(" 256, 2048, 2048,\n\n");
printf("rgb lim -> 601\n");
printf(" -256, -256, -256,\n");
for (i = 0; i < 3; i++) {
for (j = 0; j < 3; j++) {
printf("%5d, ", (int)(0.5 + 255.0 / 219.0 * bt601[mapi[i]][mapj[j]]));
}
printf("\n");
}
printf(" 256, 2048, 2048,\n\n");
printf("rgb full -> 709\n");
printf(" 0, 0, 0,\n");
for (i = 0; i < 3; i++) {
for (j = 0; j < 3; j++) {
printf("%5d, ", (int)(0.5 + rec709[mapi[i]][mapj[j]]));
}
printf("\n");
}
printf(" 256, 2048, 2048,\n\n");
printf("rgb lim -> 709\n");
printf(" -256, -256, -256,\n");
for (i = 0; i < 3; i++) {
for (j = 0; j < 3; j++) {
printf("%5d, ", (int)(0.5 + 255.0 / 219.0 * rec709[mapi[i]][mapj[j]]));
}
printf("\n");
}
printf(" 256, 2048, 2048,\n\n");
return 0;
}
-------------------------------------
This should give you the needed matrices. It's up to you whether to keep the
existing matrices for 601 or replace them with these. Probably best to keep
them.
>
> Sorry for all the questions, the colorspace/colorimetry options
> confuse the heck out of me.
>
>>> +};
>>> +
> <snip>
>>> +
>>> +/* parse an infoframe and do some sanity checks on it */
>>> +static unsigned int
>>> +tda1997x_parse_infoframe(struct tda1997x_state *state, u16 addr)
>>> +{
>>> + struct v4l2_subdev *sd = &state->sd;
>>> + union hdmi_infoframe frame;
>>> + u8 buffer[40];
>>> + u8 reg;
>>> + int len, err;
>>> +
>>> + /* read data */
>>> + len = io_readn(sd, addr, sizeof(buffer), buffer);
>>> + err = hdmi_infoframe_unpack(&frame, buffer);
>>> + if (err) {
>>> + v4l_err(state->client,
>>> + "failed parsing %d byte infoframe: 0x%04x/0x%02x\n",
>>> + len, addr, buffer[0]);
>>> + return err;
>>> + }
>>> + hdmi_infoframe_log(KERN_INFO, &state->client->dev, &frame);
>>> + switch (frame.any.type) {
>>> + /* Audio InfoFrame: see HDMI spec 8.2.2 */
>>> + case HDMI_INFOFRAME_TYPE_AUDIO:
>>> + /* sample rate */
>>> + switch (frame.audio.sample_frequency) {
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_32000:
>>> + state->audio_samplerate = 32000;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_44100:
>>> + state->audio_samplerate = 44100;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_48000:
>>> + state->audio_samplerate = 48000;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_88200:
>>> + state->audio_samplerate = 88200;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_96000:
>>> + state->audio_samplerate = 96000;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_176400:
>>> + state->audio_samplerate = 176400;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_192000:
>>> + state->audio_samplerate = 192000;
>>> + break;
>>> + default:
>>> + case HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM:
>>> + break;
>>> + }
>>> +
>>> + /* sample size */
>>> + switch (frame.audio.sample_size) {
>>> + case HDMI_AUDIO_SAMPLE_SIZE_16:
>>> + state->audio_samplesize = 16;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_SIZE_20:
>>> + state->audio_samplesize = 20;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_SIZE_24:
>>> + state->audio_samplesize = 24;
>>> + break;
>>> + case HDMI_AUDIO_SAMPLE_SIZE_STREAM:
>>> + default:
>>> + break;
>>> + }
>>> +
>>> + /* Channel Count */
>>> + state->audio_channels = frame.audio.channels;
>>> + if (frame.audio.channel_allocation &&
>>> + frame.audio.channel_allocation != state->audio_ch_alloc) {
>>> + /* use the channel assignment from the infoframe */
>>> + state->audio_ch_alloc = frame.audio.channel_allocation;
>>> + tda1997x_configure_audout(sd, state->audio_ch_alloc);
>>> + /* reset the audio FIFO */
>>> + tda1997x_hdmi_info_reset(sd, RESET_AUDIO, false);
>>> + }
>>> + break;
>>> +
>>> + /* Auxiliary Video information (AVI) InfoFrame: see HDMI spec 8.2.1 */
>>> + case HDMI_INFOFRAME_TYPE_AVI:
>>> + state->colorspace = frame.avi.colorspace;
>>> + state->colorimetry = frame.avi.colorimetry;
>>> + state->range = frame.avi.quantization_range;
>>
>> This should be ignored if it is overridden by the RGB Quantization Range
>> control, or am I missing something?
>>
>
> Ok. Sounds like I should only use the range from the infoframe if
> range == V4L2_DV_RGB_RANGE_AUTO:
>
> /* Quantization Range */
> if (state->range == V4L2_DV_RGB_RANGE_AUTO)
> state->range = frame.avi.quantization_range;
Huh? You're mixing V4L2_DV_RGB_* defines with HDMI_QUANTIZATION_RANGE_*
defines.
You probably mean to check the control value here.
> if (state->range == HDMI_QUANTIZATION_RANGE_DEFAULT) {
> if (frame.avi.video_code <= 1)
> state->range = HDMI_QUANTIZATION_RANGE_FULL;
> else
> state->range = HDMI_QUANTIZATION_RANGE_LIMITED;
> }
>
>
>>> + state->content = frame.avi.content_type;
>>> + /*
>>> + * If colorimetry not specified, conversion depends on res type:
>>> + * - SDTV: ITU601 for SD (480/576/240/288 line resolution)
>>> + * - HDTV: ITU709 for HD (720/1080 line resolution)
>>> + * - PC: sRGB
>>> + * see HDMI specification section 6.7
>>> + */
>>> + if ((state->colorspace == HDMI_COLORSPACE_YUV422 ||
>>> + state->colorspace == HDMI_COLORSPACE_YUV444) &&
>>> + (state->colorimetry == HDMI_COLORIMETRY_EXTENDED ||
>>> + state->colorimetry == HDMI_COLORIMETRY_NONE)) {
>>> + switch (state->timings.bt.height) {
>>> + case 480:
>>> + case 576:
>>> + case 240:
>>> + case 288:
>>> + state->colorimetry = HDMI_COLORIMETRY_ITU_601;
>>> + break;
>>> + case 720:
>>> + case 1080:
>>> + state->colorimetry = HDMI_COLORIMETRY_ITU_709;
>>> + break;
>>> + default:
>>> + state->colorimetry = HDMI_COLORIMETRY_NONE;
>>> + break;
>>> + }
>>> + }
>>> + /* if range not specified */
>>> + if (state->range == HDMI_QUANTIZATION_RANGE_DEFAULT) {
>>> + if (frame.avi.video_code == 0)
>>
>> This should be:
>>
>> if (frame.avi.video_code <= 1)
>>
>> VIC code 1 (VGA) is also full range. It's an exception to the rule.
>
> ok
>
> Thanks,
>
> Tim
>
Regards,
Hans
More information about the Alsa-devel
mailing list