[alsa-devel] [PATCH] ASoC: nau8825: disable crosstalk by default
John Hsu
KCHSU0 at nuvoton.com
Thu Nov 23 08:26:08 CET 2017
On 11/23/2017 12:43 PM, Wu-Cheng Li (李務誠) wrote:
> On Thu, Nov 23, 2017 at 11:19 AM, John Hsu <KCHSU0 at nuvoton.com> wrote:
>> The driver makes the crosstalk funciton disabled by default
>> which can simplify the codec function. The platform may not
>> need this funciton and reduce the potential risk. Therefore,
>> We change the property "nuvoton,crosstalk-bypass" to
>> "nuvoton,crosstalk-enable". The crosstalk measurement is enabled
>> if the property is set. Otherwise, it is disabled. Besides,
>> add more condition in the entry point of the crosstalk sequence
>> to disable the function completely.
>>
>> Signed-off-by: John Hsu <KCHSU0 at nuvoton.com>
>> ---
>> Documentation/devicetree/bindings/sound/nau8825.txt | 4 ++--
>> sound/soc/codecs/nau8825.c | 21 +++++++++++++--------
>> sound/soc/codecs/nau8825.h | 2 +-
>> 3 files changed, 16 insertions(+), 11 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
>> index 2f5e973..d16d968 100644
>> --- a/Documentation/devicetree/bindings/sound/nau8825.txt
>> +++ b/Documentation/devicetree/bindings/sound/nau8825.txt
>> @@ -69,7 +69,7 @@ Optional properties:
>> - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
>> - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
>>
>> - - nuvoton,crosstalk-bypass: make crosstalk function bypass if set.
>> + - nuvoton,crosstalk-enable: make crosstalk function enable if set.
>>
>> - clocks: list of phandle and clock specifier pairs according to common clock bindings for the
>> clocks described in clock-names
>> @@ -98,7 +98,7 @@ Example:
>> nuvoton,short-key-debounce = <2>;
>> nuvoton,jack-insert-debounce = <7>;
>> nuvoton,jack-eject-debounce = <7>;
>> - nuvoton,crosstalk-bypass;
>> + nuvoton,crosstalk-enable;
>>
>> clock-names = "mclk";
>> clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
>> diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
>> index 714ce17..2d6c536 100644
>> --- a/sound/soc/codecs/nau8825.c
>> +++ b/sound/soc/codecs/nau8825.c
>> @@ -792,6 +792,10 @@ static void nau8825_xtalk_work(struct work_struct *work)
>> struct nau8825 *nau8825 = container_of(
>> work, struct nau8825, xtalk_work);
>>
>> + /* block when crosstalk disabled */
>> + if (!nau8825->xtalk_enable)
> This can only happen when NAU8825_IMPEDANCE_MEAS_IRQ is triggered.
> I suggest moving the check to nau8825_interrupt(). Do not schedule a work
> if xtalk_enable is false.
The condition check also exists in nau8825_interrupt. It's indeed
redundant here, but just for accident.
>> + return;
>> +
>> nau8825_xtalk_measure(nau8825);
>> /* To determine the cross talk side tone gain when reach
>> * the impedance measure state.
>> @@ -815,11 +819,12 @@ static void nau8825_xtalk_work(struct work_struct *work)
>>
>> static void nau8825_xtalk_cancel(struct nau8825 *nau8825)
>> {
>> - /* If the xtalk_protect is true, that means the process is still
>> - * on going. The driver forces to cancel the cross talk task and
>> + /* If the crosstalk is eanbled and the process is on going,
>> + * the driver forces to cancel the cross talk task and
>> * restores the configuration to original status.
>> */
>> - if (nau8825->xtalk_protect) {
>> + if (nau8825->xtalk_enable && nau8825->xtalk_protect &&
>> + nau8825->xtalk_state != NAU8825_XTALK_DONE) {
> Do we need to check xtalk_state? It looks like xtalk_state won't be
> NAU8825_XTALK_DONE if xtalk_protect is true.
Suppose the crosstalk is enabled. In normal case, the jack insertion
and crosstalk measurement is on going. The xtalk_protect can present
the action and do recovery if the measurement is cancelled on the way.
In the case, the xtalk_state check just add the limitation where the
recovery is unnecessary when the crosstalk is in done state.
But the xtalk_state check also works when resume. After resume, the
xtalk_protect flag will also been raised for the protection of jack
detection from playback. But the codec will detect both insetion and
ejection. If the jack ejects, the eject interruption will happen and
go to the cancel function. The xtalk_state check can avoid the
recovery.
>> cancel_work_sync(&nau8825->xtalk_work);
>> nau8825_xtalk_clean(nau8825);
>> }
>> @@ -1686,7 +1691,7 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
>> } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) {
>> if (nau8825_is_jack_inserted(regmap)) {
>> event |= nau8825_jack_insert(nau8825);
>> - if (!nau8825->xtalk_bypass && !nau8825->high_imped) {
>> + if (nau8825->xtalk_enable && !nau8825->high_imped) {
>> /* Apply the cross talk suppression in the
>> * headset without high impedance.
>> */
>> @@ -2440,8 +2445,8 @@ static void nau8825_print_device_properties(struct nau8825 *nau8825)
>> nau8825->jack_insert_debounce);
>> dev_dbg(dev, "jack-eject-debounce: %d\n",
>> nau8825->jack_eject_debounce);
>> - dev_dbg(dev, "crosstalk-bypass: %d\n",
>> - nau8825->xtalk_bypass);
>> + dev_dbg(dev, "crosstalk-enable: %d\n",
>> + nau8825->xtalk_enable);
>> }
>>
>> static int nau8825_read_device_properties(struct device *dev,
>> @@ -2506,8 +2511,8 @@ static int nau8825_read_device_properties(struct device *dev,
>> &nau8825->jack_eject_debounce);
>> if (ret)
>> nau8825->jack_eject_debounce = 0;
>> - nau8825->xtalk_bypass = device_property_read_bool(dev,
>> - "nuvoton,crosstalk-bypass");
>> + nau8825->xtalk_enable = device_property_read_bool(dev,
>> + "nuvoton,crosstalk-enable");
>>
>> nau8825->mclk = devm_clk_get(dev, "mclk");
>> if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) {
>> diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h
>> index 8aee5c86..199d6ea 100644
>> --- a/sound/soc/codecs/nau8825.h
>> +++ b/sound/soc/codecs/nau8825.h
>> @@ -476,7 +476,7 @@ struct nau8825 {
>> int xtalk_event_mask;
>> bool xtalk_protect;
>> int imp_rms[NAU8825_XTALK_IMM];
>> - int xtalk_bypass;
>> + int xtalk_enable;
>> };
>>
>> int nau8825_enable_jack_detect(struct snd_soc_codec *codec,
>> --
>> 2.6.4
>>
===========================================================================================
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
More information about the Alsa-devel
mailing list