[alsa-devel] [PATCH 7/9] ARM: dts: omap3-n900: Fix the audio CODEC's reset pin

[Andrew F. Davis]

The correct DT property for specifying a GPIO used for reset
is "reset-gpio", fix this here.

Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support")

Signed-off-by: Andrew F. Davis <afd at ti.com>
---
 arch/arm/boot/dts/omap3-n900.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4acd32a1c4ef..6fbe6e095c3f 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -558,7 +558,7 @@
 	tlv320aic3x: tlv320aic3x at 18 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpio = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 		ai3x-gpio-func = <
 			0 /* AIC3X_GPIO1_FUNC_DISABLED */
 			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -575,7 +575,7 @@
 	tlv320aic3x_aux: tlv320aic3x at 19 {
 		compatible = "ti,tlv320aic3x";
 		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		reset-gpio = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
 
 		AVDD-supply = <&vmmc2>;
 		DRVDD-supply = <&vmmc2>;
-- 
2.15.0