[alsa-devel] [PATCH] ASoC: remove NULL pointer check for clk_disable_unprepare
Masahiro Yamada
yamada.masahiro at socionext.com
Sat May 20 20:42:10 CEST 2017
Hi Krzysztof,
2017-05-21 3:04 GMT+09:00 Krzysztof Kozlowski <krzk at kernel.org>:
> On Sun, May 21, 2017 at 02:42:38AM +0900, Masahiro Yamada wrote:
>> After long term efforts of fixing non-common clock implementations,
>> clk_disable() is a no-op for a NULL pointer input, and this is now
>> tree-wide consistent.
>>
>> All clock consumers can safely call clk_disable(_unprepare) without
>> NULL pointer check.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
>> ---
>>
>> sound/soc/codecs/adau17x1.c | 3 +--
>> sound/soc/codecs/da7213.c | 3 +--
>> sound/soc/codecs/da7218.c | 3 +--
>> sound/soc/codecs/da7219-aad.c | 5 ++---
>> sound/soc/codecs/da7219.c | 3 +--
>> sound/soc/codecs/es8328.c | 3 +--
>> sound/soc/codecs/wm8731.c | 3 +--
>> sound/soc/davinci/davinci-evm.c | 3 +--
>> sound/soc/fsl/imx-audmux.c | 6 ++----
>> sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
>> sound/soc/intel/boards/cht_bsw_rt5645.c | 3 +--
>> sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 6 ++----
>> sound/soc/samsung/i2s.c | 3 +--
>> 13 files changed, 16 insertions(+), 30 deletions(-)
>>
>
> (...)
>
>> diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
>> index af3ba4d..3a06acd 100644
>> --- a/sound/soc/samsung/i2s.c
>> +++ b/sound/soc/samsung/i2s.c
>> @@ -1122,8 +1122,7 @@ static int i2s_runtime_suspend(struct device *dev)
>> i2s->suspend_i2scon = readl(i2s->addr + I2SCON);
>> i2s->suspend_i2spsr = readl(i2s->addr + I2SPSR);
>>
>> - if (i2s->op_clk)
>> - clk_disable_unprepare(i2s->op_clk);
>> + clk_disable_unprepare(i2s->op_clk);
>> clk_disable_unprepare(i2s->clk);
>
> I think the check in i2s_runtime_resume() should be removed then as well
> to keep it symmetrical. Otherwise it looks suspicious.
Hmm, you have a point. We will lose the symmetry.
If samsung/i2s.c is only used with the common clock framework,
we can omit the NULL pointer check for clk_prepare_enable()
because it is also a no-op for NULL clk input
(it returns 0).
At this moment, this is not consistent for non-common clock implementations,
though.
--
Best Regards
Masahiro Yamada
More information about the Alsa-devel
mailing list