[alsa-devel] [PATCH RFC 01/26] ALSA: hda - Simplify bound-beep mute control for ALC268
Takashi Iwai
tiwai at suse.de
Thu May 11 23:09:00 CEST 2017
The beep mute switch for ALC268 needs to touch two NIDs, and we used
to apply the bind-mixer stuff. But the use case for ALC268 is fairly
easy to convert to an open-code in a shorter form. Since this is the
only user of the bind-ctls, we can clean up the common helper codes
later.
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
sound/pci/hda/patch_realtek.c | 37 ++++++++++++++++++++++++++++---------
1 file changed, 28 insertions(+), 9 deletions(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 58df440013c5..87e1368de4d5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2573,18 +2573,37 @@ static int patch_alc262(struct hda_codec *codec)
* ALC268
*/
/* bind Beep switches of both NID 0x0f and 0x10 */
-static const struct hda_bind_ctls alc268_bind_beep_sw = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x0f, 3, 1, HDA_INPUT),
- HDA_COMPOSE_AMP_VAL(0x10, 3, 1, HDA_INPUT),
- 0
- },
-};
+static int alc268_beep_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned long pval;
+ int err;
+
+ mutex_lock(&codec->control_mutex);
+ pval = kcontrol->private_value;
+ kcontrol->private_value = (pval & ~0xff) | 0x0f;
+ err = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+ if (err >= 0) {
+ kcontrol->private_value = (pval & ~0xff) | 0x10;
+ err = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+ }
+ kcontrol->private_value = pval;
+ mutex_unlock(&codec->control_mutex);
+ return err;
+}
static const struct snd_kcontrol_new alc268_beep_mixer[] = {
HDA_CODEC_VOLUME("Beep Playback Volume", 0x1d, 0x0, HDA_INPUT),
- HDA_BIND_SW("Beep Playback Switch", &alc268_bind_beep_sw),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Beep Playback Switch",
+ .subdevice = HDA_SUBDEV_AMP_FLAG,
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = alc268_beep_switch_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x0f, 3, 1, HDA_INPUT)
+ },
{ }
};
--
2.12.2
More information about the Alsa-devel
mailing list