[alsa-devel] [PATCH] streamline TLV320AIC23 drivers

[Jens Rottmann]

Hi Rob,
sorry for the delay.

> On Fri, Apr 21, 2017 at 09:22:02PM +0200, Jens Rottmann wrote:
>> - Remove Eukrea naming, i.MX is from Freescale, TLV320AIC23 is from TI,
>>   driver was written by Eukrea, but it's DT capable, so it's not exclusive:
>>   - Kconfig option title
>>   - 'model' option
>>   - driver 'compatible' string
>> [...]
>> CONFIG variable and files have not been renamed, though, so no need to
>> change old defconfigs.

On 04/28/2017 19:11, Rob Herring answered:
> Perhaps change the filename. [...]

I wanted to avoid the churn, but ok. In that case:

Do you want me to change all indentifiers inside driver, too?
eukrea_tlv320_probe() --> imx_tlv320aic23_probe()

Do you want me to also rename the CONFIG var?
CONFIG_SND_SOC_EUKREA_TLV320 --> CONFIG_SND_SOC_IMX_TLV320
I'd adapt in-tree defconfigs, but would unavoidably break
out-of-tree defconfigs...

>> -  - fsl,mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX).
>> +  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX).
>> +  - fsl,mux-int-port	: Dito, deprecated.
>> -  - fsl,mux-ext-port	: The external port of the i.MX audio muxer.
>> +  - mux-ext-port	: The external port of the i.MX audio muxer.
>> +  - fsl,mux-ext-port	: Dito, deprecated.

> Is this used elsewhere? This is FSL specific, so you should keep the
> prefix.

.../sound/soc/fsl$ egrep 'property.*mux-(int|ext)-port' *
eukrea-tlv320.c: ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port);
eukrea-tlv320.c: ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port);
fsl-asoc-card.c: ret = of_property_read_u32(np, "mux-int-port", &int_port);
fsl-asoc-card.c: ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
imx-es8328.c:    ret = of_property_read_u32(np, "mux-int-port", &int_port);
imx-es8328.c:    ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
imx-sgtl5000.c:  ret = of_property_read_u32(np, "mux-int-port", &int_port);
imx-sgtl5000.c:  ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
imx-wm8962.c:    ret = of_property_read_u32(np, "mux-int-port", &int_port);
imx-wm8962.c:    ret = of_property_read_u32(np, "mux-ext-port", &ext_port);

All drivers use mux-int|ext-port without prefix, tlv320 is the only
odd driver out, that's why I did this streamlining patch in the 1st place.

I would rather not have to change all other drivers to match the tlv320 one.

Thanks,
Jens