[alsa-devel] [PATCH v2 02/11] ASoC: Intel: Skylake: Use the sig_bits to define dai bps capability
jeeja.kp at intel.com
jeeja.kp at intel.com
Fri Mar 24 18:40:25 CET 2017
From: Jeeja KP <jeeja.kp at intel.com>
For calculating the HDA DMA format, use the max_bps supported by the
DAI caps instead of fixing it to 32/24. For host DMA the Max bps support
is 32, but in case of link DMA, this depends on the codec capability.
So use the sig_bits to define the bps supported by dai.
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
---
sound/soc/intel/skylake/skl-pcm.c | 25 ++++++++++++++++++++++---
sound/soc/intel/skylake/skl-topology.c | 2 ++
sound/soc/intel/skylake/skl-topology.h | 2 ++
3 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 2f90bc4..3c61dba 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -155,7 +155,7 @@ int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params)
snd_hdac_ext_stream_decouple(ebus, stream, true);
format_val = snd_hdac_calc_stream_format(params->s_freq,
- params->ch, params->format, 32, 0);
+ params->ch, params->format, params->host_bps, 0);
dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n",
format_val, params->s_freq, params->ch, params->format);
@@ -190,8 +190,8 @@ int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params)
stream = stream_to_hdac_ext_stream(hstream);
snd_hdac_ext_stream_decouple(ebus, stream, true);
- format_val = snd_hdac_calc_stream_format(params->s_freq,
- params->ch, params->format, 24, 0);
+ format_val = snd_hdac_calc_stream_format(params->s_freq, params->ch,
+ params->format, params->link_bps, 0);
dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n",
format_val, params->s_freq, params->ch, params->format);
@@ -309,6 +309,11 @@ static int skl_pcm_hw_params(struct snd_pcm_substream *substream,
p_params.host_dma_id = dma_id;
p_params.stream = substream->stream;
p_params.format = params_format(params);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ p_params.host_bps = dai->driver->playback.sig_bits;
+ else
+ p_params.host_bps = dai->driver->capture.sig_bits;
+
m_cfg = skl_tplg_fe_get_cpr_module(dai, p_params.stream);
if (m_cfg)
@@ -547,6 +552,11 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
p_params.link_index = link->index;
p_params.format = params_format(params);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ p_params.link_bps = codec_dai->driver->playback.sig_bits;
+ else
+ p_params.link_bps = codec_dai->driver->capture.sig_bits;
+
return skl_tplg_be_update_params(dai, &p_params);
}
@@ -652,6 +662,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_8000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
.capture = {
.stream_name = "System Capture",
@@ -659,6 +670,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_STEREO,
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -670,6 +682,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_QUAD,
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -681,6 +694,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_STEREO,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -692,6 +706,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_STEREO,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -703,6 +718,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_QUAD,
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -718,6 +734,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
},
{
@@ -733,6 +750,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
},
{
@@ -748,6 +766,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
},
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index c6bd4bb..43f9cb3 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -1242,10 +1242,12 @@ static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg,
case SKL_DEVICE_HDALINK:
pipe->p_params->link_dma_id = params->link_dma_id;
pipe->p_params->link_index = params->link_index;
+ pipe->p_params->link_bps = params->link_bps;
break;
case SKL_DEVICE_HDAHOST:
pipe->p_params->host_dma_id = params->host_dma_id;
+ pipe->p_params->host_bps = params->host_bps;
break;
default:
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
index fefab0e..bf2c63b 100644
--- a/sound/soc/intel/skylake/skl-topology.h
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -257,6 +257,8 @@ struct skl_pipe_params {
snd_pcm_format_t format;
int link_index;
int stream;
+ unsigned int host_bps;
+ unsigned int link_bps;
};
struct skl_pipe {
--
2.5.0
More information about the Alsa-devel
mailing list