[alsa-devel] [PATCH] streamline TLV320AIC23 drivers

Jens Rottmann JRottm at gmx.de
Fri Jun 2 23:22:05 CEST 2017


Hi Rob,
repeatedly got no response. Assuming all my mails got blocked, so moved to yet another account. Hope I'll get through this time.
Regards, Jens

-------- Original Message --------
Subject: Re: [PATCH] streamline TLV320AIC23 drivers
Date: Sat, 6 May 2017 00:39:20 +0200
From: Jens Rottmann <JRottm at yahoo.com>
To: Rob Herring
CC: Mark Rutland, Jaroslav Kysela, Takashi Iwai, alsa-devel at alsa-project.org, devicetree at vger.kernel.org, linux-kernel at vger.kernel.org, Liam Girdwood, Mark Brown

Hi Rob,
sorry for the delay.

> On Fri, Apr 21, 2017 at 09:22:02PM +0200, Jens Rottmann wrote:
>> - Remove Eukrea naming, i.MX is from Freescale, TLV320AIC23 is from TI,
>>   driver was written by Eukrea, but it's DT capable, so it's not exclusive:
>>   - Kconfig option title
>>   - 'model' option
>>   - driver 'compatible' string
>> [...]
>> CONFIG variable and files have not been renamed, though, so no need to
>> change old defconfigs.

On 04/28/2017 19:11, Rob Herring answered:
> Perhaps change the filename. [...]

I wanted to avoid the churn, but ok. In that case:

Do you want me to change all indentifiers inside driver, too?
eukrea_tlv320_probe() --> imx_tlv320aic23_probe()

Do you want me to also rename the CONFIG var?
CONFIG_SND_SOC_EUKREA_TLV320 --> CONFIG_SND_SOC_IMX_TLV320
I'd adapt in-tree defconfigs, but would unavoidably break
out-of-tree defconfigs...

>> -  - fsl,mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX).
>> +  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX).
>> +  - fsl,mux-int-port	: Dito, deprecated.
>> -  - fsl,mux-ext-port	: The external port of the i.MX audio muxer.
>> +  - mux-ext-port	: The external port of the i.MX audio muxer.
>> +  - fsl,mux-ext-port	: Dito, deprecated.

> Is this used elsewhere? This is FSL specific, so you should keep the
> prefix.

.../sound/soc/fsl$ egrep 'property.*mux-(int|ext)-port' *
eukrea-tlv320.c: ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port);
eukrea-tlv320.c: ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port);
fsl-asoc-card.c: ret = of_property_read_u32(np, "mux-int-port", &int_port);
fsl-asoc-card.c: ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
imx-es8328.c:    ret = of_property_read_u32(np, "mux-int-port", &int_port);
imx-es8328.c:    ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
imx-sgtl5000.c:  ret = of_property_read_u32(np, "mux-int-port", &int_port);
imx-sgtl5000.c:  ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
imx-wm8962.c:    ret = of_property_read_u32(np, "mux-int-port", &int_port);
imx-wm8962.c:    ret = of_property_read_u32(np, "mux-ext-port", &ext_port);

All drivers use mux-int|ext-port without prefix, tlv320 is the only
odd driver out, that's why I did this streamlining patch in the 1st place.

I would rather not have to change all other drivers to match the tlv320 one.

Thanks,
Jens


More information about the Alsa-devel mailing list