[alsa-devel] [PATCH 2/2] ASoC: tlv320aic32x4: Add gpio configuration to the codec
Dan Murphy
dmurphy at ti.com
Wed Jul 12 20:37:00 CEST 2017
Add the ability to configure the MFP1->MFP5 registers
as GPIOs. In addition adding ALSA controls to get and set
the GPIO state.
Per the data sheet each MFP can be configured as a GPIO
input only, output only or either an input or output.
Signed-off-by: Dan Murphy <dmurphy at ti.com>
---
.../devicetree/bindings/sound/tlv320aic32x4.txt | 9 +
include/sound/tlv320aic32x4.h | 23 +++
sound/soc/codecs/tlv320aic32x4.c | 206 +++++++++++++++++++++
sound/soc/codecs/tlv320aic32x4.h | 3 +
4 files changed, 241 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
index 9651fc7503a4..ca75890f0d07 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
@@ -20,6 +20,8 @@ Optional properties:
- reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
- clocks/clock-names: Clock named 'mclk' for the master clock of the codec.
See clock/clock-bindings.txt for information about the detailed format.
+ - aic32x4-gpio-func - <array of 5 int>
+ - Types are defined in include/sound/tlv320aic32x4.h
Example:
@@ -29,4 +31,11 @@ codec: tlv320aic32x4 at 18 {
reg = <0x18>;
clocks = <&clks 201>;
clock-names = "mclk";
+ aic32x4-gpio-func= <
+ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+ 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
+ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+ 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */
+ >;
};
diff --git a/include/sound/tlv320aic32x4.h b/include/sound/tlv320aic32x4.h
index 24e5d991f148..22305c0ab31a 100644
--- a/include/sound/tlv320aic32x4.h
+++ b/include/sound/tlv320aic32x4.h
@@ -22,7 +22,30 @@
#define AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K 0x00000001
#define AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K 0x00000002
+/* GPIO API */
+#define AIC32X4_MFPX_DEFAULT_VALUE 0xff
+
+#define AIC32X4_MFP1_DIN_DISABLED 0
+#define AIC32X4_MFP1_DIN_ENABLED 0x2
+#define AIC32X4_MFP1_GPIO_IN 0x4
+
+#define AIC32X4_MFP2_GPIO_OUT_LOW 0x0
+#define AIC32X4_MFP2_GPIO_OUT_HIGH 0x1
+
+#define AIC32X4_MFP_GPIO_ENABLED 0x4
+
+#define AIC32X4_MFP5_GPIO_DISABLED 0x0
+#define AIC32X4_MFP5_GPIO_INPUT 0x8
+#define AIC32X4_MFP5_GPIO_OUTPUT 0xc
+#define AIC32X4_MFP5_GPIO_OUT_LOW 0x0
+#define AIC32X4_MFP5_GPIO_OUT_HIGH 0x1
+
+struct aic32x4_setup_data {
+ unsigned int gpio_func[5];
+};
+
struct aic32x4_pdata {
+ struct aic32x4_setup_data *setup;
u32 power_cfg;
u32 micpga_routing;
bool swapdacs;
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index 28fdfc5ec544..300ee2890df3 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -74,6 +74,152 @@ struct aic32x4_priv {
struct regulator *supply_iov;
struct regulator *supply_dv;
struct regulator *supply_av;
+
+ struct aic32x4_setup_data *setup;
+ struct device *dev;
+};
+
+static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+
+ val = snd_soc_read(codec, AIC32X4_DINCTL);
+
+ ucontrol->value.integer.value[0] = (val & 0x01);
+
+ return 0;
+};
+
+static int aic32x4_set_mfp2_gpio(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+ u8 gpio_check;
+
+ val = snd_soc_read(codec, AIC32X4_DOUTCTL);
+ gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
+ if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
+ printk(KERN_ERR "%s: MFP2 is not configure as a GPIO output\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (ucontrol->value.integer.value[0] == (val & AIC32X4_MFP2_GPIO_OUT_HIGH))
+ return 0;
+
+ if (ucontrol->value.integer.value[0])
+ val |= ucontrol->value.integer.value[0];
+ else
+ val &= ~AIC32X4_MFP2_GPIO_OUT_HIGH;
+
+ snd_soc_write(codec, AIC32X4_DOUTCTL, val);
+
+ return 0;
+};
+
+static int aic32x4_get_mfp3_gpio(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+
+ val = snd_soc_read(codec, AIC32X4_SCLKCTL);
+
+ ucontrol->value.integer.value[0] = (val & 0x01);
+
+ return 0;
+};
+
+static int aic32x4_set_mfp4_gpio(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+ u8 gpio_check;
+
+ val = snd_soc_read(codec, AIC32X4_MISOCTL);
+ gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
+ if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
+ printk(KERN_ERR "%s: MFP4 is not configure as a GPIO output\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (ucontrol->value.integer.value[0] == (val & AIC32X4_MFP5_GPIO_OUT_HIGH))
+ return 0;
+
+ if (ucontrol->value.integer.value[0])
+ val |= ucontrol->value.integer.value[0];
+ else
+ val &= ~AIC32X4_MFP5_GPIO_OUT_HIGH;
+
+ snd_soc_write(codec, AIC32X4_MISOCTL, val);
+
+ return 0;
+};
+
+static int aic32x4_get_mfp5_gpio(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+
+ val = snd_soc_read(codec, AIC32X4_GPIOCTL);
+ ucontrol->value.integer.value[0] = ((val & 0x2) >> 1);
+
+ return 0;
+};
+
+static int aic32x4_set_mfp5_gpio(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u8 val;
+ u8 gpio_check;
+
+ val = snd_soc_read(codec, AIC32X4_GPIOCTL);
+ gpio_check = (val & AIC32X4_MFP5_GPIO_OUTPUT);
+ if (gpio_check != AIC32X4_MFP5_GPIO_OUTPUT) {
+ printk(KERN_ERR "%s: MFP5 is not configure as a GPIO output\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (ucontrol->value.integer.value[0] == (val & 0x1))
+ return 0;
+
+ if (ucontrol->value.integer.value[0])
+ val |= ucontrol->value.integer.value[0];
+ else
+ val &= 0xfe;
+
+ snd_soc_write(codec, AIC32X4_GPIOCTL, val);
+
+ return 0;
+};
+
+static const struct snd_kcontrol_new aic32x4_mfp1[] = {
+ SOC_SINGLE_BOOL_EXT("MFP1 GPIO", 0, aic32x4_get_mfp1_gpio, NULL),
+};
+
+static const struct snd_kcontrol_new aic32x4_mfp2[] = {
+ SOC_SINGLE_BOOL_EXT("MFP2 GPIO", 0, NULL, aic32x4_set_mfp2_gpio),
+};
+
+static const struct snd_kcontrol_new aic32x4_mfp3[] = {
+ SOC_SINGLE_BOOL_EXT("MFP3 GPIO", 0, aic32x4_get_mfp3_gpio, NULL),
+};
+
+static const struct snd_kcontrol_new aic32x4_mfp4[] = {
+ SOC_SINGLE_BOOL_EXT("MFP4 GPIO", 0, NULL, aic32x4_set_mfp4_gpio),
+};
+
+static const struct snd_kcontrol_new aic32x4_mfp5[] = {
+ SOC_SINGLE_BOOL_EXT("MFP5 GPIO", 0, aic32x4_get_mfp5_gpio,
+ aic32x4_set_mfp5_gpio),
};
/* 0dB min, 0.5dB steps */
@@ -734,6 +880,52 @@ static struct snd_soc_dai_driver aic32x4_dai = {
.symmetric_rates = 1,
};
+static void aic32x4_setup_gpios(struct snd_soc_codec *codec)
+{
+ struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
+
+ /* setup GPIO functions */
+ /* MFP1 */
+ if (aic32x4->setup->gpio_func[0] != AIC32X4_MFPX_DEFAULT_VALUE) {
+ snd_soc_write(codec, AIC32X4_DINCTL,
+ aic32x4->setup->gpio_func[0]);
+ snd_soc_add_codec_controls(codec, aic32x4_mfp1,
+ ARRAY_SIZE(aic32x4_mfp1));
+ }
+
+ /* MFP2 */
+ if (aic32x4->setup->gpio_func[1] != AIC32X4_MFPX_DEFAULT_VALUE) {
+ snd_soc_write(codec, AIC32X4_DOUTCTL,
+ aic32x4->setup->gpio_func[1]);
+ snd_soc_add_codec_controls(codec, aic32x4_mfp2,
+ ARRAY_SIZE(aic32x4_mfp2));
+ }
+
+ /* MFP3 */
+ if (aic32x4->setup->gpio_func[2] != AIC32X4_MFPX_DEFAULT_VALUE) {
+ snd_soc_write(codec, AIC32X4_SCLKCTL,
+ aic32x4->setup->gpio_func[2]);
+ snd_soc_add_codec_controls(codec, aic32x4_mfp3,
+ ARRAY_SIZE(aic32x4_mfp3));
+ }
+
+ /* MFP4 */
+ if (aic32x4->setup->gpio_func[3] != AIC32X4_MFPX_DEFAULT_VALUE) {
+ snd_soc_write(codec, AIC32X4_MISOCTL,
+ aic32x4->setup->gpio_func[3]);
+ snd_soc_add_codec_controls(codec, aic32x4_mfp4,
+ ARRAY_SIZE(aic32x4_mfp4));
+ }
+
+ /* MFP5 */
+ if (aic32x4->setup->gpio_func[4] != AIC32X4_MFPX_DEFAULT_VALUE) {
+ snd_soc_write(codec, AIC32X4_GPIOCTL,
+ aic32x4->setup->gpio_func[4]);
+ snd_soc_add_codec_controls(codec, aic32x4_mfp5,
+ ARRAY_SIZE(aic32x4_mfp5));
+ }
+}
+
static int aic32x4_codec_probe(struct snd_soc_codec *codec)
{
struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
@@ -746,6 +938,9 @@ static int aic32x4_codec_probe(struct snd_soc_codec *codec)
snd_soc_write(codec, AIC32X4_RESET, 0x01);
+ if (aic32x4->setup)
+ aic32x4_setup_gpios(codec);
+
/* Power platform configuration */
if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) {
snd_soc_write(codec, AIC32X4_MICBIAS, AIC32X4_MICBIAS_LDOIN |
@@ -810,10 +1005,20 @@ static struct snd_soc_codec_driver soc_codec_dev_aic32x4 = {
static int aic32x4_parse_dt(struct aic32x4_priv *aic32x4,
struct device_node *np)
{
+ struct aic32x4_setup_data *aic32x4_setup;
+
+ aic32x4_setup = devm_kzalloc(aic32x4->dev, sizeof(*aic32x4_setup),
+ GFP_KERNEL);
+ if (!aic32x4_setup)
+ return -ENOMEM;
+
aic32x4->swapdacs = false;
aic32x4->micpga_routing = 0;
aic32x4->rstn_gpio = of_get_named_gpio(np, "reset-gpios", 0);
+ if (of_property_read_u32_array(np, "aic32x4-gpio-func",
+ aic32x4_setup->gpio_func, 5) >= 0)
+ aic32x4->setup = aic32x4_setup;
return 0;
}
@@ -932,6 +1137,7 @@ int aic32x4_probe(struct device *dev, struct regmap *regmap)
if (aic32x4 == NULL)
return -ENOMEM;
+ aic32x4->dev = dev;
dev_set_drvdata(dev, aic32x4);
if (pdata) {
diff --git a/sound/soc/codecs/tlv320aic32x4.h b/sound/soc/codecs/tlv320aic32x4.h
index a197dd51addc..da7cec482bcb 100644
--- a/sound/soc/codecs/tlv320aic32x4.h
+++ b/sound/soc/codecs/tlv320aic32x4.h
@@ -44,8 +44,11 @@ int aic32x4_remove(struct device *dev);
#define AIC32X4_IFACE4 31
#define AIC32X4_IFACE5 32
#define AIC32X4_IFACE6 33
+#define AIC32X4_GPIOCTL 52
#define AIC32X4_DOUTCTL 53
#define AIC32X4_DINCTL 54
+#define AIC32X4_MISOCTL 55
+#define AIC32X4_SCLKCTL 56
#define AIC32X4_DACSPB 60
#define AIC32X4_ADCSPB 61
#define AIC32X4_DACSETUP 63
--
2.13.2.516.ge629a7d28
More information about the Alsa-devel
mailing list