[alsa-devel] [PATCH 4/7] IIO: add STM32 DFSDM ADC support
Jonathan Cameron
jic23 at kernel.org
Sun Jan 29 13:15:42 CET 2017
On 23/01/17 16:32, Arnaud Pouliquen wrote:
> Add driver to handle Sigma Delta ADC conversion for ADC
> connected to DFSDM IP.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen at st.com>
Various comments inline. Again mostly reading this to grasp how the whole
lot fits together.
At the moment, other than some new ABI, this is a fairly simple sysfs or in
kernel polled ADC driver. The hardware seems to support a whole lot more
but fair enough to present this as a starting point!
Jonathan
> ---
> drivers/iio/adc/Kconfig | 9 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/stm32-dfsdm-adc.c | 676 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 686 insertions(+)
> create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index e0b3c09..4b2b886 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -441,6 +441,15 @@ config STM32_ADC
> This driver can also be built as a module. If so, the module
> will be called stm32-adc.
>
> +config STM32_DFSDM_ADC
> + tristate "STMicroelectronics STM32 DFSDM ADC driver"
> + depends on (ARCH_STM32 && OF && MFD_STM32_DFSDM) || COMPILE_TEST
> + help
> + Say yes here to build the driver for the STMicroelectronics
> + STM32 analog-to-digital converter with Digital filter.
> + This driver can also be built as a module. If so, the module
> + will be called stm32_dfsdm_adc.
> +
> config STX104
> tristate "Apex Embedded Systems STX104 driver"
> depends on X86 && ISA_BUS_API
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 8e02a94..aed42c6 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -43,6 +43,7 @@ obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> obj-$(CONFIG_STX104) += stx104.o
> obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
> obj-$(CONFIG_STM32_ADC) += stm32-adc.o
> +obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o
> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
> obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
> obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o
> diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
> new file mode 100644
> index 0000000..727d6b1
> --- /dev/null
> +++ b/drivers/iio/adc/stm32-dfsdm-adc.c
> @@ -0,0 +1,676 @@
> +/*
> + * This file is part of STM32 DFSDM ADC driver
> + *
> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
> + * Author: Arnaud Pouliquen <arnaud.pouliquen at st.com>.
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/irq_work.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include <linux/iio/iio.h>
> +
> +#include <linux/mfd/stm32-dfsdm.h>
> +
> +#define DFSDM_ADC_MAX_RESOLUTION 24
> +#define DFSDM_ADC_STORAGE_BITS 32
> +
> +#define DFSDM_MAX_CH_OFFSET BIT(24)
> +#define DFSDM_MAX_CH_SHIFT 24
> +
> +#define DFSDM_TIMEOUT_US 100000
> +#define DFSDM_TIMEOUT (msecs_to_jiffies(DFSDM_TIMEOUT_US / 1000))
> +
> +#define CH_ID_FROM_IDX(i) (adc->inputs[i].id)
> +#define CH_CFG_FROM_IDX(i) (&adc->inputs_cfg[i])
> +
> +struct stm32_dfsdm_adc {
> + struct device *dev;
> + struct stm32_dfsdm *dfsdm;
> + struct list_head adc_list;
> +
> + /* Filter */
> + unsigned int fl_id;
> + struct stm32_dfsdm_sinc_filter sinc;
> + unsigned int int_oversampling;
> +
> + /* Channels */
> + struct stm32_dfsdm_channel *inputs;
> + struct stm32_dfsdm_ch_cfg *inputs_cfg;
> +
> + /* Raw mode*/
> + struct completion completion;
> + struct stm32_dfsdm_regular reg_params;
> + u32 *buffer;
> +};
> +
> +static const char * const stm32_dfsdm_adc_sinc_order[] = {
> + [0] = "FastSinc",
> + [1] = "Sinc1",
> + [2] = "Sinc2",
> + [3] = "Sinc3",
> + [4] = "Sinc4",
> + [5] = "Sinc5",
> +};
> +
> +static inline const struct iio_chan_spec *get_ch_from_id(
> + struct iio_dev *indio_dev, int ch_id)
> +{
> + int i;
> +
> + for (i = 0; i < indio_dev->num_channels; i++) {
> + if (ch_id == indio_dev->channels[i].channel)
> + return &indio_dev->channels[i];
> + }
> +
> + return NULL;
> +}
> +
> +/*
> + * Filter attributes
> + */
> +
> +static int stm32_dfsdm_adc_set_sinc(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + unsigned int val)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> +
> + dev_dbg(&indio_dev->dev, "%s: %s\n", __func__,
> + stm32_dfsdm_adc_sinc_order[adc->sinc.order]);
> +
> + adc->sinc.order = val;
> +
> + return 0;
> +}
> +
> +static int stm32_dfsdm_adc_get_sinc(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> +
> + dev_dbg(&indio_dev->dev, "%s: %s\n", __func__,
> + stm32_dfsdm_adc_sinc_order[adc->sinc.order]);
> +
> + return adc->sinc.order;
> +}
> +
> +static const struct iio_enum stm32_dfsdm_adc_fl_sinc_order = {
> + .items = stm32_dfsdm_adc_sinc_order,
> + .num_items = ARRAY_SIZE(stm32_dfsdm_adc_sinc_order),
> + .get = stm32_dfsdm_adc_get_sinc,
> + .set = stm32_dfsdm_adc_set_sinc,
> +};
> +
> +static ssize_t stm32_dfsdm_adc_get_int_os(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", adc->int_oversampling);
> +}
> +
> +static ssize_t stm32_dfsdm_adc_set_int_os(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + const char *buf, size_t len)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + int ret, val;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret)
> + return ret;
> +
> + if ((!val) || (val > DFSDM_MAX_INT_OVERSAMPLING)) {
> + dev_err(&indio_dev->dev, "invalid oversampling (0 or > %#x)",
> + DFSDM_MAX_INT_OVERSAMPLING);
> + return -EINVAL;
> + }
> + adc->int_oversampling = val;
> +
> + return len;
> +}
> +
> +static ssize_t stm32_dfsdm_adc_get_fl_os(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", adc->sinc.oversampling);
> +}
> +
> +static ssize_t stm32_dfsdm_adc_set_fl_os(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + const char *buf, size_t len)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + int ret, val;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret)
> + return ret;
> +
> + if ((!val) || (val > DFSDM_MAX_FL_OVERSAMPLING)) {
> + dev_err(&indio_dev->dev, "invalid oversampling (0 or > %#x)",
> + DFSDM_MAX_FL_OVERSAMPLING);
> + return -EINVAL;
> + }
> + adc->sinc.oversampling = val;
> +
> + return len;
> +}
> +
> +/*
> + * Data bit shifting attribute
> + */
> +static ssize_t stm32_dfsdm_adc_get_shift(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + struct stm32_dfsdm_ch_cfg *ch_cfg = CH_CFG_FROM_IDX(chan->scan_index);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", ch_cfg->right_bit_shift);
> +}
> +
> +static ssize_t stm32_dfsdm_adc_set_shift(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + const char *buf, size_t len)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + struct stm32_dfsdm_ch_cfg *ch_cfg = CH_CFG_FROM_IDX(chan->scan_index);
> + int ret, val;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret)
> + return ret;
> +
> + if (val > DFSDM_MAX_CH_SHIFT) {
> + dev_err(&indio_dev->dev, "invalid shift value (> %#x)",
> + DFSDM_MAX_CH_SHIFT);
> + return -EINVAL;
> + }
> + ch_cfg->right_bit_shift = val;
> +
> + return len;
> +}
> +
> +static const struct iio_chan_spec_ext_info stm32_dfsdm_adc_ext_info[] = {
> + /* sinc_filter_order: Configure Sinc filter order */
> + IIO_ENUM("sinc_filter_order", IIO_SHARED_BY_TYPE,
> + &stm32_dfsdm_adc_fl_sinc_order),
Documentation? This is new ABI. Plus I'd like to see a generic description
of the filters rather than a name out of the datasheet.
Docs under Documentation/ABI/testing/sysfs-bus-iio-*
> + IIO_ENUM_AVAILABLE("sinc_filter_order", &stm32_dfsdm_adc_fl_sinc_order),
> + /* filter oversampling: Post filter oversampling ratio */
> + {
> + .name = "sinc_filter_oversampling_ratio",
> + .shared = IIO_SHARED_BY_TYPE,
> + .read = stm32_dfsdm_adc_get_fl_os,
> + .write = stm32_dfsdm_adc_set_fl_os,
> + },
> + /* data_right_bit_shift : Filter output data shifting */
> + {
> + .name = "data_right_bit_shift",
Well this is a simple scaling I think? Should be supported as such.
> + .shared = IIO_SEPARATE,
> + .read = stm32_dfsdm_adc_get_shift,
> + .write = stm32_dfsdm_adc_set_shift,
> + },
> +
> + /*
> + * averaging_length : Mean windows of data from filter.
> + * Defines how many filter data will be summed to one data output
> + */
This probably corresponds to the conventional oversampling_ratio that
we already have as standard ABI (be it with some magic having occured before
hand).
> + {
> + .name = "integrator_oversampling",
> + .shared = IIO_SHARED_BY_TYPE,
> + .read = stm32_dfsdm_adc_get_int_os,
> + .write = stm32_dfsdm_adc_set_int_os,
> + },
> + {},
> +};
> +
> +/*
> + * Filter event routine called under IRQ context
Again, keep to kernel comment style please. Either do proper kernel-doc
or just simple single line comments where appropriate.
> + */
> +static void stm32_dfsdm_event_cb(struct stm32_dfsdm *dfsdm, int flt_id,
> + enum stm32_dfsdm_events ev, unsigned int param,
> + void *context)
> +{
> + struct stm32_dfsdm_adc *adc = context;
> + unsigned int ch_id;
> +
> + dev_dbg(adc->dev, "%s:\n", __func__);
> +
> + switch (ev) {
> + case DFSDM_EVENT_REG_EOC:
> + stm32_dfsdm_read_fl_conv(adc->dfsdm, flt_id, adc->buffer,
> + &ch_id, DFSDM_FILTER_REG_CONV);
> + complete(&adc->completion);
> + break;
> + case DFSDM_EVENT_REG_XRUN:
> + dev_err(adc->dev, "%s: underrun detected for filter %d\n",
> + __func__, flt_id);
> + break;
> + default:
> + dev_err(adc->dev, "%s: event %#x not implemented\n",
> + __func__, ev);
> + break;
> + }
> +}
> +
> +static inline void stm32_dfsdm_adc_fl_config(struct stm32_dfsdm_adc *adc,
> + u32 channel_mask,
> + struct stm32_dfsdm_filter *filter)
> +{
> + dev_dbg(adc->dev, "%s:\n", __func__);
> +
> + filter->event.cb = stm32_dfsdm_event_cb;
> + filter->event.context = adc;
> +
> + filter->sinc_params = adc->sinc;
> +
> + filter->int_oversampling = adc->int_oversampling;
> +}
> +
> +static int stm32_dfsdm_adc_start_raw_conv(struct stm32_dfsdm_adc *adc,
> + const struct iio_chan_spec *chan)
> +{
> + struct stm32_dfsdm_filter filter;
> + struct stm32_dfsdm_ch_cfg *ch_cfg = CH_CFG_FROM_IDX(chan->scan_index);
> + unsigned int ch_id = CH_ID_FROM_IDX(chan->scan_index);
> + int ret;
> +
> + dev_dbg(adc->dev, "%s:\n", __func__);
> +
> + memset(&filter, 0, sizeof(filter));
> + filter.reg_params = &adc->reg_params;
> +
> + if (!filter.reg_params)
> + return -ENOMEM;
> +
> + filter.reg_params->ch_src = ch_id;
> +
> + stm32_dfsdm_adc_fl_config(adc, BIT(ch_id), &filter);
A lot of this seems to run every time. Can we not leave some of this
stuff configured for all conversions on a given channel?
> +
> + ret = stm32_dfsdm_configure_filter(adc->dfsdm, adc->fl_id, &filter);
> + if (ret < 0) {
> + dev_err(adc->dev, "Failed to configure filter\n");
> + return ret;
> + }
> +
> + ret = stm32_dfsdm_start_channel(adc->dfsdm, ch_id, ch_cfg);
> + if (ret < 0)
> + return ret;
> +
> + stm32_dfsdm_start_filter(adc->dfsdm, adc->fl_id, DFSDM_FILTER_REG_CONV);
> +
> + return 0;
> +}
> +
> +static void stm32_dfsdm_adc_stop_raw_conv(struct stm32_dfsdm_adc *adc,
> + const struct iio_chan_spec *chan)
> +{
> + unsigned int ch_id = CH_ID_FROM_IDX(chan->scan_index);
> +
> + dev_dbg(adc->dev, "%s:\n", __func__);
> +
> + stm32_dfsdm_stop_filter(adc->dfsdm, adc->fl_id);
> + stm32_dfsdm_stop_channel(adc->dfsdm, ch_id);
> +}
> +
> +static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + u32 *result)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + long timeout;
> + int ret;
> +
> + dev_dbg(&indio_dev->dev, "%s:\n", __func__);
> +
> + reinit_completion(&adc->completion);
> +
> + ret = stm32_dfsdm_register_fl_event(adc->dfsdm, adc->fl_id,
> + DFSDM_EVENT_REG_EOC, 0);
> + if (ret < 0) {
> + dev_err(&indio_dev->dev, "Failed to register event\n");
> + return ret;
> + }
> +
> + adc->buffer = result;
> + ret = stm32_dfsdm_adc_start_raw_conv(adc, chan);
> + if (ret) {
> + dev_err(&indio_dev->dev, "Failed to start conversion\n");
> + goto free_event;
> + }
> +
> + timeout = wait_for_completion_interruptible_timeout(&adc->completion,
> + DFSDM_TIMEOUT);
> + if (timeout == 0) {
> + dev_warn(&indio_dev->dev, "Conversion timed out!\n");
> + ret = -ETIMEDOUT;
> + } else if (timeout < 0) {
> + ret = timeout;
> + } else {
> + dev_dbg(&indio_dev->dev, "converted val %#x\n", *result);
> + ret = IIO_VAL_INT;
> + }
> +
> + stm32_dfsdm_adc_stop_raw_conv(adc, chan);
> +
> +free_event:
> + adc->buffer = NULL;
> + stm32_dfsdm_unregister_fl_event(adc->dfsdm, adc->fl_id,
> + DFSDM_EVENT_REG_EOC, 0);
> +
> + return ret;
> +}
> +
> +static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + struct stm32_dfsdm_ch_cfg *ch_cfg = CH_CFG_FROM_IDX(chan->scan_index);
> + int ret = -EINVAL;
> +
> + dev_dbg(&indio_dev->dev, "%s channel %d\n", __func__, chan->channel);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = stm32_dfsdm_single_conv(indio_dev, chan, val);
> + if (!ret)
> + ret = IIO_VAL_INT;
> + break;
> + case IIO_CHAN_INFO_OFFSET:
> + *val = ch_cfg->offset;
> + ret = IIO_VAL_INT;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long mask)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + struct stm32_dfsdm_ch_cfg *ch_cfg = CH_CFG_FROM_IDX(chan->scan_index);
> +
> + dev_dbg(&indio_dev->dev, "%s channel%d", __func__, chan->channel);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_OFFSET:
> + if (val > DFSDM_MAX_CH_OFFSET) {
> + dev_err(&indio_dev->dev, "invalid offset (> %#lx)",
> + DFSDM_MAX_CH_OFFSET);
> + return -EINVAL;
> + }
> + ch_cfg->offset = val;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct iio_info stm32_dfsdm_iio_info = {
> + .read_raw = stm32_dfsdm_read_raw,
> + .write_raw = stm32_dfsdm_write_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
> + struct iio_chan_spec *chan,
> + int chan_idx)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + struct stm32_dfsdm_channel *dfsdm_ch = &adc->inputs[chan_idx];
> + struct iio_chan_spec *ch = &chan[chan_idx];
> + int ret;
> + unsigned int alt_ch = 0;
> +
> + ret = of_property_read_u32_index(indio_dev->dev.of_node,
> + "st,adc-channels", chan_idx,
> + &ch->channel);
> + if (ret < 0) {
> + dev_err(&indio_dev->dev,
> + " error parsing 'st,adc-channels' for idx %d\n",
> + chan_idx);
> + return ret;
> + }
> +
> + ret = of_property_read_string_index(indio_dev->dev.of_node,
> + "st,adc-channel-names", chan_idx,
> + &ch->datasheet_name);
> + if (ret < 0) {
> + dev_err(&indio_dev->dev,
> + " error parsing 'st,adc-channel-names' for idx %d\n",
> + chan_idx);
> + return ret;
> + }
> +
> + ch->extend_name = ch->datasheet_name;
This is not what extend_name is for, don't do it - it just makes it
really difficult to have standard userspace code. With hindsight I should
probably never have introduced it in the first place.
> + ch->type = IIO_VOLTAGE;
> + ch->indexed = 1;
> + ch->scan_index = chan_idx;
> + ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_OFFSET);
> + ch->scan_type.sign = 'u';
> + ch->scan_type.realbits = DFSDM_ADC_MAX_RESOLUTION;
> + ch->scan_type.storagebits = DFSDM_ADC_STORAGE_BITS;
Unless these are used elsehwere, given they are 'real numbers' it would
actually be easier to read the code if you just put the numbers in here
directly.
> + ch->scan_type.shift = 8;
> +
> + ch->ext_info = stm32_dfsdm_adc_ext_info;
> +
> + of_property_read_u32_index(indio_dev->dev.of_node, "st,adc-alt-channel",
> + chan_idx, &alt_ch);
> + /* Select the previous channel if alternate field is defined*/
space before */ Please check throughout as patches to fix this sort of
thing are really boring :)
> + if (alt_ch) {
> + if (!ch->channel)
> + ch->channel = adc->dfsdm->max_channels;
> + ch->channel -= 1;
> + dfsdm_ch->serial_if.pins = DFSDM_CHANNEL_NEXT_CHANNEL_PINS;
> + } else {
> + dfsdm_ch->serial_if.pins = DFSDM_CHANNEL_SAME_CHANNEL_PINS;
> + }
> + dfsdm_ch->id = ch->channel;
> +
> + dfsdm_ch->type.DataPacking = DFSDM_CHANNEL_STANDARD_MODE;
> +
> + dfsdm_ch->type.source = DFSDM_CHANNEL_EXTERNAL_INPUTS;
> + ret = of_property_read_u32_index(indio_dev->dev.of_node,
> + "st,adc-channel-types",
> + chan_idx, &dfsdm_ch->serial_if.type);
> + if (ret < 0)
> + dfsdm_ch->serial_if.type = DFSDM_CHANNEL_SPI_RISING;
> +
> + ret = of_property_read_u32_index(indio_dev->dev.of_node,
> + "st,adc-channel-clk-src",
> + chan_idx,
> + &dfsdm_ch->serial_if.spi_clk);
> +
> + if ((dfsdm_ch->serial_if.type == DFSDM_CHANNEL_MANCHESTER_RISING) ||
> + (dfsdm_ch->serial_if.type == DFSDM_CHANNEL_MANCHESTER_FALLING) ||
> + (ret < 0))
> + dfsdm_ch->serial_if.spi_clk = DFSDM_CHANNEL_SPI_CLOCK_INTERNAL;
> +
> + return stm32_dfsdm_get_channel(adc->dfsdm, dfsdm_ch);
> +}
> +
> +static int stm32_dfsdm_adc_chan_init(struct iio_dev *indio_dev)
> +{
> + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> + unsigned int num_ch;
> + struct iio_chan_spec *channels;
> + int ret, chan_idx;
> +
> + num_ch = of_property_count_strings(indio_dev->dev.of_node,
> + "st,adc-channel-names");
> +
> + channels = devm_kcalloc(&indio_dev->dev, num_ch, sizeof(*channels),
> + GFP_KERNEL);
> + if (!channels)
> + return -ENOMEM;
> +
> + adc->inputs = devm_kcalloc(&indio_dev->dev, num_ch,
> + sizeof(*adc->inputs), GFP_KERNEL);
> + if (!adc->inputs)
> + return -ENOMEM;
> +
> + adc->inputs_cfg = devm_kcalloc(&indio_dev->dev, num_ch,
> + sizeof(*adc->inputs_cfg), GFP_KERNEL);
> + if (!adc->inputs_cfg)
> + return -ENOMEM;
There are a lot of small allocs here. I'm not sure how many channels there
can be, but it may be more efficient (and cleaner) to just put arrays
of sufficient size to take all possible channels directly in your adc
structure.
> +
> + for (chan_idx = 0; chan_idx < num_ch; chan_idx++) {
> + ret = stm32_dfsdm_adc_chan_init_one(indio_dev, channels,
> + chan_idx);
> + if (ret < 0)
> + goto ch_error;
> + }
> +
> + indio_dev->num_channels = num_ch;
> + indio_dev->channels = channels;
> +
> + return 0;
> +
> +ch_error:
> + for (chan_idx--; chan_idx >= 0; chan_idx--)
> + stm32_dfsdm_release_channel(adc->dfsdm,
> + adc->inputs[chan_idx].id);
> +
> + return ret;
> +}
> +
> +static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct stm32_dfsdm_adc *adc;
> + struct device_node *np = pdev->dev.of_node;
> + struct iio_dev *indio_dev;
> + int ret, i;
> +
> + if (!np)
> + return -ENODEV;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
> + if (IS_ERR(indio_dev)) {
> + dev_err(dev, "%s: failed to allocate iio", __func__);
> + return PTR_ERR(indio_dev);
> + }
> +
> + indio_dev->name = np->name;
> + indio_dev->dev.parent = dev;
> + indio_dev->dev.of_node = np;
> + indio_dev->info = &stm32_dfsdm_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + adc = iio_priv(indio_dev);
> + if (IS_ERR(adc)) {
> + dev_err(dev, "%s: failed to allocate adc", __func__);
> + return PTR_ERR(adc);
> + }
> +
> + if (of_property_read_u32(np, "reg", &adc->fl_id)) {
> + dev_err(&pdev->dev, "missing reg property\n");
> + return -EINVAL;
> + }
> +
> + adc->dev = &indio_dev->dev;
> + adc->dfsdm = dev_get_drvdata(pdev->dev.parent);
> +
> + ret = stm32_dfsdm_adc_chan_init(indio_dev);
> + if (ret < 0) {
> + dev_err(dev, "iio channels init failed\n");
> + return ret;
> + }
> +
> + ret = stm32_dfsdm_get_filter(adc->dfsdm, adc->fl_id);
> + if (ret < 0)
> + goto get_fl_err;
> +
> + adc->int_oversampling = DFSDM_MIN_INT_OVERSAMPLING;
> + adc->sinc.oversampling = DFSDM_MIN_FL_OVERSAMPLING;
> +
> + init_completion(&adc->completion);
> +
> + ret = devm_iio_device_register(dev, indio_dev);
Probe order must be reversed in remove to make it obvious there are no
weird and wonderful race conditions. The moment you have anything in probe
that needs unwinding before a devm call that rule is broken.
Upshot, you can't use the devm version of iio_device_register.
> + if (ret) {
> + dev_err(adc->dev, "failed to register iio device\n");
> + goto register_err;
> + }
> +
> + platform_set_drvdata(pdev, adc);
> +
> + return 0;
> +
> +register_err:
> + stm32_dfsdm_release_filter(adc->dfsdm, adc->fl_id);
> +
> +get_fl_err:
> + for (i = 0; i < indio_dev->num_channels; i++)
> + stm32_dfsdm_release_channel(adc->dfsdm, adc->inputs[i].id);
> +
> + return ret;
> +}
> +
> +static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev;
> + struct stm32_dfsdm_adc *adc = platform_get_drvdata(pdev);
> + int i;
> +
> + indio_dev = iio_priv_to_dev(adc);
> + for (i = 0; i < indio_dev->num_channels; i++)
> + stm32_dfsdm_release_channel(adc->dfsdm, adc->inputs[i].id);
> + stm32_dfsdm_release_filter(adc->dfsdm, adc->fl_id);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32_dfsdm_adc_match[] = {
> + { .compatible = "st,stm32-dfsdm-adc"},
> + {}
> +};
> +
> +static struct platform_driver stm32_dfsdm_adc_driver = {
> + .driver = {
> + .name = "stm32-dfsdm-adc",
> + .of_match_table = stm32_dfsdm_adc_match,
> + },
> + .probe = stm32_dfsdm_adc_probe,
> + .remove = stm32_dfsdm_adc_remove,
> +};
> +module_platform_driver(stm32_dfsdm_adc_driver);
> +
> +MODULE_DESCRIPTION("STM32 sigma delta ADC");
> +MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen at st.com>");
> +MODULE_LICENSE("GPL v2");
>
More information about the Alsa-devel
mailing list