[alsa-devel] dmesg complains with CONFIG_SND_VERBOSE_PROCFS

[Takashi Iwai]

On Mon, 27 Feb 2017 14:49:00 +0100,
Linus Walleij wrote:
> 
> If CONFIG_SND_VERBOSE_PROCFS is enabled I got a bunch of
> nasty messages from duplicate entries when registering the DAIs
> like this:
> 
> [    3.144805] entry->name == "info"
> [    3.148132] entry->name == "info"
> [    3.151519] entry->name == "hw_params"
> [    3.155273] entry->name == "sw_params"
> [    3.159027] entry->name == "status"
> [    3.164001] entry->name == "prealloc"
> [    3.167663] entry->name == "prealloc_max"
> [    3.173034] entry->name == "prealloc"
> [    3.176696] ------------[ cut here ]------------
> [    3.181335] WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
> proc_register+0xf0/0x110
> [    3.189422] proc_dir_entry 'sub0/prealloc' already registered
> (...)
> [    3.414642] entry->name == "prealloc_max"
> [    3.418670] ------------[ cut here ]------------
> [    3.423309] WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
> proc_register+0xf0/0x110
> [    3.431396] proc_dir_entry 'sub0/prealloc_max' already registered
> (...)
> [    3.658020] snd-soc-mop500 soc:sound: ab8500-codec-dai.0 <->
> 80124000.msp mapping ok
> [    3.665893] entry->name == "info"
> [    3.669219] entry->name == "info"
> [    3.672546] entry->name == "hw_params"
> [    3.676300] entry->name == "sw_params"
> [    3.680053] entry->name == "status"
> [    3.684906] entry->name == "prealloc"
> [    3.688568] entry->name == "prealloc_max"
> [    3.693939] entry->name == "prealloc"
> [    3.697601] ------------[ cut here ]------------
> [    3.702239] WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
> proc_register+0xf0/0x110
> [    3.710296] proc_dir_entry 'sub0/prealloc' already registered
> (...)
> [    3.936645] entry->name == "prealloc_max"
> [    3.940673] ------------[ cut here ]------------
> [    3.945281] WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
> proc_register+0xf0/0x110
> [    3.953369] proc_dir_entry 'sub0/prealloc_max' already registered
> [    4.180023] snd-soc-mop500 soc:sound: ab8500-codec-dai.1 <->
> 80125000.msp mapping ok
> 
> What I can't seem to figure out is whether the DAI in my card
> (sound/soc/ux500/mop500.c) is misconfigured some way, or
> if CONFIG_SND_VERBOSE_PROCFS is not handling this
> the right way?
> 
> If I take out the config option everything seems to work smoothly
> but I guess it should be possible to have this on?

The warnings are about PCM substream procfs, and the conflicting ones
are created by snd_pcm_lib_preallocate_pages*() calls.

Is it a deferred probe?  I can imagine that some driver forgot to
clean up and left the preallocated stuff.  For example,
soc-generic-dmaengine-pcm.c calls snd_pcm_lib_preallocate_pages*() but
has no counterpart for freeing it.


Takashi