[alsa-devel] [linux-sunxi] [PATCH v3 11/11] ASoC: sun4i-i2s: Add support for H3
Code Kipper
codekipper at gmail.com
Tue Aug 15 09:23:53 CEST 2017
On 12 August 2017 at 14:27, Chen-Yu Tsai <wens at csie.org> wrote:
> On Sat, Aug 12, 2017 at 7:00 PM, <codekipper at gmail.com> wrote:
>> From: Marcus Cooper <codekipper at gmail.com>
>>
>> The sun8i-h3 introduces a lot of changes to the i2s block such
>> as different register locations, extended clock division and
>> more operational modes. As we have to consider the earlier
>> implementation then these changes need to be isolated.
>>
>> None of the new functionality has been implemented yet, the
>> driver has just been expanded to allow it work on the H3 SoC.
>>
>> Signed-off-by: Marcus Cooper <codekipper at gmail.com>
>> ---
>> .../devicetree/bindings/sound/sun4i-i2s.txt | 2 +
>> sound/soc/sunxi/sun4i-i2s.c | 176 ++++++++++++++++++++-
>> 2 files changed, 176 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
>> index ee21da865771..fc5da6080759 100644
>> --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
>> +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
>> @@ -8,6 +8,7 @@ Required properties:
>> - compatible: should be one of the following:
>> - "allwinner,sun4i-a10-i2s"
>> - "allwinner,sun6i-a31-i2s"
>> + - "allwinner,sun8i-h3-i2s"
>> - reg: physical base address of the controller and length of memory mapped
>> region.
>> - interrupts: should contain the I2S interrupt.
>> @@ -22,6 +23,7 @@ Required properties:
>>
>> Required properties for the following compatibles:
>> - "allwinner,sun6i-a31-i2s"
>> + - "allwinner,sun8i-h3-i2s"
>> - resets: phandle to the reset line for this codec
>>
>> Example:
>> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
>> index a6b464c8cc6c..b6faa95d972a 100644
>> --- a/sound/soc/sunxi/sun4i-i2s.c
>> +++ b/sound/soc/sunxi/sun4i-i2s.c
>> @@ -92,11 +92,41 @@
>> #define SUN4I_I2S_RX_CHAN_SEL_REG 0x38
>> #define SUN4I_I2S_RX_CHAN_MAP_REG 0x3c
>>
>> +/* Defines required for sun8i-h3 support */
>> +#define SUN8I_I2S_CTRL_BCLK_OUT BIT(18)
>> +#define SUN8I_I2S_CTRL_LRCK_OUT BIT(17)
>> +
>> +#define SUN8I_I2S_FMT0_LRCK_PERIOD_MASK GENMASK(17, 8)
>> +#define SUN8I_I2S_FMT0_LRCK_PERIOD(period) ((period << 8) - 1)
>
> I'm pretty sure this should be ((period - 1) << 8).
>
> Once fixed,
>
> Reviewed-by: Chen-Yu Tsai <wens at csie.org>
>
> P.S. the version tag for this series in the subject is wrong.
Hi Wens,
thanks for the reviews..I've ack'd them all and will push again once tested.
BR,
CK
More information about the Alsa-devel
mailing list