[alsa-devel] [linux-sunxi] [PATCH v3 02/12] ASoC: sun4i-i2s: Add clkdiv offsets to quirks

[Chen-Yu Tsai]

On Sat, Jul 29, 2017 at 10:17 PM,  <codekipper at gmail.com> wrote:
> From: Marcus Cooper <codekipper at gmail.com>
>
> The BCLKDIV and MCLKDIV found on newer SoCs start from an offset of 1.
> Add the functionality to adjust the division values according to the
> needs to the device being used.
>
> Signed-off-by: Marcus Cooper <codekipper at gmail.com>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index d7ee7a443e4e..1d538de4e4d0 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -94,9 +94,13 @@
>   * struct sun4i_i2s_quirks - Differences between SoC variants.
>   *
>   * @has_reset: SoC needs reset deasserted.
> + * @mclk_offset: Value by which mclkdiv needs to be adjusted.
> + * @bclk_offset: Value by which bclkdiv needs to be adjusted.
>   */
>  struct sun4i_i2s_quirks {
>         bool                            has_reset;
> +       unsigned int                    mclk_offset;
> +       unsigned int                    bclk_offset;
>  };
>
>  struct sun4i_i2s {
> @@ -149,7 +153,7 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
>                 const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
>
>                 if (bdiv->div == div)
> -                       return bdiv->val;
> +                       return bdiv->val + i2s->variant->bclk_offset;

The offset should best be applied when the value is written to the register,
in sun4i_i2s_set_clk_rate(). sun4i_i2s_get_*_div() should do what the name
says, that is calculate a divider based on the parameters it is given.

Regards
ChenYu

>         }
>
>         return -EINVAL;
> @@ -167,7 +171,7 @@ static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
>                 const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
>
>                 if (mdiv->div == div)
> -                       return mdiv->val;
> +                       return mdiv->val + i2s->variant->mclk_offset;
>         }
>
>         return -EINVAL;
> --
> 2.13.3
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.