[alsa-devel] [PATCH 1/2] ASoC: rsnd: move "renesas, rsrc-card" to "simple-scu-audio-card" on Document

Kuninori Morimoto kuninori.morimoto.gx at renesas.com
Wed Apr 26 04:26:30 CEST 2017


From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

"renesas,rsrc-card" is exchanged to "simple-scu-card".
Let's update Document

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 .../devicetree/bindings/sound/renesas,rsnd.txt     | 30 +++++++++++-----------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 15a7316..3332910 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
 **     Asynchronous mode
 ------------------
 
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
 example)
 
 	sound {
-		compatible = "renesas,rsrc-card";
+		compatible = "simple-scu-audio-card";
 		...
 		/*
 		 * SRC Asynchronous mode setting
@@ -97,12 +97,12 @@ example)
 		 * Inputed 48kHz data will be converted to
 		 * system specified Hz
 		 */
-		convert-rate = <48000>;
+		simple-audio-card,convert-rate = <48000>;
 		...
-		cpu {
+		simple-audio-card,cpu {
 			sound-dai = <&rcar_sound>;
 		};
-		codec {
+		simple-audio-card,codec {
 			...
 		};
 	};
@@ -141,23 +141,23 @@ For more detail information, see below
 	${LINUX}/sound/soc/sh/rcar/ctu.c
 	 - comment of header
 
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
 example)
 
 	sound {
-		compatible = "renesas,rsrc-card";
+		compatible = "simple-scu-audio-card";
 		...
 		/*
 		 * CTU setting
 		 * All input data will be converted to 2ch
 		 * as output data
 		 */
-		convert-channels = <2>;
+		simple-audio-card,convert-channels = <2>;
 		...
-		cpu {
+		simple-audio-card,cpu {
 			sound-dai = <&rcar_sound>;
 		};
-		codec {
+		simple-audio-card,codec {
 			...
 		};
 	};
@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
 	aplay -D plughw:0,0 xxxx.wav &
 	aplay -D plughw:0,1 yyyy.wav
 
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
 Ex)
 	[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
 	                            |
 	[MEM] -> [SRC2] -> [CTU03] -+
 
 	sound {
-		compatible = "renesas,rsrc-card";
+		compatible = "simple-scu-audio-card";
 		...
-		cpu at 0 {
+		simple-audio-card,cpu at 0 {
 			sound-dai = <&rcar_sound 0>;
 		};
-		cpu at 1 {
+		simple-audio-card,cpu at 1 {
 			sound-dai = <&rcar_sound 1>;
 		};
-		codec {
+		simple-audio-card,codec {
 			...
 		};
 	};
-- 
1.9.1



More information about the Alsa-devel mailing list