[alsa-devel] HDA Intel ALC889A optical optical spdif in
René Rebe
rene at exactcode.de
Fri Apr 21 19:22:16 CEST 2017
On Apr 21, 2017, at 18:37, René Rebe <rene at exactcode.de> wrote:
> Hello again,
>
> so I checked the MacBook schematics and it looks like the optical input should be directly connected to pin 47 (GPIO3/SPDIFIN)
>
> Maybe EAPD get’s accidentally / wrongly enabled? - Maybe someone can point me how to double check this in ALSA?
I the meantime I finally figured out how this debug verb setting should work via:
# hda-verb /dev/snd/hwC0D0 0x14 0x70C 0
nid = 0x14, verb = 0x70c, param = 0x0
value = 0x0
# hda-verb /dev/snd/hwC0D0 0x15 0x70C 0
nid = 0x15, verb = 0x70c, param = 0x0
value = 0x0
which made no difference either, and the ALC889 spec reads “when pin
widget SPDIF-IN is not connected via the programming configuration
register.”
Could that be a missing bit?
Any pointer or verbs I should poke welcome :-/
René
> For the record - I try to record:
> # arecord -D iec958 -f dat -c 2 > rec.wav
> Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
>
> but only get zeros:
>
> # hexdump rec.wav
> 0000000 4952 4646 0024 8000 4157 4556 6d66 2074
> 0000010 0010 0000 0001 0002 bb80 0000 ee00 0002
> 0000020 0004 0010 6164 6174 0000 8000 0000 0000
> 0000030 0000 0000 0000 0000 0000 0000 0000 0000
> *
> 0304020 0000 0000 0000 0000 0000 0000
> 030402c
>
> As far as I can see the right sub-device is running:
>
> # cat /proc/asound/card0/pcm1c/info
> card: 0
> device: 1
> subdevice: 0
> stream: CAPTURE
> id: ALC889A Digital
> name: ALC889A Digital
> subname: subdevice #0
> class: 0
> subclass: 0
> subdevices_count: 1
> subdevices_avail: 0
> bash-4.2# cat /proc/asound/card0/pcm1c/sub0/status
> state: RUNNING
> owner_pid : 25617
> trigger_time: 2735.340360836
> tstamp : 0.000000000
> delay : 3415
> avail : 3415
> avail_max : 4095
> -----
> hw_ptr : 2047320
> appl_ptr : 2043905
>
>
> # cat /proc/asound/card0/codec#0
> Codec: Realtek ALC889A
> Address: 0
> AFG Function Id: 0x1 (unsol 1)
> Vendor Id: 0x10ec0885
> Subsystem Id: 0x106b2c00
> Revision Id: 0x100103
> No Modem Function Group found
> Default PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> State of AFG node 0x01:
> Power states: D0 D1 D2 D3
> Power: setting=D0, actual=D0
> GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
> IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
> IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
> Node 0x02 [Audio Output] wcaps 0x11: Stereo
> Device: name="ALC889A Analog", type="Audio", device=0
> Converter: stream=0, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x03 [Audio Output] wcaps 0x11: Stereo
> Converter: stream=0, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x04 [Audio Output] wcaps 0x11: Stereo
> Converter: stream=0, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x05 [Audio Output] wcaps 0x11: Stereo
> Converter: stream=0, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
> Control: name="IEC958 Playback Con Mask", index=0, device=0
> Control: name="IEC958 Playback Pro Mask", index=0, device=0
> Control: name="IEC958 Playback Default", index=0, device=0
> Control: name="IEC958 Playback Switch", index=0, device=0
> Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
> Device: name="ALC889A Digital", type="SPDIF", device=1
> Converter: stream=0, channel=0
> Digital: Enabled
> Digital category: 0x0
> IEC Coding Type: 0x0
> PCM:
> rates [0x5e0]: 44100 48000 88200 96000 192000
> bits [0x1e]: 16 20 24 32
> formats [0x1]: PCM
> Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Control: name="Capture Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Capture Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Device: name="ALC889A Analog", type="Audio", device=0
> Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
> Amp-In vals: [0x10 0x10]
> Converter: stream=0, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x24
> Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Control: name="Capture Volume", index=1, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Capture Switch", index=1, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Device: name="ALC889A Alt Analog", type="Audio", device=2
> Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
> Amp-In vals: [0x90 0x90]
> Converter: stream=0, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x23
> Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Control: name="Capture Volume", index=2, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Capture Switch", index=2, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
> Amp-In vals: [0x90 0x90]
> Converter: stream=0, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x22
> Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
> Control: name="IEC958 Capture Switch", index=0, device=0
> Control: name="IEC958 Capture Default", index=0, device=0
> Device: name="ALC889A Digital", type="SPDIF", device=1
> Converter: stream=1, channel=0
> SDI-Select: 0
> Digital: Enabled
> Digital category: 0x0
> IEC Coding Type: 0x0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0x1e]: 16 20 24 32
> formats [0x1]: PCM
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x1f
> Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Control: name="Mic Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Mic Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Line Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=2, ofs=0
> Control: name="Line Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=2, ofs=0
> Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
> Connection: 10
> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
> Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> Control: name="Headphone Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80]
> Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
> Amp-Out vals: [0x34 0x34]
> Connection: 2
> 0x02 0x0b
> Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> Control: name="Speaker Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80]
> Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
> Amp-Out vals: [0x34 0x34]
> Connection: 2
> 0x03 0x0b
> Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80]
> Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
> Amp-Out vals: [0x40 0x40]
> Connection: 2
> 0x04 0x0b
> Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80]
> Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
> Amp-Out vals: [0x40 0x40]
> Connection: 2
> 0x05 0x0b
> Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Speaker Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x0000373c: IN OUT HP Detect
> Vref caps: HIZ 50 GRD 80 100
> Pin Default 0x90100140: [Fixed] Speaker at Int N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0x4, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 5
> 0x0c 0x0d* 0x0e 0x0f 0x26
> Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Headphone Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x0000373c: IN OUT HP Detect
> Vref caps: HIZ 50 GRD 80 100
> Pin Default 0x012b4050: [Jack] HP Out at Ext Rear
> Conn = Comb, Color = Green
> DefAssociation = 0x5, Sequence = 0x0
> Pin-ctls: 0xc4: OUT HP VREF_80
> Unsolicited: tag=01, enabled=1
> Connection: 5
> 0x0c* 0x0d 0x0e 0x0f 0x26
> Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0000003c: IN OUT HP Detect
> Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Unsolicited: tag=00, enabled=0
> Connection: 5
> 0x0c 0x0d 0x0e* 0x0f 0x26
> Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0000003c: IN OUT HP Detect
> Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Unsolicited: tag=00, enabled=0
> Connection: 5
> 0x0c 0x0d 0x0e 0x0f* 0x26
> Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0000373c: IN OUT HP Detect
> Vref caps: HIZ 50 GRD 80 100
> Pin Default 0x90a00110: [Fixed] Mic at Int N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 5
> 0x0c* 0x0d 0x0e 0x0f 0x26
> Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0000373c: IN OUT HP Detect
> Vref caps: HIZ 50 GRD 80 100
> Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Pin-ctls: 0x20: IN VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 5
> 0x0c* 0x0d 0x0e 0x0f 0x26
> Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Line Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0000373c: IN OUT HP Detect
> Vref caps: HIZ 50 GRD 80 100
> Pin Default 0x018b3020: [Jack] Line In at Ext Rear
> Conn = Comb, Color = Blue
> DefAssociation = 0x2, Sequence = 0x0
> Pin-ctls: 0x20: IN VREF_HIZ
> Unsolicited: tag=03, enabled=1
> Connection: 5
> 0x0c* 0x0d 0x0e 0x0f 0x26
> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x0000373c: IN OUT HP Detect
> Vref caps: HIZ 50 GRD 80 100
> Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Pin-ctls: 0x20: IN VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 5
> 0x0c* 0x0d 0x0e 0x0f 0x26
> Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x00000020: IN
> Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Node 0x1d [Pin Complex] wcaps 0x400000: Mono
> Pincap 0x00000020: IN
> Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
> Pincap 0x00000010: OUT
> Pin Default 0x014be060: [Jack] SPDIF Out at Ext Rear
> Conn = Comb, Color = White
> DefAssociation = 0x6, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Connection: 1
> 0x06
> Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
> Pincap 0x00000020: IN
> Pin Default 0x01cbe030: [Jack] SPDIF In at Ext Rear
> Conn = Comb, Color = White
> DefAssociation = 0x3, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
> Processing caps: benign=0, ncoeff=17
> Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
> Volume-Knob: delta=0, steps=32, direct=0, val=63
> Unsolicited: tag=00, enabled=0
> Connection: 0
> Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
> Connection: 11
> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
> Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
> Connection: 11
> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
> Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
> Connection: 11
> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
> Node 0x25 [Audio Output] wcaps 0x11: Stereo
> Converter: stream=0, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x80 0x80]
> Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
> Amp-Out vals: [0x40 0x40]
> Connection: 2
> 0x25 0x0b
>
> On Apr 5, 2017, at 0:02, René Rebe <rene at exactcode.de> wrote:
>
>> Hi,
>>
>> recently I wanted to connect my low noise mic pre-amp via optical spdif to a spare "10 year” old MacBook or MacBookPro.
>> Those indeed have a optical input in the 3.5mm headphone jack. On macOS this also works and works as expected.
>>
>> On Linux, however, no matter what I do I only get zeros when recording the -D iec958.
>>
>> In /proc I see 3 capture sub-devices, where the 2nd is labeled:
>>
>> # cat /proc/asound/card0/pcm1c/info
>> ...
>> id: ALC889A Digital
>> name: ALC889A Digital
>> ...
>>
>> The behavior is the same on booth the MacBook as well as the MacBook Pro with either of those PCI devices:
>>
>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
>> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
>>
>> I have the feeling there could be some auto sensing be involved, as in the macOS system preferences I see the input switching from Mic to Optical Input as soon as I plugin in an active fibre.
>>
>> As I’m not familiar with this Intel HD stuff, any hint how to start analyzing and poking this mystery would be highly appreciated.
>>
>> Best regards,
>> René
>>
>> --
>> ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
>> http://exactcode.com | http://exactscan.com | http://ocrkit.com | http://t2-project.org | http://rene.rebe.de
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel at alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> --
> ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
> http://exactcode.com | http://exactscan.com | http://ocrkit.com | http://t2-project.org | http://rene.rebe.de
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
--
ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
http://exactcode.com | http://exactscan.com | http://ocrkit.com | http://t2-project.org | http://rene.rebe.de
More information about the Alsa-devel
mailing list